In this paper, a high-temperature low-cycle fatigue life prediction model, based on the total strain energy density method, was established. Considering the influence of the Masing and non-Masing behavior of materials on life prediction, a new life prediction model was obtained by modifying the existing prediction model. With an 800H alloy of the heat transfer tube of a steam generator as the research object, the high-temperature and low-cycle fatigue test was carried out at two temperatures. The results show that the predicted and experimental results are in good agreement, proving the validity of the life prediction model.
In response to the growing demand for automation in aerospace harness manufacturing, this study proposes a digital twin-based intelligent monitoring system for robotic wiring operations. The system integrates a seven-degree-of-freedom robotic platform with an adaptive servo gripper and employs a five-dimensional digital twin framework to synchronize physical and virtual entities. Key innovations include a coordinated motion model for minimizing joint displacement, a particle-swarm-optimized backpropagation neural network (PSO-BPNN) for adaptive gripping based on wire characteristics, and a virtual–physical closed-loop interaction strategy covering the entire wiring process. Methodologically, the system enables motion planning, quality prediction, and remote monitoring through Unity3D visualization, SQL-driven data processing, and real-time mapping. The experimental results demonstrate that the system can stably and efficiently complete complex wiring tasks with 1:1 trajectory reproduction. Moreover, the PSO-BPNN model significantly reduces prediction error compared to standard BPNN methods. The results confirm the system’s capability to ensure precise wire placement, enhance operational efficiency, and reduce error risks. This work offers a practical and intelligent solution for aerospace harness production and shows strong potential for extension to multi-robot collaboration and full production line scheduling.
The effects of laser heat treatment on the microstructure and properties of alloy 800H were investigated. The fracture morphology, elemental changes, and phase composition of the specimens were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffractometry (XRD). The results show that the long-lasting life of the specimen after laser heat treatment increased by 28.6%, and the elongation after fracture increased by 20.7%. The macroscopic morphology of the fracture specimen exhibited obvious ductile fracture morphology, and the changes in the elemental content and grain size significantly affected the ductility and toughness of the alloy. This study has certain guiding significance for the optimization of the heat treatment process of this type of alloy.
30 June 2017 in Journal of Measurements in Engineering
Automotive steering system is able to directly experience the road information, directly determine whether the car is in a stable state of device, good fast steering system directly determine the stand or fall of the console, so the steering force feedback also gradually become the research hot spot. This paper mainly through torque motor as the main driver of steering system components, through the central processing unit of remote feedback torque is analyzed and the driver, and then send the command control and reversing and the size of the output torque of the motor to achieve steering and correction of force feedback.
In view of the complex design of light sources and the poor illumination uniformity in cylinder block transverse hole detection by using machine vision, a double light source method is provided for the detection of transverse holes. In this method, an integrating sphere is used as the background light source and an LED is used as the direct light source. To achieve uniformity of illumination on the cylinder transverse hole, a mathematical model of the light source radiation response is established in this paper. Using this imaging method, a relationship between the size of the light source, its distance and the position of the reflection point and illumination uniformity is proposed. Finally, a controlled experiment was performed to reveal the illumination uniformity developed in different light sources: an optical fiber source, an LED source, and an LED + integrating sphere source. The results of the experiment show that the non-uniformity is up to 10% with an LED light source emitting from outside the hole, and it becomes 5% when the LED light is moved to the inside of the hole; the non-uniformity of an internal optical fiber light source is 4.6%. In particular, the double light source, wherein the integrating sphere is used as a background light outside the cylinder block and the LED is used as a direct light inside the cylinder block has a non-uniformity of 0.6%. The uniformity illumination surpasses 99%, which can be obtained by using an integrating sphere and LED dual light source, meeting our requirements for machine vision detection.
Aircraft wire-harness routing on fixture boards requires not only efficient large-workspace robot motion but also smooth and process-safe passage around densely distributed pins. Conventional robot trajectory optimization generally focuses on generic motion indices and cannot explicitly represent local over-bending risk and coupled wiring-process constraints. This paper proposes a process-safety-aware multi-objective trajectory optimization method for a seven-axis wiring robot composed of a linear rail and a six-DOF manipulator. An executable reference trajectory is parameterized using quintic B-splines, and execution time, normalized joint jerk, and a pin-neighborhood weighted bending-safety proxy are jointly optimized under robot-motion, pin-passing, board-clearance, and non-target-pin constraints. A constraint-guided adaptive DE-NSGA-II algorithm is developed to improve feasible-solution search in the resulting narrow and strongly coupled feasible region. Physical experiments show that, compared with MOPSO, the proposed method reduces normalized joint jerk by 35.8% and the bending-safety proxy by 77.0%, while completing all ten repeated trials without controller alarms. Vision-based measurements further show a strong correlation between the proposed proxy and the actual harness bending radius (). Additional routing layouts confirm the applicability of the method to more complex fixture-board configurations. These results demonstrate that the proposed method provides a practical balance among routing efficiency, trajectory smoothness, and process reliability.