Image correction for atmospheric effects (iCOR) is an atmospheric correction tool that can process satellite data collected over coastal, inland or transitional waters and land. The tool is adaptable with minimal effort to hyper- or multi-spectral radiometric sensors. By using a single atmospheric correction implementation for land and water, discontinuities in reflectance within one scene are reduced. iCOR derives aerosol optical thickness from the image and allows for adjacency correction, which is SIMilarity Environmental Correction (SIMEC) over water. This paper illustrates the performance of iCOR for Landsat-8 OLI and Sentinel-2 MSI data acquired over water. An intercomparison of water leaving reflectance between iCOR and Aerosol Robotic Network – Ocean Color provided a quantitative assessment of performance and produced coefficient of determination (R²) higher than 0.88 in all wavebands except the 865 nm band. For inland waters, the SIMEC adjacency correction improved results in the red-edge and near-infrared region in relation to optical in situ measurements collected during field campaigns.

The present study assesses the performance of state-of-the-art atmospheric correction (AC) algorithms applied to Sentinel-2-MultiSpectral Instrument (S2-MSI) and Sentinel-3-Ocean and Land Color Instrument (S3-OLCI) data recorded over moderately to highly turbid estuarine waters, considering the Gironde Estuary (SW France) as a test site. Three spectral bands of water-leaving reflectance ( $Rhow$ ) are considered: green (560 nm), red (655 or 665 nm) and near infrared (NIR) (865 nm), required to retrieve the suspended particulate matter (SPM) concentrations in clear to highly turbid waters (SPM ranging from 1 to 2000 mg/L). A previous study satisfactorily validated Acolite short wave infrared (SWIR) AC algorithm for Landsat-8-Operational Land Imager (L8-OLI) in turbid estuarine waters. The latest version of Acolite Dark Spectrum Fitting (DSF) is tested here and shows very good agreement with Acolite SWIR for OLI data. L8-OLI satellite data corrected for atmospheric effects using Acolite DSF are then used as a reference to assess the validity of atmospheric corrections applied to other satellite data recorded over the same test site with a minimum time difference. Acolite DSF and iCOR (image correction for atmospheric effects) are identified as the best performing AC algorithms among the tested AC algorithms (Acolite DSF, iCOR, Polymer and C2RCC (case 2 regional coast color)) for S2-MSI. Then, the validity of six different AC algorithms (OLCI Baseline Atmospheric Correction (BAC), iCOR, Polymer, Baseline residual (BLR), C2RCC-V1 and C2RCC-V2) applied to OLCI satellite data is assessed based on comparisons with OLI and/or MSI Acolite DSF products recorded on a same day with a minimum time lag. Results show that all the AC algorithms tend to underestimate $Rhow$ in green, red and NIR bands except iCOR in green and red bands. The iCOR provides minimum differences in green (slope = 1.0 ± 0.15, BIAS = 1.9 ± 4.5% and mean absolute percentage error (MAPE) = 12 ± 5%) and red (slope = 1.0 ± 0.17, BIAS = −9.8 ± 9% and MAPE = 28 ± 20%) bands with Acolite DSF products from OLI and MSI data. For the NIR band, BAC provides minimum differences (slope = 0.7 ± 0.13, BIAS = −33 ± 17% and MAPE = 55 ± 20%) with Acolite DSF products from OLI and MSI data. These results based on comparisons between almost simultaneous satellite products are supported by match-ups between satellite-derived and field-measured SPM concentrations provided by automated turbidity stations. Further validation of satellite products based on rigorous match-ups with in-situ $Rhow$ measurements is still required in highly turbid waters.

