Rock slopes with weak intercalated layers could experience disturbance from various deep mining activities; however, their dynamic stability has not been thoroughly investigated. In this paper, the dynamic response characteristics and failure mechanism of the coal slopes with weak intercalated layers under blasting loads were studied by means of numerical analysis, shaking table tests, and field tests. The effects of dynamic loads with different frequencies on the dynamic response of the slope were analyzed, and the natural frequency of the slope was also determined. The results show that the dynamic amplification effect of the slope is smaller than that of the homogeneous slope, and weak layers weaken the wave propagation in the rock mass. Both experimental and field investigation results show that the slope’s natural frequency was approximately 35 Hz. The slope deformation decreased with the distance of the blasting source. Cracks appear along the weak interlayer firstly under the action of horizontal vibration; then, longitudinal cracks occur at the slope crest. With the increase of dynamic loads, cracks continue expanding, deepening, and penetrating in the main controlled weak interlayer; then, the sliding body presents tensile shear failure along the sliding surface. This study could provide insights into the understanding of the coal slope instability and failure mechanism; this could benefit the blasting operation of the coal slope in fields.
In this study, Setaria viridis was selected as the research object, the soil reinforcement mode of roots was analyzed, and the general mechanical model of soil reinforcement was proposed. The direct shear tests of root–soil composite and root tensile tests were carried out, and the relationship between the root additional cohesion and root depth was studied. Furthermore, numerical simulations were established to explore the variation law of shallow displacement and slope stability as a function of the root ratio. The results show that the effect of herbaceous plant roots on the soil was composed of material modification and root binding force on the soil. The shear strength improvement of the root–soil composite was mainly reflected by the increase in cohesion. Furthermore, the composite cohesion was positively correlated with the root content but negatively correlated with the water content. With the increase in root diameter, the tensile strength of the Setaria viridis root increased linearly, but its tensile strength decreased and showed a power relation. The greater the total cohesion of the root–soil composite layer, the smaller the total displacement and the higher the slope stability. Thus, the slope’s herbaceous vegetation could effectively control the deformation and slip of the shallow soil, which has good application value for reducing soil erosion in mining areas.
To investigate the seismic response of layered rock sites, a multidomain analysis method was proposed. Three finite element models with infinite element boundaries for layered sites were analysed. The results of this multidomain analysis show that stratum properties and elevation have an impact on wave propagation characteristics and the dynamic response of layered sites. Compared with the rock mass, the overlying gravel soil has a greater dynamic amplification effect at the sites. A time domain analysis parameter PGA(IMF) was proposed to analyse the effects of different strata on the seismic magnification effect of layered sites, and its application was also discussed in comparison with PGA. According to the frequency domain analysis, the interface of the rock mass strata has a low impact on the Fourier spectrum characteristics of the sites, but gravel soil has a great magnification effect on the spectrum amplitude in the high-frequency band (≥30 Hz) of waves. Moreover, the stratum properties have a great influence on the shape and peak value of the Hilbert energy and marginal spectrum at layered sites. When waves propagate from hard rock to soft rock, the peak value of the Hilbert energy spectrum changes from single to multiple peaks; then, in gravelly soil, the Hilbert energy spectral peak, its nearby amplitude and the amplitude in the high-frequency band (28–36 Hz) are obviously amplified. The frequency components and amplitude of the marginal spectrum become more abundant and larger from rock to gravelly soil in the high-frequency band (28–35 Hz).
Reasonable production capacity is related to the economic benefits of an open-pit coal mine. This study analyzes the relationship between the working face length, the annual advancing speed and the production capacity. It constructs a production capacity function relationship model. Take the Baorixile open-pit coal mine as an example. The remaining unmined parts are divided into four regions, and the range of production capacity in each region is analyzed by the established model and the determined respectively. On this basis, three mining district division plans are proposed. By analyzing and comparing the stripping ratio, mining life of the district, fault influence, difficulty of transition connection in the mining districts, the convenience of transportation system layout and other indexes of each plan, Plan 3 is determined to be the optimal plan. The production capacity planning results of each mining district in this plan are as follows: the production capacity of the 3rd mining district is 30–35 Mt/a; the production capacity of the 4th mining district in Region 1 is 20–31 Mt/a, and the production capacity in Region 2 is 24–33 Mt/a; the production capacity of the 5th mining district is 20–27 Mt/a.
Combining the requirements for refined modeling and dynamic update of fault slope geological models in open-pit coal mines, we systematically elaborated on the elements and rules of slope 3D geological modeling and proposed a fine modeling and dynamic updating method based on digital elevation model (DEM) and half-edge boundary representation (B-Rep) data structures. Initially, the stratigraphic division of the study area is conducted based on borehole and section data, combined with the geological evolution history and the level set theory. Applying inverse distance weighting (IDW) for estimation, the geological interface triangular irregular network (TIN) is constructed using the TIN algorithm. Secondly, fine reconstruction of fault surfaces through Morphing transformation improves the accuracy and smoothness of fault surface shape reconstruction under sparse data conditions. Then, the intersection-cutting processing method of fault-fault and fault-stratum for slope geological ground state model modeling under complex fault segmentation is investigated. Finally, constructing 3D geological models of fault slopes and the integrated correction of surface and subsurface are realized through dynamic updating methods for 3D surfaces and strata. Taking the 3D geological modeling of a fault slope of an open-pit coal mine in China as an example, the feasibility of the technical method is verified.