Phase transition issues in the field of foods and drugs have significantly influenced these industries and consequently attracted the attention of scientists and engineers. The study of thermodynamic parameters such as the glass transition temperature (Tg), melting temperature (Tm), crystallization temperature (Tc), enthalpy (H), and heat capacity (Cp) may provide important information that can be used in the development of new products and improvement of those already in the market. The techniques most commonly employed for characterizing phase transitions are thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), thermomechanical analysis (TMA), and differential scanning calorimetry (DSC). Among these techniques, DSC is preferred because it allows the detection of transitions in a wide range of temperatures (−90 to 550 °C) and ease in the quantitative and qualitative analysis of the transitions. However, the standard DSC still presents some limitations that may reduce the accuracy and precision of measurements. The modulated differential scanning calorimetry (MDSC) has overcome some of these issues by employing sinusoidally modulated heating rates, which are used to determine the heat capacity. Another variant of the MDSC is the supercooling MDSC (SMDSC). SMDSC allows the detection of more complex thermal events such as solid–solid (Ts-s) transitions, liquid–liquid (Tl-l) transitions, and vitrification and devitrification temperatures (Tv and Tdv, respectively), which are typically found at the supercooling temperatures (Tco). The main advantage of MDSC relies on the accurate detection of complex transitions and the possibility of distinguishing reversible events (dependent on the heat capacity) from non-reversible events (dependent on kinetics).

The drying of fruit juices has advantages such as easy handling of powders, reduction in volume, and preservation of the characteristics of the fruit. Thus, in this work, the effect of the spray drying conditions of strawberry juice (SJ) with maltodextrin (MX) as a carrying agent on the microencapsulation of bioactive compounds and physicochemical properties was studied. The content of phenolic compounds and antioxidant activity showed higher values at low concentrations of MX, while the effect of drying temperature was negligible. The thermal characterization showed that the low molecular weight sugars in the juice decreased the glass transition temperature (Tg). The morphological analysis by scanning electron microscopy (SEM) indicated that at low concentrations of MX, the particles agglomerated, while at intermediate and high concentrations, the particles were observed as well separated. Through microstructural analysis by X-ray diffraction (XRD), the presence of amorphous state was confirmed in all the samples, which is beneficial for preventing chemical and biochemical reactions, and promoting the conservation of the microencapsulated bioactive compounds.

The influence of the processing conditions during the spray drying of mixtures of blueberry juice (BJ) and maltodextrin (MX) was determined quantitatively by the analysis of variance (ANOVA), and qualitatively by the surface response plots (SRP). The effect of two independent variables (inlet temperature, and MX concentration), and one categorical variable (type of MX), was determined on the yield (Y), content (Q), and retention (R) of the antioxidant quercetin 3-d-galactoside. From the ANOVA results, the concentration was the main variable affecting Y and Q, while temperature had a negligible effect, and the low molecular weight MXs exhibited a better response. The physicochemical characterization showed that the powder appearance and microstructure remained unaffected, but size and morphology of the particles varied with the processing conditions. This study established the optimal processing conditions for the spray drying of BJ-MX, and the application limits of the MXs based on the molecular weight distribution.

In Mexico the development of remote laboratories is incipient, in 2020 the National Council of Humanities, Sciences, and Technologies (CONAHCYT) created a network of virtual laboratories with nine of its public research centers in order to create a virtual space that enables the development of experimental and research activities in a distance modality. However, access to virtual laboratories is limited only to its members, and the platforms are still under development. With this motivation, this article presents a multi-institutional project for the design, development, and implementation of a pico-hydraulic system for small-scale power generation for teaching and training purposes with the aim of responding to the current need for distance or virtual teaching of practical knowledge due to the coronavirus disease (COVID‑19) caused by the SARS-CoV-2 virus. For the development of the system, technological innovation tools (QFD, TRIZ) were used, with which the design requirements were obtained considering the users (students and teachers) and the renewable energy-related competence of the curricula. Finally, the satisfaction of the users (students and teachers) with the use of the designed system shows the advantage of including it as part of the practical activities of the subjects to improve the development of power generation, transformation, and transmission system projects.