A system’s operational life cycle now includes an integrated health management and diagnostic strategy due to improvements in the current technology. It is evident that the life cycle may be used to identify abnormalities, analyze failures, and forecast future conditions based on current data. Data models can be trained using machine learning and statistical ideas, employing condition data and on-site feedback. Once data models are trained, the data-processing logic can be integrated into onboard controllers, allowing for real-time health evaluation and analysis. Interestingly, the oil and gas industries may encounter numerous obstacles and hurdles as a result of the integration, highlighting the need for creative solutions to the perplexing problem. The potential benefits in terms of challenges involving feature extraction and data classification, machine learning has received significant research attention recently. The application and utility in pump system health management should be investigated to explore the extend it can be used to increase overall system resilience or identify potential financial advantages for maintenance, repair, and overhaul activities. This is seen as an evolving research area, with a variety of application domains. This article present a critical analysis of machine learning’s most current advances in the field of artificial intelligence-based system health management, specifically in terms of pump applications in the oil and gas industries. To further understand its potential, various algorithms and related theories are examined. Based on the examined studies, machine learning shows potential for prognostics and defect diagnosis. There are, few drawbacks that is seen to be preventing its widespread adoption which prompt for further improvement. The article discussed possible solutions to the identified drawbacks and future opportunities presented. This study further elaborates on the commonly available commercial machine learning (ML) tools used for pump fault prognostics and diagnostics with an emphasis on the type of data utilized. Findings from the literature review shows that the neural network (NN) is the most prevalent algorithm employed in studies, followed by the Bayesian network (BN), support vector machine (SVM), and hybrid models. While the need for selecting appropriate training algorithms is seen to be significant. Interestingly, no specific method or algorithm exists for a given problem instead the solution relies on the type of data and the algorithm’s or method’s aptitude for resolving the provided errors. Among the various research studies on pump fault diagnosis and prognosis, the most frequently discussed problem is a bearing fault, with a percentage of 46%, followed by cavitation. The studies rank seal damage as the third most prevalent flaw. Leakage and obstruction are the least studied defects in research. The main data types used in machine learning techniques for diagnosing pump faults are vibration and flow, which might not be sufficient to identify the condition of pumps and their characteristics. The various datasets have been derived from expert opinion, real-world observations, laboratory tests, and computer simulations. Field data have frequently been used to create experimental datasets and simulated data. In comparison to the algorithmic approach, the data approach has not received significant research attention.

Pool fires cause immense damage to fuel storage tank farms. Reduced fire escalation risk in tank farms improves fire safety. Computational fluid dynamics (CFD) has proven effective in assessing escalation of fire-related domino effects and is being utilized for pool fire consequences in tank farms. The past CFD-based analysis focused on primary fire effects on secondary targets. This study used fire dynamics simulator (FDS) to model complete evolution of the domino effect under different wind speeds and primary pool fire locations. Dynamic escalation probability (DEP) and fire spread probability of the tank farm were calculated. Offset tank failure increased by 3% and 31%, while inline tank failure dropped by 36% and 90%, at 2 and 8 m/s, respectively. An artificial neural network (ANN) incorporating the Levenberg–Marquardt algorithm is used to predict fire spread probability based on numerical data set. The use of ANNs for this purpose is one of the first attempts in this regard. ANNs can reliably predict dynamic fire spread probability and could be utilized to manage fire-induced domino effects. Moreover, dynamic fire spread probability in tank farms obtained from ANN modelling can be used for safety applications, such as updating mitigation time when fire spread probability is unacceptable for a specific wind speed.

