The rapid urbanization process brings consequences to urban environments, such poor air quality and the urban heat island issues. Due to these effects, environmental monitoring is gaining attention with the aim of identifying local risks and improving cities’ liveability and resilience. However, these environments are very heterogeneous, and high-spatial-resolution data are needed to identify the intra-urban variations of physical parameters. Recently, wearable sensing techniques have been used to perform microscale monitoring, but they usually focus on one environmental physics domain. This paper presents a new wearable system developed to monitor key multidomain parameters related to the air quality, thermal, and visual domains, on a hyperlocal scale from a pedestrian’s perspective. The system consisted of a set of sensors connected to a control unit settled on a backpack and could be connected via Wi-Fi to any portable equipment. The device was prototyped to guarantee the easy sensors maintenance, and a user-friendly dashboard facilitated a real-time monitoring overview. Several tests were conducted to confirm the reliability of the sensors. The new device will allow comprehensive environmental monitoring and multidomain comfort investigations to be carried out, which can support urban planners to face the negative effects of urbanization and to crowd data sourcing in smart cities.

This article aims to estimate the reduction of potable water consumption and sewage generation in the city of Joinville, southern Brazil. Four strategies were considered to promote potable water savings: replacement of conventional toilets with dual-flush ones, greywater reuse, rainwater harvesting, and the combination of these three strategies. Residential, public, and commercial sectors were assessed. The potential for potable water savings ranged from 1.7% to 50.5%, and the potential for sewage generation reduction ranged from 2.1% to 52.1%. The single-family residential sector was the most representative for water savings and sewage generation reduction. The public sector would be the least contributor to such reductions. It was found that in the city of Joinville, for low non-potable water demands, greywater reuse was the most viable strategy to save water. When non-potable demand is high and there is a large catchment area, it is recommended to install rainwater harvesting systems. It was concluded that there is a high potential for potable water savings and reduction of sewage generation if measures were adopted in Joinville, but it is necessary to evaluate which strategy is the most appropriate for each building.