Wire arc additive manufacturing (WAAM) has been considered as a promising technology for the production of large metallic structures with high deposition rates and low cost. Stainless steels are widely applied due to good mechanical properties and excellent corrosion resistance. This paper reviews the current status of stainless steel WAAM, covering the microstructure, mechanical properties, and defects related to different stainless steels and process parameters. Residual stress and distortion of the WAAM manufactured components are discussed. Specific WAAM techniques, material compositions, process parameters, shielding gas composition, post heat treatments, microstructure, and defects can significantly influence the mechanical properties of WAAM stainless steels. To achieve high quality WAAM stainless steel parts, there is still a strong need to further study the underlying physical metallurgy mechanisms of the WAAM process and post heat treatments to optimize the WAAM and heat treatment parameters and thus control the microstructure. WAAM samples often show considerable anisotropy both in microstructure and mechanical properties. The new in-situ rolling + WAAM process is very effective in reducing the anisotropy, which also can reduce the residual stress and distortion. For future industrial applications, fatigue properties, and corrosion behaviors of WAAMed stainless steels need to be deeply studied in the future. Additionally, further efforts should be made to improve the WAAM process to achieve faster deposition rates and better-quality control.

The Inconel 625 (IN625) superalloy has a high strength, excellent fatigue, and creep resistance under high-temperature and high-pressure conditions, and is one of the critical materials used for manufacturing high-temperature bearing parts of aeroengines. However, the poor workability of IN625 alloy prevents IN625 superalloy to be used in wider applications, especially in applications requiring high geometrical complexity. Laser powder bed fusion (LPBF) is a powerful additive manufacturing process which can produce metal parts with high geometrical complexity and freedom. This paper reviews the studies that have been done on LPBF of IN625 focusing on the microstructure, mechanical properties, the development of residual stresses, and the mechanism of defect formation. Mechanical properties such as microhardness, tensile properties, and fatigue properties reported by different researchers are systematically summarized and analyzed. Finally, the remaining issues and suggestions on future research on LPBF of IN625 alloy parts are put forward.

Selective laser melting (SLM) is an ideal method to directly fabricate products with high geometrical complexity. With low density and good corrosion resistance, aluminum alloys are widely used as important structural materials. Microstructures and mechanical properties of SLMed aluminum alloys have been recently widely studied. Corrosion behavior as a vital concern during the service of SLMed aluminum alloy parts has also drawn many attentions. Previous studies have found that SLM-processed aluminum alloys exhibit better corrosion resistance compared to the casted and wrought counterparts for both Al-Si alloys and high strength 2xxx Al alloys, which is mainly due to the unique microstructure features of SLMed Al alloys. For Al-Si alloys, with different shapes of Si networks, the different building planes show discrepant corrosion behaviors. Owing to the rougher surface with relatively larger numbers of defects, the as-printed surface is vulnerable to corrosion than the polished. Heat treatment has a negative effect on corrosion resistance due to the breakup of Si networks. The microstructure features correlated with the corrosion behaviors were also reviewed in this paper. Some suggestions on the future study of corrosion behaviors of SLMed Al alloys were put forward.

The global market for Additive Manufacturing (AM) is expected to grow, which may increase the prominence of sustainability aspects in the manufacturing process. A growing number of AM academics and practitioners have started to pay attention to the environmental and societal impacts of AM instead of only focusing on its economic aspect. Yet, AM is still not widely adopted, and the research on AM sustainability is still at the nascent stage. This paper aims to better understand AM’s sustainable adoption and seeks to address three questions: what the sustainability implications of AM are; what challenges may prevent the broad adoption of AM; and what opportunities can enable AM sustainability. The research adopts a multiple case study method to investigate six AM companies that play different roles in the AM ecosystem, including AM design, AM machine, AM material, AM service, AM education, and AM consulting. The results from these studies reveal that AM has the potential to reduce environmental and social impacts; however, it might also cause negative consequences and lead to some rebound effects. We identified 43 categories (synthesized from 199 examples) of key challenges for AM adoption and proposed 55 key solutions in moving AM towards sustainability. It is evident that AM acts as a promising digital technology for manufacturing and has the potential to pave the way for a new era of sustainable manufacturing.

Complex and harsh service environments in the aerospace industry, power industry, automotive industry, injection molding industry and medical industry require components to have spatially tailored properties

Ultrasonic additive manufacturing (UAM), a solid-state additive manufacturing technology, was invented in 1999 by Dawn White