Jiri Pokorny

Prof. Dr. Jiri Pokorny

VSB – Technical University of Ostrava, Faculty of Safety engineering
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2021 in Energies
Verified
Journal Article
Open access
PDF file
Dawid SzurgaczDawid Szurgacz
Dawid Szurgacz
Sergey ZhironkinSergey Zhironkin
Sergey Zhironkin
Stefan VöthStefan Vöth
Stefan Vöth
Jiri PokornyJiri Pokorny
Jiri Pokorny
A.J.S. (Sam) SpearingA.J.S. (Sam) Spearing
A.J.S. (Sam) Spearing
SLSobik Leszek
Sobik Leszek
The paper discusses the results of a study carried out to determine the thermal condition of a conveyor power unit using a thermal imaging camera. The tests covered conveyors in the main haulage system carrying coal from a longwall. The measurements were taken with a thermal imaging diagnostic method which measures infrared radiation emitted by an object. This technology provides a means of assessing the imminence and severity of a possible failure or damage. The method is a non-contact measuring technique and offers great advantages in an underground mine. The thermograms were analysed by comparing the temperature distribution. An analysis of the operating time of the conveyors was also carried out and the causes of the thermal condition were determined. The main purpose of the research was to detect changes in thermal state during the operation of a belt conveyor that could indicate failure and permit early maintenance and eliminate the chance of a fire. The article also discusses the construction and principle of operation of a thermal imaging camera. The findings obtained from the research analysis on determining the thermal condition of the conveyor drive unit are a valuable source of information for the mine’s maintenance service.

1 August 2018
Verified
Conference Paper
Closed access
JBJakub Brumar
Jakub Brumar
LBLenka Brumarova
Lenka Brumarova
Jiri PokornyJiri Pokorny
Jiri Pokorny
An important aspect at the airport is its safety and security. As part of ensuring safety and security at the airport, individual forces must work together at tactical and operational level. One of the modern ways to improve safety and security can be to unify dispatching centers into one operating center. Verification of the functionality of an operating center can be a form of screening exercise. In the airport area, exercises are very demanding, not only in terms of organization, personnel and technical, but above all financially. The first part of article shows possible distribution of the airport forces in one integrated operational center. In the second part article points on simulations as a teaching methods and outlines the possibility of using simulations to perform an exercise at the airport.

1 October 2017 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
LMLenka MAléřová
Lenka MAléřová
Jiri PokornyJiri Pokorny
Jiri Pokorny
EKE Kristlova
E Kristlova
JWJ Wojnarova
J Wojnarova
The Moldova is facing an increased incidence of floods. For these reasons, the involvement of state in flood protection is rising. Despite the fact that the Moldova is not a member of the European Union, its government follows legislation on prevention, risk assessment and flood protection which is closely connected with landscape. The article deals with the possibilities of using mobile flood barriers in this territory as possible protection of the community.

28 February 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MTMarianna Tomašková
Marianna Tomašková
Jiri PokornyJiri Pokorny
Jiri Pokorny
PKPetr Kučera
Petr Kučera
MBMichaela Balážiková
Michaela Balážiková
DMDaniela Marasová
Daniela Marasová
Fire is defined as an extremely hazardous event, causing a threat to life and health of persons, but also damage to the economic sphere. It has been shown many times that fire can occur anywhere and at any time. In order to minimize the risk of fire manifestations, it is necessary to understand its course. In technical practice, computational models are used to determine the partial manifestations of fire, such as fire spread rate, smoke generation rate in the burning area, formation of toxic burning products, flame height, and others. One of the important characteristics is also the energy balance in the burning area relating to the character of burning material, access of oxygen necessary for exothermic reaction of burning, and reaction of the installed safety devices. In this paper we will point out the fire safety of the building. The FDS (Fire Dynamics Simulator) model is recently used in practice, and its advantage is the possibility to model fire even in large and atypical spaces. The contribution of this paper is the practical application of fire safety of construction using the FDS Model, to reduce the cost of fire safety for the structure being constructed. Attention was paid to evaluating how the heat energy that is released during a fire can be influenced by the installed stable fire-extinguishing equipment, taking into consideration the fire resistance of the building structures.

7 March 2022 in Processes
Verified
Journal Article
Open access
PDF file
Dawid SzurgaczDawid Szurgacz
Dawid Szurgacz
KTKonrad Trzop
Konrad Trzop
JGJan Gil
Jan Gil
Sergey ZhironkinSergey Zhironkin
Sergey Zhironkin
Jiri PokornyJiri Pokorny
Jiri Pokorny
HGHorst Gondek
Horst Gondek
The process of designing a longwall powered support is extremely complex and requires many operations related to the creation of a complete machine. The powered support section is one of the basic elements of the longwall system. It acts as protection for the working space and takes part in the process of excavating and transporting the spoil. The implementation of the support that meets the guidelines of the manufacturer and user requires an endurance analysis at the design stage conducted according to the regulations in force. The main objective of this research, pursued by the authors, was to perform the analysis of the ultimate strength of selected elements of the designed powered support section. The research was carried out with the use of special software that uses the finite element method. This article presents the analysis of the strength limits conducted with the help of the finite element method, determining the strength of selected elements of the longwall support section. The solutions proposed by the authors include changes in the structure and properties of the material in the design process. The aim of the proposed solution was to obtain a model with strength value that meets safety standards. The research results are a valuable source of knowledge for designers. Solutions of this type set examples for spatial models of the longwall support section being designed currently. The analysis presented in the article, together with the results of the research and the conclusions resulting from them, may improve the safety and effectiveness of powered supports.

1 October 2014 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
HGHorst Gondek
Horst Gondek
JNJiří Neruda
Jiří Neruda
Jiri PokornyJiri Pokorny
Jiri Pokorny
One of the major problems of long-distance belt conveyor technology, and not only in the North Bohemian mines, are impacts of rock blocks on the belts which increases the belts wear and reduces their service life. Therefore, in this paper there are widely discussed the rock impacts dynamics, a new type of device - the impact rods intended for significant reducing the number of punctures in the conveyor belts and thus for prolongation of their service life and modeling of the proposed devices. Application of the impact rods is estimated in the impact stands of the systems of conveyors removing the coal extracted by the bucket wheel excavator KU 300.