The corrosion protective performance of polyaniline/palm oil (PAni-PO) blend coated on mild steel in 3% NaCl aqueous solutions has been evaluated by electrochemical methods, namely, open circuit potential (ocp), potentiodynamic polarization, and EIS spectroscopy. The surface of mild steel was covered by a dark green protective layer due to the physical interaction between the coating and steel. The permanent shifts of ocp and potentiodynamic polarization towards higher positive value of oxidation potential by about 800mV and by a decrease in corrosion current density by sixfold in magnitude and an increase of 10 orders of magnitude in charge transfer resistance are due to protective coating.
The catalyst’s photocatalytic activity under sunlight was tested using graphene oxide (GO) from plant cellulose waste and modified by ZnO nanomaterial. The absorbance of the dye’s solution (Rhodamine 6G) was recorded as λmax = 555 nm at regular time intervals. The degradation kinetics of rhodamine was evaluated by applying first-order integrated rate expression, kt = −ln (C/C0). The half-life (t1/2), the rate constant (k), and the time constant τ (Tau) have been obtained by the above rate expression. The rate constant of the reactions carried out with the different materials was calculated and the values obtained were: k_ZnO =1.574 × 10−2, k_GO =1.01 × 10−2 and k_C-GO-ZnO = 4.7 × 10−3 min−1. The degradation efficiency presented by GO, ZnO and GO-ZnO catalysts was 66.67, 70.84, and 70.07%, respectively. FTIR spectroscopy was used to investigate the interactions between the catalyst and the dye. To the best of our knowledge, waste-derived GO-ZnO has not been previously reported for the photocatalytic degradation of Rhodamine 6G.