The aim of this paper is to derive an equation for the temperature distribution in journal bearing oil film, in order to predict the thermal load of a bearing. This is very important for the prevention of critical regimes in a bearing operation. To achieve the goal, a partial differential equation of the temperature field was first derived, starting from the energy equation coupled with the Reynolds equation of hydrodynamic lubrication for a short bearing of symmetric geometry. Then, by solving the equation analytically, the function of temperature distribution in the bearing oil film has been obtained. The solution is applied to the journal bearing, for which the experimental data are available in the references. Finally, the obtained results have been compared to the corresponding experimental values for two operating regimes, and a good level of agreement was achieved.
The paper outlines the development and optimization of an aerodynamic device for a semi-trailer truck model to reduce aerodynamic drag force. The optimization procedure involves the selection of a basic aerodynamic device shape, using airfoil profiles, and refining its shape and position through established optimization techniques like Full Factorial Design and Response Surface Method within the Design of Experiments framework. The test subject is a 1:10 scale model of the semi-trailer truck. To validate the results obtained from the Computational Fluid Dynamics (CFD) simulations, experimental measurements of aerodynamic drag forces were performed in a wind tunnel. This combination of simulation and experimental testing ensures the reliability and effectiveness of the optimization process for improving vehicle aerodynamics.
The paper describes the concept of a new internal combustion engine. Presented IC engine concept possesses a variable displacement, variable compression ratio, combustion at constant volume, improved intake and exhaust processes, as well as more complete expansion of the working fluid. A comparison of some performance of this new concept with conventional IC engine and electric motors is provided. The results indicate that the performance of IC engine can still be improved. The achieved efficiency of the engine is over 40%. The Ricardo Wave program was used for simulating the characteristics of the engine. CAD model of concept engine was made with CATIA V5.
IC engine crankshaft bearings are amongst the most loaded parts of the engine. Forces, acting on crankshaft bearings are changed very intensively during the engine operating cycle. Therefore, it would be very useful to have a visual representation of the bearings wear. For that purpose, a computer program has been developed to generate theoretical wear diagrams for all the crankshaft bearings of the engine. Theoretical wear diagrams provide a picture of the bearing material wear distribution resulting from the bearing load. The bearing load calculations used in the program are based on a statically indeterminate method. The description of the program, followed by some illustrations of its application, has been given in the paper.