9 July 2021 in IEEE Transactions on Industrial Electronics
Homogeneous magnetic field is widely used in various applications, and Helmholtz and Merritt coils are the most commonly used homogeneous field generators. However, only the field homogeneity at the center point is concerned in their design, which leads to restriction for most applications, where a certain volume of homogeneous field is required. This indicates that traditional coil configurations can be further optimized. Based upon a comprehensive definition of homogeneous field, improved three-s and four-coil configurations are proposed in this article. Practical formulae with normalized coil parameters are given to provide a convenient tool for designers. These formulae establish relationships between coil parameters and the required homogeneous field. The accuracy of the formulae is verified by the finite-element analysis. Comparisons with Merritt coils show that, when getting the same homogeneous field, the improved coils can reduce both power loss and conductor mass by up to 24.8%. Through a comparison among main coil configurations, the improved four-coil configuration is recommended for homogeneous magnetic field generation. For high-intensity magnetic field applications, the winding cross-section effect is analyzed. At last, experiments are performed to verify the theoretical analysis, and the reason why the improved coils have better performance than traditional ones is revealed.
3 January 2024 in Medical Physics
1 May 2018 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
11 December 2021 in Nuclear Science and Techniques
26 November 2019 in International Journal of Modern Physics A
13 November 2017 in IEEE Transactions on Applied Superconductivity
A proton therapy facility with two 360° gantry treatment rooms and one fixed beamline is under development in the Huazhong University of Science and Technology, which is based on the isochronous superconducting cyclotron scheme. This paper presents the beam optics and main magnetic elements including dipoles, quadrupoles, and fast scanning magnets of the gantry beamline. In addition, the energy selection system will be introduced, which enables fast energy modulation of proton beam between 70 and 240 MeV.