A type of telecommunication technology called an ultra-wideband (UWB) is used to provide a typical solution for short-range wireless communication due to large bandwidth and low power consumption in transmission and reception. Printed monopole antennas are considered as a preferred platform for implementing this technology because of its alluring characteristics such as light weight, low cost, ease of fabrication, integration capability with other systems, etc. Therefore, a compact-sized ultra-wideband (UWB) printed monopole antenna with improved gain and efficiency is presented in this article. Computer simulation technology microwave studio (CSTMWS) software is used to build and analyze the proposed antenna design technique. This broadband printed monopole antenna contains a jug-shaped radiator fed by a coplanar waveguide (CPW) technique. The designed UWB antenna is fabricated on a low-cost FR-4 substrate with relative permittivity of 4.3, loss tangent of 0.025, and a standard height of 1.6 mm, sized at 25 mm × 22 mm × 1.6 mm, suitable for wireless communication system. The designed UWB antenna works with maximum gain (peak gain of 4.1 dB) across the whole UWB spectrum of 3–11 GHz. The results are simulated, measured, and debated in detail. Different parametric studies based on numerical simulations are involved to arrive at the optimal design through monitoring the effects of adding cuts on the performance of the proposed antennas. Therefore, these parametric studies are optimized to achieve maximum antenna bandwidth with relatively best gain. The proposed patch antenna shape is like a jug with a handle that offers greater bandwidth, good gain, higher efficiency, and compact size.

This paper presents a compact frequency reconfigurable antenna for flexible devices and conformal surfaces. The antenna consists of a simple easy to fabricate structure consisting of a stub loaded circular radiator, designed on commercially available RT5880 flexible substrate (εr = 2.2) with a thickness of 0.254 mm. The combination of stub loading and slot etching techniques are utilized to achieve the advantages of compactness, frequency reconfigurability, wide impedance bandwidth, and stable radiation pattern with structural conformability. The frequency reconfigurability is achieved by employing two p-i-n diodes. Simulated and experimental results showed that the antenna operates in various important commercial bands, such as S-band (2 GHz– 4 GHz), Wi-Max (3.5 GHz and 5.8 GHz), Wi-Fi (3.6 GHz, 5 GHz, and 5.9 GHz), 5G sub-6-GHz (3.5 GHz and 4.4 GHz – 5 GHz), and ITU-band (7.725 GHz – 8.5 GHz) with the additional advantages of structural conformability. Furthermore, the performance comparison of the proposed flexible antenna with the state-of-the-art flexible antennas in terms of compactness, frequency reconfigurability, and number of operating bands demonstrates the novelty of the proposed antenna and its potential application in heterogeneous applications.

In this article, a compact printed monopole dual-band antenna using artificial magnetic conductor (AMC)-plane with improved gain and broader bandwidth, applicable for off-body internet of things (IoT) devices is presented. The monopole antenna consists of two C-shaped resonators connected through a U-shaped monopole, parasitic elements, discrete ground circular rings and a co-planar waveguide (CPW) feedline. Each artificial magnetic conductor (AMC) unit cell consists of a slotted circular and a square stubs, designed with two zero-crossing phases for improving the radiation characteristics and to achieve the high gain. The overall size of the proposed AMC-backed antenna is 44.4 mm × 44.4 mm × 1.6 mm with electrical dimensions of 0.75λg×0.75λg×0.027λg. This AMC-backed antenna featured measured bandwidths of 9.6% and 12.4% with improved measured gain values of 4.88 dB and 4.73 dB at 2.45 GHz and 5.8 GHz, respectively. The specific absorption rate (SAR) values are analysed and found to be 1.58 W/kg at 2.45 GHz and 0.9 W/kg at 5.8 GHz. Therefore, the proposed AMC-backed antenna is useful for off-body IoT devices operating at 2.45 and 5.8 GHz industrial, scientific, and medical (ISM) band applications.

