This paper investigates the reliability and security performance of the downlink non-orthogonal multiple access (NOMA) networks over Nakagami-m fading channels, where the base station (BS) aims to communicate with multi-antenna NOMA users in the presence of a multi-antenna eavesdropper. To be more practical, a detrimental factor at both transmitter and receiver is considered, namely in-phase and quadrature-phase imbalance (IQI). To further improve the reliability and security of the considered networks, the selection combining (SC) algorithm at the receiver is taken into account. More specifically, the exact analytical expressions for the outage probability (OP) and the intercept probability (IP) are derived in closed-form. To obtain a better understanding of the influence for the IQI parameters on the system performance, the asymptotic behaviors for the outage probabilities (OPs) in the high signal-to-noise ratio (SNR) region are analyzed. Based on the asymptotic results, the diversity order of the considered system are obtained and discussed. The numerical results are presented to verify the validity of the theoretical analysis.

In this article, the adaptive neuro-fuzzy inference system (ANFIS) and multiconfiguration gas-turbines are used to predict the optimal gas-turbine operating parameters. The principle formulations of gas-turbine configurations with various operating conditions are introduced in detail. The effects of different parameters have been analyzed to select the optimum gas-turbine configuration. The adopted ANFIS model has five inputs, namely, isentropic turbine efficiency (Teff), isentropic compressor efficiency (Ceff), ambient temperature (T1), pressure ratio (rp), and turbine inlet temperature (TIT), as well as three outputs, fuel consumption, power output, and thermal efficiency. Both actual reported information, from Baiji Gas-Turbines of Iraq, and simulated data were utilized with the ANFIS model. The results show that, at an isentropic compressor efficiency of 100% and turbine inlet temperature of 1900 K, the peak thermal efficiency amounts to 63% and 375 MW of power resulted, which was the peak value of the power output. Furthermore, at an isentropic compressor efficiency of 100% and a pressure ratio of 30, a peak specific fuel consumption amount of 0.033 kg/kWh was obtained. The predicted results reveal that the proposed model determines the operating conditions that strongly influence the performance of the gas-turbine. In addition, the predicted results of the simulated regenerative gas-turbine (RGT) and ANFIS model were satisfactory compared to that of the foregoing Baiji Gas-Turbines.

Component corrosion is one of the potential safety hazards in transmission lines in mining areas. In order to solve the problem of poor detection accuracy caused by the large proportion of small targets and complex background in the current distant view corrosion inspection task by UAV, we propose a PWR-YOLOV5 detection method for corrosion components based on the YOLOV5 algorithm. Firstly, a new feature fusion network, WA-PANet, is reconstructed on the basis of the path aggregation network (PANet) to make full use of the features at different stages and advance the detection accuracy of small targets in distant view by deepening the process of feature fusion and introducing the skip layer connections and adaptive feature fusion factors. Secondly, the pyramid split attention (PSA) module is introduced into the deep layers of the network to highlight the feature expression of corrosion targets and enhance the ability to detect pixel-level objects. Then, we construct a receptive feature enhancement network (RFENet), which can heighten the feature fusion effect of the WA-PANet and alleviate the problem of the feature expression ability weakening due to the fusion of different receptive field features. Finally, the EIoU Loss is adopted to optimize the loss function and improve the positioning accuracy of the bounding box. The experimental results show that the mAP of the PWR-YOLOV5 algorithm can reach up to 95.37, which is 5.22 higher than YOLOV5, and the detection speed is 64.9FPS. Compared with the algorithms such as YOLOV4, Faster R-CNN, and YOLOX, the improved algorithm has better overall detection performance for the corrosion components of transmission lines in the mining area.