Fabian Schoden

Dr. Fabian Schoden

Institute for Technical Energy Systems (ITES)
+2
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 August 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
Fabian SchodenFabian Schoden
Fabian Schoden
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
In times of climate change and increasing resource scarcity, the importance of sustainable renewable energy technologies is increasing. However, the photovoltaic (PV) industry is characterised by linear economy structures, energy-intensive production, downcycling and little sustainability. One starting point for sustainable technologies is offered by the circular economy with its circular design principles. One problematic aspect of the design of crystalline PV modules is the encapsulation. In particular, the encapsulation avoids high-value recycling or the remanufacturing of modules, which could close loops and extend the lifetime of the products. For this reason, this paper provides an overview of the current state of encapsulation methods regarding production, materials and recycling. In addition, the current state of sustainability research in the photovoltaic sector is presented using the VOSviewer tool. Furthermore, alternative encapsulation technologies are discussed and compared in terms of performance and sustainability. The current encapsulation method using ethylene vinyl acetate as the encapsulation material offers major disadvantages in terms of performance and recyclability. Alternatives are the thermoplastic material polyolefin and the alternative structure of the NICE technology. Overall, however, research should focus more on sustainability and recyclability. Alternative module structures will be a decisive factor in this context.

22 June 2021 in Energies
Verified
Journal Article
Open access
PDF file
Fabian SchodenFabian Schoden
Fabian Schoden
MDMarius Dotter
Marius Dotter
DKDörthe Knefelkamp
Dörthe Knefelkamp
Tomasz BLACHOWICZTomasz BLACHOWICZ
Tomasz BLACHOWICZ
EHEva Schwenzfeier Hellkamp
Eva Schwenzfeier Hellkamp
In times of climate change and dwindling fossil resources, the need for sustainable renewable energy technologies gains importance, increasingly fast. However, the state of the art technologies are energy intensive in their production, like monocrystalline photovoltaic, or even consist of not recyclable composite material, in the case of wind turbine blades. Despite a lack in efficiency and stability, dye sensitized solar cells (DSSC) have a high potential to supplement the state of the art green energy technology in future. With low production costs and no necessity for toxic compounds DSSCs are a potential product, which could circulate in the loops of a circular economy. Therefore, with this paper, we provide the status of research on DSSC recycling and an outlook on how recycling streams could be realized in the future for glass-based DSSCs without toxic components. The overview includes work on using recycled material to build DSSCs and extending the life of a DSSC, e.g., through rehydration. We also illustrate the state of sustainability research for DSSCs using the VOSviewer tool. To date, the term sustainability appears in 35 of 24,441 publications on DSSCs. In view of the global challenges, sustainability should be researched more seriously because it is as important as the efficiency and stability of DSSCs.

17 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Fabian SchodenFabian Schoden
Fabian Schoden
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
Tomasz BLACHOWICZTomasz BLACHOWICZ
Tomasz BLACHOWICZ
HMHildegard Manz-Schumacher
Hildegard Manz-Schumacher
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
In a world with growing demand for resources and a worsening climate crisis, it is imperative to research and put into practice more sustainable and regenerative products and processes. Especially in the energy sector, more sustainable systems that are recyclable, repairable and remanufacturable are needed. One promising technology is dye-sensitized solar cells (DSSCs). They can be manufactured with low energy input and can be made from non-toxic components. More than 70% of the environmental impact of a product is already determined in the design phase of a product, which is why it is essential to implement repair, remanufacturing and recycling concepts into the product design. In this publication, we explore appropriate design principles and business models that can be applied to DSSC technology. To realize this, we applied the concept of Circo Track, a method developed by the Technical University of Delft, to DSSCs and investigated which design concepts and business models are applicable. This method enables companies to transform a product that is disposed of after its useful life into one that can be used for longer and circulates in material cycles. The most important result is the description of a performance-based business model in which DSSCs are integrated into the customer’s building and green energy is provided as a service. During the operational phase, data is collected for product improvement and maintenance, and repair is executed when necessary. When the contract expires, it can be renewed, otherwise the modules are dismantled, reused, remanufactured or recycled.

