The design of newer ultrasonic imaging systems attempts to obtain low-cost, small-sized devices with reduced power consumption that are capable of reaching high frame rates with high image quality. In this regard, synthetic aperture techniques have been very useful. They reduce hardware requirements and accelerate information capture. However, the beamforming process is still very slow, limiting the overall speed of the system. Recently, general-purpose computing on graphics processing unit techniques have been proposed as a way to accelerate image composition. They provide excellent computing power with which a very large volume of data can easily and quickly be processed. This paper describes a new system architecture that merges both principles. Thus, using a minimum-redundancy synthetic aperture technique to acquire the signals (2R-SAFT), and a graphics processing unit as a beamformer, we have developed a new scanner with full dynamic focusing, both on emission and reception, that attains real-time imaging with very few resources.

In this work, a high-resolution imaging method for the inspection of isotropic plate-like structures using linear arrays and Lamb waves is proposed. The evaluation of these components is limited by the low dynamic range resulting from main lobe and side lobe field patterns, and from the narrowband nature of the Lamb waves. Based on a full matrix array, synthetic aperture technique using all emitter-receiver combinations, different images from the same object are obtained by using different apodization coefficients, which are related to a trade-off between main lobe width and relative side lobe level. Several image compounding strategies have been tested and a new algorithm, based on apodization and polarity diversities between signals, is proposed. However, some effects, such as the dead zone close to the array and reverberations caused by interactions of the wavefront and defects, still limit the quality of the images. The use of spatial diversity, obtained by an additional array, introduces complementary information about the defects and improves the results of the proposed algorithm, producing high-resolution, high-contrast images. Experimental results are shown for a 1-mm-thick isotropic aluminum plate with artificial defects using linear arrays formed by 30 piezoelectric elements, with the low dispersion symmetric mode S0 at the frequency of 330 kHz.