Background: The reconstruction of adipose tissue defects is often challenged by the complications that may occur following plastic and reconstructive surgery, including donor-site morbidity, implant migration and foreign body reaction. To overcome these problems, adipose tissue engineering (ATE) using stem cell-based regeneration strategies has been widely explored in the last years. Mounting evidence has shown that adipose-derived stem cells (ADSCs) represent a promising cell source for ATE. In the context of a small number of reports concerning adipose tissue regeneration using three-dimensional (3-D) systems, the present study was designed to evaluate the biological performance of a novel alginate matrix that incorporates human ADSCs (hADSCs). Results: Culture-expanded cells isolated from the stromal vascular fraction (SVF), corresponding to the third passage which showed the expression of mesenchymal stem cell (MSC) markers, were used in the 3-D culture systems. The latter represented a calcium alginate hydrogel, obtained by the diffusion of calcium gluconate (CGH matrix), and shaped as discoid-thin layer. For comparative purposes, a similar hADSC-laden alginate hydrogel cross-linked with calcium chloride was considered as reference hydrogel (RH matrix). Both hydrogels showed a porous structure under scanning electron microscopy (SEM) and the hADSCs embedded displayed normal spherical morphologies, some of them showing signs of mitosis. More than 85% of the entrapped cells survived throughout the incubation period of 7 days. The percentage of viable cells was significantly higher within CGH matrix at 2 days post-seeding, and approximately similar within both hydrogels after 7 days of culture. Moreover, both alginate-based hydrogels stimulated cell proliferation. The number of hADSC within hydrogels has increased during the incubation period of 7 days and was higher in the case of CGH matrix. Cells grown under adipogenic conditions for 21 days showed that both analyzed 3-D culture systems support adipogenic differentiation in terms of neutral lipid accumulation and perillipin expression. Furthermore, the cells encapsulated in CGH matrix displayed a more differentiated phenotype. Conclusions: The results of this study suggest that both CGH and RH matrices successfully support the survival and adipogenesis of hADSC. An enhancement of biological performance was detected in the case of CGH matrix, suggesting its promising application in ATE.
1 January 2000 in Polymer Degradation and Stability
The degree of intercalation of the polyvinyl alcohol‐starch blend with the layered silicate is increased if the silicates is untreated or intercalated with ammonium ions that contain small radicals. If untreated silicate like NaMMT is used, it is possible to obtain exfoliated‐intercalated nanocomposites. The materials based on PVOH, starch, and Nanocor I 28, Nanocor I 33, or Cloisite 15 A can be intercalated nanocomposites. If the blend of PVOH and starch is reinforced with Cloisite 93 A, microcomposites can result. The study will continue with the analysis of the new morphologies considering the transmission electron microscopy (TEM).
1 January 2000 in Polymer Degradation and Stability
Based on the FTIR spectral changes, the miscibility of some nanocomposites based on starch, polyvinyl alcohol and treated multilayered silicate, was qualitatively estimated. The FTIR spectroscopy provide evident gross/small spectral changes as well as appreciable spectral shifts mainly in those spectral range that defines hydroxyl O-H vibrations (3600- 3000 cm -1 ), water absorbtion (1800 - 1500 cm -1 ) , the morphological order degree and the interaction with multilayered silicate and (1192 - 950 cm -1 ). Based on the observed spectral modifications it can be estimate that high miscibility do exist between the components of the studied nanocomposites.
21 February 2016 in International Journal of Polymer Science
The degradability and processability of new renewable materials based on starch and PVOH were studied using the melt flow index (MFI) method by measuring the melt rheological properties which depend not only on the extrusion conditions and material formulation but also on the macromolecule characteristics which can be modified by chemical degradation. These results were correlated with other material properties like color and cross-linking degree. The obtained results show that flowing in the melted state of the studied materials is accompanied by a second process of chains chemical degradation. It was observed that, at the same level of additivation, under identical extrusion conditions, the melted blends with corn starch as main component are highly mechanically sensitive and degrade mostly by chains scission and those with PVOH as major component are highly temperature sensitive and degrade mainly by cross-linking. The obtained results show also that each PVOH-starch blend requires particular formulation and individual windows of melt processing conditions. These results are a good proof that the MFI method is a good path to study the degradability and moldability of process sensitive polymeric materials like those based on starch and PVOH.