The unique electronic properties of semiconductor nanowires, in particular silicon nanowires (SiNWs), are attractive for the label-free, real-time, and sensitive detection of various gases. Therefore, over the past two decades, extensive efforts have been made to study the gas sensing function of NWs. This review article presents the recent developments related to the applications of SiNWs for gas sensing. The content begins with the two basic synthesis approaches (top-down and bottom-up) whereby the advantages and disadvantages of each approach have been discussed. Afterwards, the basic sensing mechanism of SiNWs for both resistor and field effect transistor designs have been briefly described whereby the sensitivity and selectivity to gases after different functionalization methods have been further presented. In the final words, the challenges and future opportunities of SiNWs for gas sensing have been discussed.

A full-band ensemble Monte Carlo simulation has been used to study the high-field carrier transport properties of $\text{4H}$ -SiC. The complicated band structure of $\text{4H}$ -SiC requires the consideration of band-to-band tunneling at high electric fields. We have used two models for the band-to-band tunneling; one is based on the overlap test and the other on the solution of the multiband Schrödinger equations. The latter simulations have only been performed for holes in the $c$ -axis direction, since the computer capacity requirement are exceedingly high. Impact-ionization transition rates and phonon scattering rates have been calculated numerically directly from the full band structure. Coupling constants for the phonon interaction have been deduced by fitting of the simulated low-field mobility as a function of lattice temperature to experimental data. Secondary hot electrons generated as a consequence of hole-initiated impact ionization are considered in the study for both models of band-to-band tunneling. When the multiband Schrödinger equation model is used for holes in the $c$ -axis direction, a significant change in the electron energy distribution is found, since the hole impact-ionization rate is very much increased with this model. The secondary electrons increase the average energy of the electron distribution leading to a significant increase in the electron-initiated impact-ionization coefficients. Our simulation results clearly show that both electrons and holes have to be considered in order to understand electron-initiated impact ionization in $\text{4H}$ -SiC.

A horizontal printed Write-Once-Read-Many (WORM) resistive memory has been developed for use in wireless sensor tags targeting single-event detection in smart packaging applications. The WORM memory can be programmed using a 1.5-V printed battery. An alternative programming method is to use chemical sintering which allows the development of exposure-time triggered single event tags that can be accessed wirelessly. The new WORM memory has very low losses in the ON-state which allows direct integration into antenna structures. A sensor tag that utilizes the WORM memory functionality and the well established Electronic Article Surveillance (EAS) communication standard has been outlined. Both active and fully passive sensor tag solutions have been proposed. The role of printed electronics in smart packaging applications has been reviewed and discussed. Important enabling factors for the future development have been highlighted, such as the need for hierarchical design and test tools, better printed interconnect technologies as well as better components that allow communication with existing information and communication technology (ICT) standards. This is illustrated and underlined by the presented smart packaging concept demonstrators.

There is an increasing demand for compact, reliable and versatile sensor concepts for pH-level monitoring within several industrial, chemical as well as bio-medical applications. Many pH sensors concepts have been proposed, however, there is still a need for improved sensor solutions with respect to reliability, durability and miniaturization but also for multiparameter sensing. Here we present a conceptual verification, which includes theoretical simulations as well as experimental evaluation of a fiber optic pH-sensor based on a bio-compatible pH sensitive material not previously used in this context. The fiber optic sensor is based on a Mach-Zehnder interferometric technique, where the pH sensitive material is coated on a short, typically 20-25 mm thin core fiber spliced between two standard single mode fibers. The working principle of the sensor is simulated by using COMSOL Multiphysics. The simulations are used as a guideline for the construction of the sensors that have been experimentally evaluated in different liquids with pH ranging from 1.95 to 11.89. The results are promising, showing the potential for the development of bio-compatible fiber optic pH sensor with short response time, high sensitivity and broad measurement range. The developed sensor concept can find future use in many medical- or bio-chemical applications as well as in environmental monitoring of large areas. Challenges encountered during the sensor development due to variation in the design parameters are discussed.