Ceramic-based nanofiber materials have attracted attention due to their high-temperature resistance, oxidation resistance, chemical stability, and excellent mechanical performance, such as flexibility, tensile, and compression, which endow them with promising application prospects for filtration, water treatment, sound insulation, thermal insulation, etc. According to the above advantages, we, therefore, reviewed the ceramic-based nanofiber materials from the perspectives of components, microstructure, and applications to provide a systematical introduction to ceramic-based nanofiber materials as so-called blankets or aerogels, as well as their applications for thermal insulation, catalysis, and water treatment. We hope that this review will provide some necessary suggestions for further research on ceramic-based nanomaterials.

Herein, ZnO nanoparticles (NPs) were synthesized using zinc acetate and an amino hyperbranched polymer. The methods of transmission electron microscope (TEM) and X-ray Diffraction (XRD) were applied to the characterization of ZnO NPs. Polypropylene (PP)/ZnO fiber was prepared using 1–5 wt% ZnO NPs via melt spinning. The ultraviolet light (UV)-degradation behavior, antibacterial activity and mechanical properties of PP fibers were characterized. The PP fiber filled with ZnO NPs presents better mechanical properties and the resistance to UV light degradation. For the best effect, the contents of ZnO NPs were set 4 wt% in PP fiber. FTIR analysis shows significant photo-degradation of PP induced by UV irradiation and a remarkable reduction in the UV degradation of the fiber filled with ZnO NPs. It is also observed that the ZnO NPs-filled fiber has good antibacterial actives against Escherichia coli and staphylococcus aureus.

As an important inorganic material, alumina ceramic nanofibers have attracted more and more attention because of their excellent thermal stability, high melting point, low thermal conductivity, and good chemical stability. In this paper, the preparation conditions for alumina spinning gel, such as the experimental raw materials, spin finish aid, aging time, and so on, are briefly introduced. Then, various methods for preparing the alumina ceramic nanofibers are described, such as electrospinning, solution blow spinning, centrifugal spinning, and some other preparation processes. In addition, the application of alumina ceramic nanofibers in thermal insulation, high-temperature filtration, catalysis, energy storage, water restoration, sound absorption, bioengineering, and other fields are described. The wide application prospect of alumina ceramic nanofibers highlights its potential as an advanced functional material with various applications. This paper aims to provide readers with valuable insights into the design of alumina ceramic nanofibers and to explore their potential applications, contributing to the advancement of various technologies in the fields of energy, environment, and materials science.

In this study, a facile and effective method is adopted to prepare mechanochemically robust super antifouling membrane surfaces. During the process, vinyl trimethoxy silane (VTMS) was used as the reactive intermediate for coupling the hydrophilic inorganic SiO₂ nanoparticle layer on to the organic ultra-high-molecular-weight polyethylene (UHMWPE) membrane surface, which created hierarchical nanostructures and lower surface energy simultaneously. The physical and chemical properties of the modified UHMWPE composite membrane surface were investigated. FTIR and XPS showed the successful chemical grafting of VTMS and SiO₂ immobilization, and this modification could effectively enhance the membrane’s surface hydrophilicity and filtration property with obviously decreased surface contact angle, the pure water flux and bovine serum albumin (BSA) rejection were 805 L·m⁻²·h⁻¹ and 93%, respectively. The construction of the hydrophilic nano-SiO₂ layer on the composite membrane surface for the improvement of membrane antifouling performance was universal, water flux recovery ratio values of BSA, humic acid (HA), and sodium alginate (SA) were all up to 90%. The aim of this paper is to provide an effective approach for the enhancement of membrane antifouling performance by the construction of a hydrophilic inorganic layer on an organic membrane surface.

To improve the bone regeneration ability of pure polymer, varieties of bioactive components were incorporated to a biomolecular scaffold with different structures. In this study, polysilsesquioxane (POSS), pearl powder and dexamethasone loaded porous carbon nanofibers (DEX@PCNFs) were incorporated into polylactic (PLA) nanofibrous scaffold via electrospinning for the application of bone tissue regeneration. The morphology observation showed that the nanofibers were well formed through electrospinning process. The mineralization test of incubation in simulated body fluid (SBF) revealed that POSS incorporated scaffold obtained faster hydroxyapatite depositing ability than pristine PLA nanofibers. Importantly, benefitting from the bioactive components of pearl powder like bone morphogenetic protein (BMP), bone mesenchymal stem cells (BMSCs) cultured on the composite scaffold presented higher proliferation rate. In addition, by further incorporating with DEX@PCNFs, the alkaline phosphatase (ALP) level and calcium deposition were a little higher based on pearl powder. Consequently, the novel POSS, pearl powder and DEX@PCNFs multi-incorporated PLA nanofibrous scaffold can provide better ability to enhance the biocompatibility and accelerate osteogenic differentiation of BMSCs, which has potential applications in bone tissue regeneration.