Li Jiang

Li Jiang


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 July 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YLYiwei Lu
Yiwei Lu
YYYong Yang
Yong Yang
MZMing Zhang
Ming Zhang
RWRumeng Wang
Rumeng Wang
LJLi Jiang
Li Jiang
BQBin Qin
Bin Qin
Homogeneous magnetic field is widely used in various applications, and Helmholtz and Merritt coils are the most commonly used homogeneous field generators. However, only the field homogeneity at the center point is concerned in their design, which leads to restriction for most applications, where a certain volume of homogeneous field is required. This indicates that traditional coil configurations can be further optimized. Based upon a comprehensive definition of homogeneous field, improved three-s and four-coil configurations are proposed in this article. Practical formulae with normalized coil parameters are given to provide a convenient tool for designers. These formulae establish relationships between coil parameters and the required homogeneous field. The accuracy of the formulae is verified by the finite-element analysis. Comparisons with Merritt coils show that, when getting the same homogeneous field, the improved coils can reduce both power loss and conductor mass by up to 24.8%. Through a comparison among main coil configurations, the improved four-coil configuration is recommended for homogeneous magnetic field generation. For high-intensity magnetic field applications, the winding cross-section effect is analyzed. At last, experiments are performed to verify the theoretical analysis, and the reason why the improved coils have better performance than traditional ones is revealed.

27 July 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XDXi Deng
Xi Deng
CWChenguang Wan
Chenguang Wan
LJLi Jiang
Li Jiang
Ge GaoGe Gao
Ge Gao
YHYa Huang
Ya Huang
The three-phase two-level pulsewidth modulation (PWM) converter operates in rectification state or active inverter state according to the corresponding experimental requirements of Experimental Advanced Superconducting Tokamak. However, the current fault diagnosis methods proposed for PWM converters usually deal with only the rectification state or inverter state. To solve this problem, this article proposes a diagnosis method to detect single and double open-circuit faults under both the rectification state and active inverter state. First, an inception-based neural network diagnosis model is proposed, in which 1 × 1, 3 × 3, 5 × 5, and 7 × 7 convolution and 3 × 3 max-pooling processes are conducted in parallel at the input and the output and stacked together to generate the final output. Second, the model is trained using three-phase alternating current current signals to determine the location of open-switch faults with a large number of simulation data samples and fewer experimental data samples. Finally, the experimental result shows that the proposed model can accurately detect approximately 99.14% of the open-switch faults within 12.83 ms (<3/4 cycle) without an additional sensor. Furthermore, the result shows that the proposed model is robust to load voltage transient conditions and nonunity power factor conditions.

18 September 2020 in IEEE Access
Verified
Journal Article
Open access
YHYa Huang
Ya Huang
LJLi Jiang
Li Jiang
PFPeng Fu
Peng Fu
ZHZhengyi Huang
Zhengyi Huang
XXXuesong Xu
Xuesong Xu
Power electronic equipment regulated by the International Thermonuclear Experimental Reactor (ITER) organization must be tested in a relevant steady-state magnetic field immunity test, and the test area is generally required to be a cube shape. For this reason, a multiple square coil system structure is used. In this paper, a Taylor expansion and an optimization program are used to determine the optimal parameters of a coil system with different groups. For a three-coil system, the effects of the conductor cross-section, conductor spacing, helical structure, and conductor connection on the magnetic field uniformity are analyzed. A clear understanding of the influence degree of the error helps design an actual coil system. ITER organization is currently conducting research on magnetic field generator for electronic devices in large scientific devices. The design method proposed in this paper can reduce the design difficulty and provide theoretical support.

15 January 2020 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
YHYa Huang
Ya Huang
PFPeng Fu
Peng Fu
LJLi Jiang
Li Jiang
ZHZhengyi Huang
Zhengyi Huang
Power electronic equipment regulated by the International Thermonuclear Experimental Reactor (ITER) organization must pass the relevant steady-state magnetic field immunity test. To improve the design of the test system, the mathematical model of the multicoil square configuration system is established. The relationship between the dimension and the number of ampere-turns of the two-coil system and the three-coil system is studied. The design idea is extended to a system consisting of four or more coils. The factors affecting the magnetic field uniformity of the three-coil system are studied by using the finite element method (FEM). By comparing the simulation results with the measured values, the satisfactory test results can provide an excellent test system for the ITER static magnetic field immunity test.

2 April 2018 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
ZZZhen Zhang
Zhen Zhang
PFPeng Fu
Peng Fu
GGGe Gao
Ge Gao
LJLi Jiang
Li Jiang
LWLinsen Wang
Linsen Wang
In this paper, a new type of Rogowski digital integrator signal processing system has been developed for the dc test platform which located in the Institute of Plasma Physics. This signal processing system is mainly composed of the dual-coil subtraction structure and the digital signal filtering processing method that comb filter combined with high-pass filter (HPF) and low-pass filter (LPF). Trigger noise comes from the converter; it can be coupled to the integrator through distributive capacitance between dc bus bar and Rogowski coil; it will affect the integrator seriously; for example, the amplifier in integrator will be saturation, and the integrator cannot work, burrs lying in integration result. The dual-coil subtraction structure can attenuate the trigger noise significantly from hardware perspective and is convenient for the integrator to take a high gain without saturation. The comb filter combined with HPF and LPF can attenuate the trigger noise further and smooth the integration result. The experiment indicates that the approach proposed in this paper can reduce the impact of trigger noise on the integrator and improve the measurement accuracy.

14 April 2022 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
YLYiwei Lu
Yiwei Lu
YYYong Yang
Yong Yang
MZMing Zhang
Ming Zhang
RWRumeng Wang
Rumeng Wang
BZBoliang Zhu
Boliang Zhu
LJLi Jiang
Li Jiang
The large-scale high-intensity homogeneous magnetic field is an important resource to perform magnetic immunity tests for large scientific facilities. Generally, a multi-coil system with large cross-sectional area is used to generate the required test field, which has high power loss and conductor mass. In this article, we propose a novel method that introduces magnetically shielded room (MSR) to enhance the coil magnetic field and reduce power loss. The analytical model of the coil system based on MSR is established through the multi-reflection image method. In addition, the multi-objective optimization model is brought forward based on the non-dominated sorting genetic algorithm (NSGA-II). Theoretical results indicate that the magnetic field can be significantly enhanced under the presence of MSR. Consequently, prominent reductions in total current by about 61.4% and in total power loss by 75.5%–81.7% are achieved. Finally, the effectiveness of the theoretical result is numerically verified by the finite-element analysis (FEA). The proposed method provides a novel and promising way to reduce the power loss and conductor mass of such high-intensity magnet systems and other similar applications.