7 May 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Fabian SchodenFabian Schoden
Fabian Schoden
JDJoscha Detzmeier
Joscha Detzmeier
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
Tomasz BLACHOWICZTomasz BLACHOWICZ
Tomasz BLACHOWICZ
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
Resources are becoming more expensive and less accessible, for instance construction wood or semiconductors. In addition, climate change requires the conversion of the energy system to 100% renewable energy. Therefore, we need resources to prevent the climate crisis from worsening, but at the same time, we are suffering from a worsening resource crisis. State-of-the-art technologies, such as silicon-based photovoltaic or wind power plants, are harnessing renewable energy but causing problems and resource losses at the end of their useful life. This alarming situation must be addressed with renewable energy technologies that can be used longer, repaired and remanufactured, and properly recycled at the end of their useful life. An emerging technology that can complement the established systems is dye-sensitized solar cells (DSSCs). Their production is less energy intensive and they can be manufactured without toxic materials. In line with the concept of the circular economy, the service life of all products must be improved in order to reduce resource consumption. Therefore, we investigated the potential for remanufacturing DSSCs by taking apart old DSSCs, cleaning the components, and building new DSSCs from the remanufactured components. The remanufactured DSSCs have the same or higher efficiencies and can be remanufactured multiple times.

21 December 2019 in Sustainability
Verified
Journal Article
Open access
PDF file
Fabian SchodenFabian Schoden
Fabian Schoden
ASAlina Siebert
Alina Siebert
AKAlparslan Keskin
Alparslan Keskin
KHKonstantin Herzig
Konstantin Herzig
MSMajkel Straus
Majkel Straus
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
Putting renewable energy to good use is necessary to deal with one of the greatest challenges of our time, namely, climate change. One problem, however, is that the technology we are using today turns into toxic waste at the end of its useful life, which in particular concerns the blades of wind turbines. We investigated how the ideas of a circular economy can be applied to address this issue. To this end, we built a small wind turbine almost entirely from used materials. The social purpose of this is to raise public awareness about renewable energy technology that is part of a circular economy. Therefore, we chose a reliable and easy-to-build concept for a small wind turbine, which can be reproduced in a “Do It Yourself” (DIY) approach. The core challenges we had to face consisted of how to acquire appropriate used materials and how to improve the efficiency of the system to obtain adequate electrical power. With a financial investment of less than €100, we built a Savonius wind turbine for use in, for example, a private garden to charge a power bank or other USB-chargeable devices.

3 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
Fabian SchodenFabian Schoden
Fabian Schoden
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
EDEmma Davies
Emma Davies
DDDirk Diederich
Dirk Diederich
JSJan Storck
Jan Storck
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
The effects of climate change are becoming increasingly clear, and the urgency of solving the energy and resource crisis has been recognized by politicians and society. One of the most important solutions is sustainable energy technologies. The problem with the state of the art, however, is that production is energy-intensive and non-recyclable waste remains after the useful life. For monocrystalline photovoltaics, for example, there are recycling processes for glass and aluminum, but these must rather be described as downcycling. The semiconductor material is not recycled at all. Another promising technology for sustainable energy generation is dye-sensitized solar cells (DSSCs). Although efficiency and long-term stability still need to be improved, the technology has high potential to complement the state of the art. DSSCs have comparatively low production costs and can be manufactured without toxic components. In this work, we present the world’ s first experiment to test the recycling potential of non-toxic glass-based DSSCs in a melting test. The glass constituents were analyzed by optical emission spectrometry with inductively coupled plasma (ICP-OES), and the surface was examined by scanning electron microscopy energy dispersive X-ray (SEM-EDX). The glass was melted in a furnace and compared to a standard glass recycling process. The results show that the described DSSCs are suitable for glass recycling and thus can potentially circulate in a circular economy without a downcycling process. However, material properties such as chemical resistance, transparency or viscosity are not investigated in this work and need further research.