In the energy management of district cooling plants, the thermal energy storage tank is critical. As a result, it is essential to keep track of TES results. The performance of the TES has been measured using a variety of methodologies, both numerical and analytical. In this study, the performance of the TES tank in terms of thermocline thickness is predicted using an artificial neural network, support vector machine, and k-nearest neighbor, which has remained unexplored. One year of data was collected from a district cooling plant. Fourteen sensors were used to measure the temperature at different points. With engineering judgement, 263 rows of data were selected and used to develop the prediction models. A total of 70% of the data were used for training, whereas 30% were used for testing. K-fold cross-validation were used. Sensor temperature data was used as the model input, whereas thermocline thickness was used as the model output. The data were normalized, and in addition to this, moving average filter and median filter data smoothing techniques were applied while developing KNN and SVM prediction models to carry out a comparison. The hyperparameters for the three machine learning models were chosen at optimal condition, and the trial-and-error method was used to select the best hyperparameter value: based on this, the optimum architecture of ANN was 14-10-1, which gives the maximum R-Squared value, i.e., 0.9, and minimum mean square error. Finally, the prediction accuracy of three different techniques and results were compared, and the accuracy of ANN is 0.92%, SVM is 89%, and KNN is 96.3%, concluding that KNN has better performance than others.

This study’s primary goal is to evaluate the performance of a large thermal energy storage tank installed in a Gas District Cooling (GDC) plant. The performance parameters considered in this study include thermocline thickness (WTc), Cumulated Charge (Q_cum), and Half Figure of Merit (½ FOM). The operation sensor data of a large Thermal Energy Storage (TES) tank was acquired for this analysis. The recorded temperature sensor from the 1st to 7th January and from 12th to 17th October 2019 was considered in this research. GraphPad prism computer software was deployed for analyses, and the temperature distribution data were analyzed to determine the four temperature parameters (hot water temperature (Th), cool water temperature (Tc), cool water depth (C), and slope gradient (S)) using a non-linear regression curve fitting technique and sigmoid Dose Responses function as integrated with the software. At the end of this research, the relationship between the growth of the determined performance parameter with charging hours was analyzed and presented. The research results proved the ability of GraphPad Prism software to assess the temperature distribution in the TES tank and also the corresponding effects on the overall Tank performance. The software offers better advantages in evaluating the performance parameter of the TES tank accurately.

District cooling (DC) systems have recently proven to be more economically and environmentally viable as compared to conventional cooling techniques. In most DC setups, electric centrifugal chillers (ECCs) are installed to provide chilled water (CW) to charge the thermal energy storage (TES) tank or for direct CW supply to the DC network. The operation of these ECC systems consumes most of the electrical power supplied to the entire DC plant; this therefore strengthens the need to conduct a comprehensive environmental assessment in order to quantify the indirect ecological impact resulting from the energy consumed in the ECC system operation. In order to achieve this, a case study was conducted of four ECC systems with a use-life of 25 years installed in a large DC plant in Malaysia. A gate-to-gate life cycle assessment (LCA) methodology was adopted to analyze the environmental performance of the system setup. The result of the study year reveals that April and June account for the highest and lowest environmental impact, respectively. The influence of climatic temperature conditions on the monthly cooling and environmental load distribution was also observed from the results. Finally, in substantiating the study’s investigation, environmental performance based on the composition of two different electricity fuel mixes is discussed and compared. The results revealed a drastic decrease in environmental load as the ratio of non-renewable energy sources decreased in the composition of the mix, thereby reducing the contribution of the overall environmental impact of the ECC systems’ use phase.

In standard district cooling (DC) plants, central chillers produce cold energy for space cooling throughout the district network. In recent times, the integration of the vapor compression system, which includes the functionalities of vapor compression chillers (VCC), and thermal energy storage (TES) tanks in the DC setup, has gained more implementation across the globe. This is due to the possibility of load shifting by using the VCC to produce chilled water for charging the TES tanks during off peak periods. Since the environmental implications of various energy intensive systems are largely determined by the amount of material and energy consumed throughout their life cycle, it is critical to conduct a sustainability assessment of these systems in terms of environmental contributions, and suggest design options to reduce these impacts. A cradle to grave life cycle assessment (LCA) model is created in response to these issues and in order to meet the project’s objectives. The life cycle impact assessment (LCIA) results of the analysis reveal that the carbon footprint per 1 RTh of the produced chilled water is estimated at 0.72 kg CO₂ eq/RTh. The operation phase of the system’s life cycle accounted for the most impact, about 98%, with other life cycle phases having negligible contributions. In substantiating the study’s investigation, the environmental performance based on several design options were discussed and compared to the case study. Among the several scenarios considered, incorporating the Sweden mix technology provided the case study with the most significant environmental savings, of about 94%.