Marco Simone

Dr. Marco Simone

University of Cagliari
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 April 2021 in IEEE Access
Verified
Journal Article
Open access
LCLuisanna Cocco
Luisanna Cocco
Katiuscia MannaroKatiuscia Mannaro
Katiuscia Mannaro
RTRoberto Tonelli
Roberto Tonelli
LMLorena Mariani
Lorena Mariani
Matteo Bruno LodiMatteo Bruno Lodi
Matteo Bruno Lodi
AFAlessandro Fanti
Alessandro Fanti
In this paper we present a blockchain based system for the supply chain management of a particular Italian bread. Goal of the system is to guarantee a transparent and auditable traceability of the Carasau bread where each actor of the supply chain can verify the quality of the products and the conformity to the normative about the hygienic-sanitary conditions along the chain. To realize this system we relied on the Blockchain and the Internet of Thing technologies in order to provide a trustless environment, in which trust is placed in cryptography, in mathematical operations and on the network, and not in public or private companies. Thanks to the use of digital technologies the system aims to reduce the data entry errors and the risk of tampering. Our system is designed so that along the supply chain, the nodes equipped with several sensors directly communicate their data to Raspberry Pi units that elaborate and transmit them to Interplanetary File System and to the Ethereum Blockchain. Furthermore, we designed ad hoc Radio Frequency Identification and Near Field communication tags to shortly supply the proposed system with information about the products and batches. The dedicated RFID tags robustness during on-bread operation was numerically tested. The system will easily allow end consumers to have a transparent view on the whole journey from raw material to purchased final product and a supervisory authority to perform online inspections on the products' quality and on the good working practices.

13 December 2019 in Electronics
Verified
Journal Article
Open access
PDF file
MBMatteo Baire
Matteo Baire
AMAndrea Melis
Andrea Melis
Matteo Bruno LodiMatteo Bruno Lodi
Matteo Bruno Lodi
PTPierluigi Tuveri
Pierluigi Tuveri
CDChiara Dachena
Chiara Dachena
GMGiuseppe Mazzarella
Giuseppe Mazzarella
This work copes with the design and implementation of a wireless sensors network architecture to automatically and continuously monitor, for the first time, the manufacturing process of Sardinian Carasau bread. The case of a traditional bakery company facing the challenge of the Food-Industry 4.0 competitiveness is investigated. The process was analyzed to identify the most relevant variables to be monitored during the product manufacturing. Then, a heterogeneous, multi-tier wireless sensors network was designed and realized to allow the real-time control and the data collection during the critical steps of dough production, sheeting, cutting and leavening. Commercial on-the-shelf and cost-effective integrated electronics were employed, making the proposed approach of interest for many practical cases. Finally, a user-friendly interface was provided to enhance the understanding, control and to favor the process monitoring. With the wireless senors network (WSN) we designed, it is possible to monitor environmental parameters (temperature, relative humidity, gas concentrations); cinematic quantities of the belts; and, through a dedicated image processing system, the morphological characteristics of the bread before the baking. The functioning of the WSN was demonstrated and a statistical analysis was performed on the variables monitored during different seasons.

16 November 2022 in IEEE Open Journal of Antennas and Propagation
Verified
Journal Article
Open access
Giacomo MuntoniGiacomo Muntoni
Giacomo Muntoni
GMGiorgio Montisci
Giorgio Montisci
AMAndrea Melis
Andrea Melis
Matteo Bruno LodiMatteo Bruno Lodi
Matteo Bruno Lodi
Nicola CurreliNicola Curreli
Nicola Curreli
GMGiuseppe Mazzarella
Giuseppe Mazzarella
The new space economy paradigm demands for cost-effective systems for its development. Plastic CubeSats are appealing candidates. To enable the use of this new generation of space systems, the challenge of designing suitable communication sub-systems must be faced. In this work, a 3D-printed ABS antenna easily embeddable in a plastic CubeSat is proposed. The 3D-printed material has been characterized in terms of dielectric, mechanical and thermal properties, and the compliance with space requirements has been assessed. In particular, thermogravimetric and calorimetric tests have been carried out. Static and dynamic mechanical analysis were performed. To comply with the stringent weight and space requirements, the unique antenna design of a curved stacked patch has been proposed. The patch covers the uplink (2.025–2.11 GHz) and downlink (2.2–2.29 GHz) bands for Telemetry Tracking and Command (TT&C) applications, with an overall bandwidth of about 300 MHz (14%). Additionally, taking advantage of the curved shape, the proposed antenna shows a size reduction of the resonant length of about 34%. The size of the antenna is 71.5 x 71.5 × 13 mm3 and is characterized by a weight of only 51 g. Also, in silico tests, by relying on the measured physical properties and a non-linear numerical model, have been carried out to assess the performances of the final antenna layout during a typical CubeSat mission. The proposed design strategy could be used to develop plastic CubeSats embedding performing antennas.