This research article proposes a compact frequency and pattern reconfigurable flexible antenna for heterogeneous applications. A triangular monopole antenna with a semicircular stub is made frequency and pattern tunable by connecting and disconnecting two inverted L-shaped stubs utilizing diodes. When either of the stubs is connected to the radiator, a relative phase difference happens at both ends of the radiator that changes the direction of the electromagnetic radiations, consequently pattern reconfigurability can be obtain. Besides that, because of the reactive load introduced by the stubs, the antenna’s effective length has changed and, as a result, the frequency reconfigurability can be attained. The antenna features a compact size of 40 × 50 × 0.254 mm³ corresponding to 0.22λ_o × 0.27λ_o × 0.001λ_o, where λ_o is free-space wavelength at 1.65 GHz, while its operational bandwidth is from 1.65 GHz to 2.51 GHz, with an average gain and radiation efficiency of better than 2.2 dBi and 80%, exhibiting a pattern reconfigurability of 180° in the E-plane. The frequency of the proposed antenna can be switched from 2.1 GHz to 1.8 GHz by switching the state of both diodes in OFF and ON-state, respectively. The fabricated prototype of the antenna is tested to verify its performance parameters. In addition, to validate the proposed design, it has been compared with prior arts in terms of the overall size, reconfigurability type, flexibility, radio frequency (RF) switch type used for reconfigurability, and frequency bandwidth. The proposed antenna provides smaller size with a large bandwidth coverage alongside with discrete RF switch type with the advantages of flexibility and both frequency and pattern reconfigurability. As a result, the proposed compact flexible and pattern reconfigurable antenna is a promising candidate for heterogeneous applications, including the global system for mobile (GSM) band (1800 and 1900 MHz) and industrial, scientific and medical (ISM) band (2.4 GHz) along with well-known cellular communication bands of 3G, 4G, and long term evolution (LTE) bands ranging from 1700–2300 MHz around the globe.

A printed monopole antenna for millimeter-wave applications in the 5G frequency region is described in this research. As a result, the proposed antenna resonates in three frequency bands that are designated for 5G communication systems, including 28 GHz, 38 GHz, and 60 GHz (V band). For the sake of compactness, the coplanar waveguide (CPW) method is used. The overall size of the proposed tri-band antenna is 4 mm × 3 mm × 0.25 mm. Using a watch strap and human tissue, such as skin, the proposed antenna gives steady results. At 28 GHz, 38 GHz, and 60 GHz, the antenna’s gain is found to be 5.29 dB, 7.47 dB, and 9 dB, respectively. The overall simulated radiation efficiency is found to be 85% over the watch strap. Wearable devices are a great fit for the proposed tri-band antenna. The antenna prototype was built and tested in order to verify its performance. It can be observed that the simulated and measured results are in close contact. According to our comparative research, the proposed antenna is a good choice for smart 5G devices because of its small size and simple structure, as well as its high gain and radiation efficiency.

To reduce interference from other wireless communications, a smaller super wideband frequency diversity hexagonal monopole antenna with switchable rejection band capabilities is proposed. The patch has the shape of hexagonal with an open-ended horizontal slot that divides the patch into upper and lower parts. The notch switchable features and the frequency diversity are controlled by changing the length of the resonator through alternating the state of two inserted parallel PIN diodes inside the horizontal open-ended slot. The upper part of the hexagonal patch is connected to the negative terminal of the diodes and the biasing circuit in the bottom layer through a conducting pin while the lower part is connected to the positive terminal of the diode. When both diodes are OFF the antenna works as a super wideband covering a bandwidth that starts at 3.37 and ends at 27.71 GHz. When both diodes are ON, a frequency band 3.81 – 6.62 GHz is filtered, and a band notch has appeared. The antenna’s radiation pattern is broadsided directional, and the efficiency reached 92.9 % and 96 % for the ON and OFF cases respectively. The reflection coefficient (S11) at the rejection reaches -3.06 dB at 5.38 GHz. The suggested design’s overall size is 36 mm × 36 mm × 1.6 mm on an FR-4 substrate material with a loss tangent of tanδ = 0.02. Hence, the proposed super wideband antenna is well-suited for applications in wireless communications.