Water quality measures for inland and coastal waters are available as discrete samples from professional and volunteer water quality monitoring programs and higher-frequency, near-continuous data from automated in situ sensors. Water quality parameters also are estimated from model outputs and remote sensing. The integration of these data, via data assimilation, can result in a more holistic characterization of these highly dynamic ecosystems, and consequently improve water resource management. It is becoming common to see combinations of these data applied to answer relevant scientific questions. Yet, methods for scaling water quality data across regions and beyond, to provide actionable knowledge for stakeholders, have emerged only recently, particularly with the availability of satellite data now providing global coverage at high spatial resolution. In this paper, data sources and existing data integration frameworks are reviewed to give an overview of the present status and identify the gaps in existing frameworks. We propose an integration framework to provide information to user communities through the the Group on Earth Observations (GEO) AquaWatch Initiative. This aims to develop and build the global capacity and utility of water quality data, products, and information to support equitable and inclusive access for water resource management, policy and decision making.

Using airborne drones to monitor water quality in inland, transitional or coastal surface waters is an emerging research field. Airborne drones can fly under clouds at preferred times, capturing data at cm resolution, filling a significant gap between existing in situ, airborne and satellite remote sensing capabilities. Suitable drones and lightweight cameras are readily available on the market, whereas deriving water quality products from the captured image is not straightforward; vignetting effects, georeferencing, the dynamic nature and high light absorption efficiency of water, sun glint and sky glint effects require careful data processing. This paper presents the data processing workflow behind MapEO water, an end-to-end cloud-based solution that deals with the complexities of observing water surfaces and retrieves water-leaving reflectance and water quality products like turbidity and chlorophyll-a (Chl-a) concentration. MapEO water supports common camera types and performs a geometric and radiometric correction and subsequent conversion to reflectance and water quality products. This study shows validation results of water-leaving reflectance, turbidity and Chl-a maps derived using DJI Phantom 4 pro and MicaSense cameras for several lakes across Europe. Coefficients of determination values of 0.71 and 0.93 are obtained for turbidity and Chl-a, respectively. We conclude that airborne drone data has major potential to be embedded in operational monitoring programmes and can form useful links between satellite and in situ observations.

The occurrence of litter in natural areas is nowadays one of the major environmental challenges. The uncontrolled dumping of solid waste in nature not only threatens wildlife on land and in water, but also constitutes a serious threat to human health. The detection and monitoring of areas affected by litter pollution is thus of utmost importance, as it allows for the cleaning of these areas and guides public authorities in defining mitigation measures. Among the methods used to spot littered areas, aerial surveillance stands out as a valuable alternative as it allows for the detection of relatively small such regions while covering a relatively large area in a short timeframe. In this study, remotely piloted aircraft systems equipped with multispectral cameras are deployed over littered areas with the ultimate goal of obtaining classification maps based on spectral characteristics. Our approach employs classification algorithms based on random forest approaches in order to distinguish between four classes of natural land cover types and five litter classes. The obtained results show that the detection of various litter types is feasible in the proposed scenario and the employed machine learning algorithms achieve accuracies superior to 85% for all classes in test data. The study further explores sources of errors, the effect of spatial resolution on the retrieved maps and the applicability of the designed algorithm to floating litter detection.

This work presents a hyperspectral reflectance dataset of macroplastic samples acquired using Analytical Spectral Devices (ASD) FieldSpec 4. Samples analyzed consisted of pristine, artificially weathered, and biofouled plastic items and plastic debris samples collected in the docks of the Port of Antwerp and in the river Scheldt near Temse Bridge (Belgium). The hyperspectral signal of each sample was measured in controlled dry conditions in an optical calibration facility at the Vlaamse Instelling voor Technologisch Onderzoek (VITO; Flemish Institute for Technological Research) and, for a subset of plastics, under wet and submerged conditions in a silo tank at Flanders Hydraulics. The wet and submerged hyperspectral signals were measured in a mesocosm setting that mimicked environmentally relevant concentrations of freshwater microalgae and suspended sediment. The ASD was equipped with an 8^∘ field of view at the calibration facility, and a 1^∘ field of view was used in the mesocosm setting. The dataset obtained complies with the FAIR (Findable, Accessible, Interoperable, Reusable) principles and is available in the open-access repository Marine Data Archive (https://doi.org/10.14284/530, Leone et al., 2021).