Sweat, as a biofluid that is easy to extract and contains a variety of biomarkers, can provide various types of physiological information for health monitoring. In recent years, research on wearable sensors for sweat sensing has been emerging continuously. Wearable sweat sensing will probably become an alternative method to traditional chemical analysis. This is due to its advantages of portability, non-invasiveness, comfort, and continuous monitoring. Since the inception of this research field, wearable sweat sensors have achieved significant development in terms of materials, structures, systems, and application directions. Research interests are gradually evolving from single biomarker detection to the pursuit of multi-channel, multi-modal system-level architecture. The analysis of physiological signals has also developed from single signal characterization to omics analysis using multiple physiological information sources. Based on the changes mentioned above, this paper mainly introduces the latest researches of wearable sweat sensors from the aspects of strategy, architecture, material, system, data processing, etc., and tries to summarize the trends of sweat sensors. Finally, this paper analyzes the challenges faced by the sensing platform and possible methods for optimization.
By using different customized microfluidic chips, a multifunctional rapid PCR platform allows fast screening of suspected cases within 15 min, followed by rapidly providing precise quantification of the SARS-CoV-2 virus.
In this paper, we present a highly sensitive and selective detection of serum carcinoembryonic antigen (CEA) based on silicon nanowire (SiNW) array device. With the help of traditional microfabrication technology, low-cost and highly controllable SiNW array devices were fabricated. After a series of surface modification processes, SiNW array biosensors show rapid and reliable response to CEA; the detection limit of serum CEA was 10 fg/mL, the current signal is linear with the logarithm of serum CEA concentration in the range of 10 fg/mL to 100 pg/mL. In this work, SiNW array biosensors can obtain strong signal and high signal-to-noise ratio; these advantages can reduce the production cost of the SiNW-based system and promote the application of SiNWs in the field of tumor marker detection.
Mycoplasma pneumonia (MP) is a common respiratory infection generally treated with macrolides, but resistance mutations against macrolides are often detected in mycoplasma pneumoniae in China. Rapid and accurate identification of mycoplasma pneumoniae and its mutant type is necessary for precise medication. This paper presents a 3D-printed microfluidic device to achieve this. By 3D printing, the stereoscopic structures such as microvalves, reservoirs, drainage tubes, and connectors were fabricated in one step. The device integrated commercial polymerase chain reaction (PCR) tubes as PCR chambers. The detection was a sample-to-answer procedure. First, the sample, a PCR mix, and mineral oil were respectively added to the reservoirs on the device. Next, the device automatically mixed the sample with the PCR mix and evenly dispensed the mixed solution and mineral oil into the PCR chambers, which were preloaded with the specified primers and probes. Subsequently, quantitative real-time PCR (qPCR) was carried out with the homemade instrument. Within 80 min, mycoplasma pneumoniae and its mutation type in the clinical samples were determined, which was verified by DNA sequencing. The easy-to-make and easy-to-use device provides a rapid and integrated detection approach for pathogens and antibiotic resistance mutations, which is urgently needed on the infection scene and in hospital emergency departments.
Alzheimer’s disease (AD) early screening requires non-invasive, high-sensitivity detection of low-abundance biomarkers in complex biofluids like saliva. In this study, we present a miniaturized, silicon-based electrochemical sensor for sequential detection of two AD salivary biomarkers, lactoferrin (Lf) and amyloid β-protein 1-42 (Aβ1-42), on a single reusable electrode. The sensor features a three-electrode system fabricated by sputter-coating a quartz substrate with gold (Au) sensing electrodes, which are further modified with gold nanoparticles (AuNPs) to form 3D dendritic structures that enhance surface area and electron transfer. To improve specificity, immunomagnetic beads (MBs) are employed to selectively capture and isolate target biomarkers from saliva samples. These MB–biomarker complexes are introduced into a polydimethylsiloxane chamber aligned with Au sensing electrodes, where a detachable magnet localizes the complexes onto the electrode surface to amplify redox signals. The AuNPs/MBs sensor achieves detection limits of 2 μg/mL for Lf and 0.1 pg/mL for Aβ1-42, outperforming commercial ELISA kits (37.5 pg/mL for Aβ1-42) and covering physiological salivary concentrations. After the MBs capture the biomarkers, the sensor can output the result within one minute. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements confirm enhanced electron transfer kinetics on AuNP-decorated surfaces, while linear correlations (R2 > 0.95) validate quantitative accuracy across biomarker ranges. The compact and integrated design eliminates reliance on bulky instrumentation and enables user-friendly operation, establishing a promising platform for portable, cost-effective AD screening and monitoring.
Nitrogen dioxide (NO2) gas detection is crucial for atmospheric environmental safety, industrial production monitoring, and traffic exhaust emission control. Reported detection devices often suffer from poor portability, insufficient selectivity, and demanding application requirements. Herein, we present a portable high-specificity and sensitivity NO2 gas sensor based on silicon nanowire array field-effect transistors (SiNW FETs). The NO2 gas sensor is fabricated on a (111) silicon-on-insulator (SOI) by the standard MEMS technology, which achieving high consistency in the dimensions of silicon nanowires. The experimental results demonstrated that the as-fabricated NO2 gas sensor has a high sensitivity of 20 kΩ ppm−1 and a detectable minimum NO2 concentration of 1.31 ppm. In addition, the NO2 gas sensor exhibits a remarkable specificity, as evidenced by its significantly higher response to NO2 compared to SO2, CO, NH3, O3, C2H5OH and air. The developed portable sensor signal processing system achieves real-time monitoring and display of NO2 concentration in the atmosphere. Furthermore, this research provides a high precision, easy installation and low cost NO2 detector, indicating a good potential for industrial and civil applications in the future.