21 September 2018 in Energies
Verified
Journal Article
Open access
PDF file
Emilio GhianiEmilio Ghiani
Emilio Ghiani
Alessandro SerpiAlessandro Serpi
Alessandro Serpi
Virginia PilloniVirginia Pilloni
Virginia Pilloni
GSGiuliana Sias
Giuliana Sias
MSMarco Simone
Marco Simone
Paolo Attilio PegoraroPaolo Attilio Pegoraro
Paolo Attilio Pegoraro
Electric power systems are experiencing relevant changes involving the growing penetration of distributed generation and energy storage systems, the introduction of electric vehicles, the management of responsive loads, the proposals for new energy markets and so on. Such an evolution is pushing a paradigm shift that is one of the most important challenges in power network design: the management must move from traditional planning and manual intervention to full “smartization” of medium and low voltage networks. Peculiarities and criticalities of future power distribution networks originate from the complexity of the system which includes both the physical aspects of electric networks and the cyber aspects, like data elaboration, feature extraction, communication, supervision and control; only fully integrated advanced monitoring systems can foster this transition towards network automation. The design and development of such future networks require distinct kinds of expertise in the industrial and information engineering fields. In this context, this paper provides a comprehensive review of current challenges and multidisciplinary interactions in the development of smart distribution networks. The aim of this paper is to discuss, in an integrated and organized manner, the state of the art while focusing on the need for interaction between different disciplines and highlighting how innovative and future-proof outcomes of both research and practice can only emerge from a coordinated design of all the layers in the smart distribution network architecture.

24 February 2018 in Electronics
Verified
Journal Article
Open access
PDF file
MSMarco Simone
Marco Simone
AFAlessandro Fanti
Alessandro Fanti
GVGiuseppe Valente
Giuseppe Valente
GMGiorgio Montisci
Giorgio Montisci
RGRiccardo Ghiani
Riccardo Ghiani
GMGiuseppe Mazzarella
Giuseppe Mazzarella
A microstrip-to-waveguide transition has been realized for radio astronomy applications, designed to operate in the Q-band (33–50 GHz). As part of an array radio frequency (RF) receiver, the main requirement of such a transition is the reduction of transverse space occupation for the integration in the entire receiver chain, so an in-line configuration has been developed. Moreover, the high frequency band implies that an easy fabrication is a critical requirement if a good match between the two guiding structures is to be obtained in the desired band (with a relative bandwidth of 40%). The combination of CAD software and an optimization tool allows the device to achieve a good return loss over the entire band.

27 September 2021 in IEEE Journal on Multiscale and Multiphysics Computational Techniques
Verified
Journal Article
Open access
MSMarco Simone
Marco Simone
Matteo Bruno LodiMatteo Bruno Lodi
Matteo Bruno Lodi
Nicola CurreliNicola Curreli
Nicola Curreli
SPSanti Concetto Pavone
Santi Concetto Pavone
GMGiuseppe Mazzarella
Giuseppe Mazzarella
AFAlessandro Fanti
Alessandro Fanti
Nowadays, the use of CubeSats for telecommunications and interplanetary missions is ever-increasing, thanks to their appealing low-cost character, as well as the space environment, which poses challenging multiphysics constraints on the antenna design. In this framework, the use of Ka-band for communication is explored. We present the design of a stacked patch antenna working across the down- and uplink Ka-bands. Materials and geometry of the radiator have been selected by accounting for the trade-off between electromagnetic, thermal and mechanical requirements. The design of the antenna is performed with a particle swarm optimization algorithm developed to control the bandwidth and matching. A bandwidth of 5.53@33.185 GHz has been obtained, with a gain around 8 dB. Furthermore, a multiphysics thermal analysis is performed to verify the operational stability of the optimized array, mounted on a 1 U satellite, in a case-study mission. The temperature patterns in the array are evaluated during the orbital period, and the influence of the operative temperature on the antenna responses and gain was considered. We found that the thermal loads can affect the antenna matching. However, thanks to the optimized design, the proposed stacked antenna can operate from −100 $^{\circ }$ C to 100 $^{\circ }$ C, with an almost constant gain. Finally, following a damage-tolerant approach, the level of mechanical deformation, which could be induced on the communication system, was studied. The stress analysis reveals that the stacked geometry can be used in a space mission. From the investigation of the strain and displacement field, we found a negligible impact on the antenna performance.