Drainage conditions are supposed to have significant influence on sand liquefaction behavior. An infiltration device was utilized in cyclic triaxial tests to reproduce different drainage conditions by altering dry density of the within silt. Permeability coefficient ratio (kp) was utilized for quantifying the drainage boundary effect. Cyclic triaxial tests were conducted on saturated Fujian standard sand samples. Test results were used to evaluate the liquefaction potential by using the energy approach. It can be concluded that, if kp increases slightly bigger than zero, excess pore water pressure (EPWP) will respond more fiercely, and the dissipated energy that triggers sand liquefaction will be less. By considering kp, an energy-based database was built by taking kp into consideration and different neural network (NN) models were constructed to predict liquefaction potential by energy approaches accurately under different drainage boundary conditions. It was suggested that the neuro-fuzzy (NF)-based NN model has more satisfactory performance.
Operating data from tunnel boring machines (TBMs) capture the state of both the machine and the ground, and accurate forecasting of their evolving operating variables is essential for assessing rock-mass stability and improving construction efficiency. However, it is difficult for the current methods to predict multivariate TBM driving parameters accurately. Therefore, a novel multivariable time series prediction method was proposed based on Convolution–GRU–Attention (CGA) neural networks. Initially, data preprocessing such as effective data extraction, segmentation, status judgment, and correlation analysis is applied to raw TBM excavation data to construct a parameter database encompassing 5987 TBM excavation cycles. Subsequently, the forecasting model is trained, incorporating techniques such as cross-validation, to ensure accurate predictions of excavation parameter trends. With the average coefficient of determination () for total cutterhead thrust prediction reaching 0.883, and for cutterhead torque prediction achieving 0.923, the evaluation performance of the CGA model with a filter is better than GRU and BPNN. The results demonstrate that the proposed CGA model provides reliable predictions of key TBM operational parameters and offers useful insights into the evolution of TBM excavation behavior.