We investigated the reaction mechanism of a metal-unloaded zeolite-plasma hybrid system for decomposition of toluene at room temperature. Short-lived radicals and fast electrons did not contribute substantially to the reaction mechanism of toluene decomposition in the zeolite-plasma hybrid system. The main factor enhancing the reaction mechanism was gas-phase O3 directly reacting with toluene adsorbed onto the zeolite (the Eley-Rideal mechanism). CO2 selectivity was not improved by using H-Y zeolite due to its low ability to retain the active oxygen species formed by O3. The gas-phase O3 reacted with adsorbed toluene to form a ring cleavage intermediate that was slowly converted into formic acid. The decomposition rate of formic acid was much lower than that of toluene on the H-Y surface.
18 March 2009 in The Journal of Physical Chemistry C
Current research on the photocatalytic activity of TiO2 mainly focuses on its nano- or micro-particle forms, which are difficult to recycle and apply in real engineering applications. This study aims to apply a small pilot of TiO2 in the ceramic form to remove carbamazepine (CBZ) from an aqueous solution under simulated sunlight. A high removal efficiency up to >99% was shown in a 5 mg L−1 CBZ solution after 6 h of irradiation with a total energy of 150.92 kJ. The kinetic degradation was not affected in an alkaline solution (at pH 7, pH 10, and pH 13) but was faster under acidic conditions (pH 2) in which CBZ existed in the protonated form. The presence of NO3− (10–50 mg L−1) slightly affected the photodegradation of CBZ while humic acid significantly reduced the photocatalytic activity. In addition, the presence of major ions in water also had a negative effect at concentrations between 10 and 50 mg L−1. The MS/MS was used to identify the transformation products of CBZ, and a possible degradation mechanism was proposed. The toxicity of CBZ and the by-products was primarily evaluated. The results showed that TiO2 ceramics show high reusability and stability with a photocatalytic performance of >95% and a mass loss of <5% after 90 degradation cycles.