Water table fluctuations affect the recoverability of light non-aqueous phase liquid (LNAPL) petroleum hydrocarbons. LNAPL transmissivity (Tn) is being applied as an improved metric for LNAPL recoverability. In this paper, the applicability of Tn as a lagging and leading metric in unconsolidated aquifers under variable water table conditions was investigated. Tn values obtained through baildown testing and recovery data-based methods (skimming) were compared in three areas of a heterogeneous gasoline contaminated site in Western Australia. High-resolution characterisation methods were applied to account for differences in the stratigraphic profile and LNAPL distribution. The results showed a range of Tn from 0 m2/day to 2.13 m2/day, exhibiting a strong spatial and temporal variability. Additionally, observations indicated that Tn reductions may be more affected by the potentiometric surface elevation (Zaw) than by the application of mass recovery technologies. These observations reflected limitations of Tn as a lagging metric and a Remedial Endpoint. On the other hand, the consistency and accuracy of Tn as a leading metric was affected by the subsurface conditions. For instance, the area with a larger vertical LNAPL distribution and higher LNAPL saturations found Tn to be less sensitive to changes in Zaw than the other two areas during the skimming trials. Tn values from baildown and skimming tests were generally in a close agreement (less than a factor of 2 difference), although higher discrepancies (by a factor up to 7.3) were found, probably linked to a preferential migration pathway and Zaw. Under stable Zaw, Tn was found to be a relatively reliable metric. However, variable water table conditions affected Tn and caution should be exercised in such scenarios. Consequently, remediation practitioners, researchers and regulators should account for the nexus between Tn, LNAPL distribution, geological setting and temporal effects for a more efficient and sustainable management of complex contaminated sites.
This introductory chapter provides an overview of some challenges encountered during assessment and remediation of sites contaminated by petroleum hydrocarbons (PHCs), especially due to the presence of petroleum non-aqueous phase liquid (NAPL). PHC contamination of soil and groundwater has become recognized globally as an environmental concern. NAPL releases may go unnoticed for years and can be costly, time-consuming, and challenging to cleanup. Environmental investigations are required to assess the subsurface conditions, and, when necessary, appropriate remedial strategies are implemented. Remediation success depends on the development of a living conceptual site model, evaluation, and selection of potential treatment technologies followed by technology implementation and performance monitoring. This chapter outlines various challenges commonly found at PHC-contaminated sites associated to regulatory issues, multiphase flow mechanics, NAPL partitioning and biodegradation, and hydrogeological controls.
Knowledge of subsurface light nonaqueous phase liquid (LNAPL) saturation is important for developing a conceptual model and a plan for addressing LNAPL contaminated sites. Investigators commonly predict LNAPL mobility and potential recoverability using information such as LNAPL physical properties, subsurface characteristics, and LNAPL saturations. Several models exist that estimate the LNAPL specific volume and transmissivity from fluid levels in monitoring wells. Commonly, investigators use main drainage capillary pressure–saturation relations because they are more frequently measured and available in the literature. However, main drainage capillary pressure–saturation relations may not reflect field conditions due to capillary pressure–saturation hysteresis. In this paper, we conduct a preliminary test of a recent analytical model that predicts subsurface LNAPL saturations, specific volume, and transmissivity against data measured at a LNAPL contaminated site. We call our test preliminary because we compare only measured and predicted vertical LNAPL saturations at a single site. Our results show there is better agreement between measured and predicted LNAPL saturations when imbibition capillary pressure–saturation relations are employed versus main drainage capillary pressure–saturation relations. Although further testing of the model for different conditions and sites is warranted, the preliminary test of the model was positive when consideration was given to capillary pressure–saturation hysteresis, which suggests the model can yield reasonable predictions that can help develop and update conceptual site models for addressing subsurface LNAPL contamination. Parameters describing capillary pressure–saturation relations need to reflect conditions existing at the time when the fluid levels in a well are measured.
An overview of the historical development of k-S-P relations (constitutive relations) to model potential flow of light nonaqueous phase liquids (LNAPLs) in the subsurface is presented in this chapter. The focus is advancements proposed by Parker, Lenhard, and colleagues over time. Discussion includes constitutive relations for incorporation in numerical multiphase flow models as well as constitutive relations for predicting subsurface LNAPL volumes and transmissivities from fluid levels measured in monitoring groundwater wells. LNAPL saturation distributions are given for various subsurface properties and layering sequences.