Anna Katharina Schnatmann

Ms. Anna Katharina Schnatmann

Bielefeld University of Applied Sciences, Faculty of Engineering and Mathematics
+1

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 August 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
Fabian SchodenFabian Schoden
Fabian Schoden
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
In times of climate change and increasing resource scarcity, the importance of sustainable renewable energy technologies is increasing. However, the photovoltaic (PV) industry is characterised by linear economy structures, energy-intensive production, downcycling and little sustainability. One starting point for sustainable technologies is offered by the circular economy with its circular design principles. One problematic aspect of the design of crystalline PV modules is the encapsulation. In particular, the encapsulation avoids high-value recycling or the remanufacturing of modules, which could close loops and extend the lifetime of the products. For this reason, this paper provides an overview of the current state of encapsulation methods regarding production, materials and recycling. In addition, the current state of sustainability research in the photovoltaic sector is presented using the VOSviewer tool. Furthermore, alternative encapsulation technologies are discussed and compared in terms of performance and sustainability. The current encapsulation method using ethylene vinyl acetate as the encapsulation material offers major disadvantages in terms of performance and recyclability. Alternatives are the thermoplastic material polyolefin and the alternative structure of the NICE technology. Overall, however, research should focus more on sustainability and recyclability. Alternative module structures will be a decisive factor in this context.

17 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Fabian SchodenFabian Schoden
Fabian Schoden
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
Tomasz BLACHOWICZTomasz BLACHOWICZ
Tomasz BLACHOWICZ
HMHildegard Manz-Schumacher
Hildegard Manz-Schumacher
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
In a world with growing demand for resources and a worsening climate crisis, it is imperative to research and put into practice more sustainable and regenerative products and processes. Especially in the energy sector, more sustainable systems that are recyclable, repairable and remanufacturable are needed. One promising technology is dye-sensitized solar cells (DSSCs). They can be manufactured with low energy input and can be made from non-toxic components. More than 70% of the environmental impact of a product is already determined in the design phase of a product, which is why it is essential to implement repair, remanufacturing and recycling concepts into the product design. In this publication, we explore appropriate design principles and business models that can be applied to DSSC technology. To realize this, we applied the concept of Circo Track, a method developed by the Technical University of Delft, to DSSCs and investigated which design concepts and business models are applicable. This method enables companies to transform a product that is disposed of after its useful life into one that can be used for longer and circulates in material cycles. The most important result is the description of a performance-based business model in which DSSCs are integrated into the customer’s building and green energy is provided as a service. During the operational phase, data is collected for product improvement and maintenance, and repair is executed when necessary. When the contract expires, it can be renewed, otherwise the modules are dismantled, reused, remanufactured or recycled.

3 November 2021 in Materials
Verified
Journal Article
Open access
PDF file
Fabian SchodenFabian Schoden
Fabian Schoden
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
EDEmma Davies
Emma Davies
DDDirk Diederich
Dirk Diederich
JSJan Storck
Jan Storck
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
The effects of climate change are becoming increasingly clear, and the urgency of solving the energy and resource crisis has been recognized by politicians and society. One of the most important solutions is sustainable energy technologies. The problem with the state of the art, however, is that production is energy-intensive and non-recyclable waste remains after the useful life. For monocrystalline photovoltaics, for example, there are recycling processes for glass and aluminum, but these must rather be described as downcycling. The semiconductor material is not recycled at all. Another promising technology for sustainable energy generation is dye-sensitized solar cells (DSSCs). Although efficiency and long-term stability still need to be improved, the technology has high potential to complement the state of the art. DSSCs have comparatively low production costs and can be manufactured without toxic components. In this work, we present the world’ s first experiment to test the recycling potential of non-toxic glass-based DSSCs in a melting test. The glass constituents were analyzed by optical emission spectrometry with inductively coupled plasma (ICP-OES), and the surface was examined by scanning electron microscopy energy dispersive X-ray (SEM-EDX). The glass was melted in a furnace and compared to a standard glass recycling process. The results show that the described DSSCs are suitable for glass recycling and thus can potentially circulate in a circular economy without a downcycling process. However, material properties such as chemical resistance, transparency or viscosity are not investigated in this work and need further research.

23 January 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
TRTobi Reimers
Tobi Reimers
EHErik Hüdepohl
Erik Hüdepohl
JUJonah Umlauf
Jonah Umlauf
PKPia Kleinebekel
Pia Kleinebekel
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
Photovoltaics (PV) is a key pillar of renewable energy supply. However, the climate and resource crisis make it necessary to implement further optimizations toward a circular economy in the PV industry. One strategy for saving resources and lowering carbon dioxide emissions is the reuse of modules (second-life PV). As part of this work, various tests were carried out with crystalline modules from two different manufacturers. The modules had already been transported to a recycling company and were originally intended for recycling. The measurements carried out provide a comprehensive assessment of the condition of the PV modules. In total, five different measurement methods were used, two of which related to short-term measurements under controlled laboratory conditions and three to long-term assessments under real conditions. The investigation illustrated that modules from the recycling company have potential for reuse. However, it also showed that a clearly differentiated classification system is necessary due to module age- and environmental conditions-related degradation. Qualification and further long-term measurements should be implemented using a combination of measurement methods.

7 May 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Fabian SchodenFabian Schoden
Fabian Schoden
JDJoscha Detzmeier
Joscha Detzmeier
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
Tomasz BLACHOWICZTomasz BLACHOWICZ
Tomasz BLACHOWICZ
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
Resources are becoming more expensive and less accessible, for instance construction wood or semiconductors. In addition, climate change requires the conversion of the energy system to 100% renewable energy. Therefore, we need resources to prevent the climate crisis from worsening, but at the same time, we are suffering from a worsening resource crisis. State-of-the-art technologies, such as silicon-based photovoltaic or wind power plants, are harnessing renewable energy but causing problems and resource losses at the end of their useful life. This alarming situation must be addressed with renewable energy technologies that can be used longer, repaired and remanufactured, and properly recycled at the end of their useful life. An emerging technology that can complement the established systems is dye-sensitized solar cells (DSSCs). Their production is less energy intensive and they can be manufactured without toxic materials. In line with the concept of the circular economy, the service life of all products must be improved in order to reduce resource consumption. Therefore, we investigated the potential for remanufacturing DSSCs by taking apart old DSSCs, cleaning the components, and building new DSSCs from the remanufactured components. The remanufactured DSSCs have the same or higher efficiencies and can be remanufactured multiple times.

2 June 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
ASAnna Katharina Schnatmann
Anna Katharina Schnatmann
HWHeike Wulf
Heike Wulf
FSFabian Schoden
Fabian Schoden
ESEva Schwenzfeier-Hellkamp
Eva Schwenzfeier-Hellkamp
The development of resource-efficient products based on a comprehensive assessment of the R-principles is becoming increasingly important in the context of the Eco-Design Regulation. However, there is no basis for assessing c-Si photovoltaic modules in the context of REpair, REfurbish, and REmanufacture. The aim of this study is therefore to create an assessment basis including a definition framework and a selection of priority parts. The results are a basic functional and structural analysis, an initial catalog of criteria for a semi-quantitative assessment method, and a weighting of priority parts. It becomes clear that individual cells and connection components are particularly relevant for REpair and REfurbish. For REmanufacture, attention should be paid to the entirety of the cells, the frame, and the glass. Overall, a method is created that, in application, lays the foundation for a sustainable product design of photovoltaic modules improved for the circular economy and can be further optimized.