This review discusses the main methods for producing spherical powder particles of corrosion-resistant steels as a material widely used in all industries. Also the examples of products made by modern additive methods are described. Currently, spherical powder particles of corrosion-resistant steels are used in the following additive methods: selective laser melting, selective laser sintering, direct laser sintering, and electron beam melting. Each of these methods has its own requirements for the characteristics of spherical powder particles of corrosion-resistant steels. The review provides a brief description of the principles of operation of each method and the requirements for spherical powder particles of corrosion-resistant steels. It also considers a detailed description of each method of additive manufacturing with a description of the principle of operation and specific examples of obtaining spherical particles of corrosion-resistant steel powders with indication of their properties (morphology, structural features, chemical composition, fluidity, bulk density). A comparative analysis was carried out with a description of disadvantages and advantages of each method. Examples of the use of spherical particles of corrosion-resistant steel powders for the manufacture of products by various additive methods (including post-processing) are given with description of the final products characteristics. Based on the data presented, a conclusion was made about the preferred methods for obtaining spherical particles of corrosion-resistant steel powders for specific additive methods used in modern industry. The review considers the following methods for producing spherical powder particles: water atomization (atomization of liquid metal with a jet of water under pressure); gas atomization (atomization of the melt with a jet of inert gas (argon or nitrogen) under pressure); centrifugal atomization (atomization of molten metal with a high-speed rotating disc); ultrasonic atomization (atomization of liquid metal by ultrasound); non-contact atomization (atomization of liquid metal with a powerful pulse of electric current); plasma wire spraying; plasma spraying of a rotating electrode; plasma spheroidization.

The experimental results on rewetting of the surface of a superheated vertical copper heater and a heater with a structured capillary-porous coating (applied by means of directed plasma spraying) by...

The process of heat transfer at pool boiling of liquid (Freon R21) on tubes with three-dimensional plasma-deposited capillary-porous coatings of various thicknesses has been experimentally studied. Comparative analysis of experimental data showed that the heat transfer coefficient for a heater tube with a 500-μm-thick porous coating is more than twice as large as that in liquid boiling on an otherwise similar uncoated tube. At the same time, no intensification of heat exchange in the regime of bubble boiling is observed on a tube with a 100-μm-thick porous coating.