Human movement is a controlled result of the sensory-motor system, and the motor control mechanism has been studied through diverse movements. The present study examined control characteristics of dominant and non-dominant hands by analyzing the transient responses of circular tracking movements in 3D virtual reality space. A visual target rotated in a circular trajectory at four different speeds, and 29 participants tracked the target with their hands. The position of each subject’s hand was measured, and the following three parameters were investigated: normalized initial peak velocity (IPV2), initial peak time (IPT2), and time delay (TD2). The IPV2 of both hands decreased as target speed increased. The results of IPT2 revealed that the dominant hand reached its peak velocity 0.0423 s earlier than the non-dominant hand, regardless of target speed. The TD2 of the hands diminished by 0.0218 s on average as target speed increased, but the dominant hand statistically revealed a 0.0417-s shorter TD2 than the non-dominant hand. Velocity-control performances from the IPV2 and IPT2 suggested that an identical internal model controls movement in both hands, whereas the dominant hand is likely more experienced than the non-dominant hand in reacting to neural commands, resulting in better reactivity in the movement task.
25 January 2024 in Optics and Lasers in Engineering
The human-in-the-loop technology requires studies on sensory-motor characteristics of each hand for an effective human–robot collaboration. This study aims to investigate the differences in visuomotor control between the dominant (DH) and non-dominant hands in tracking a target in the three-dimensional space. We compared the circular tracking performances of the hands on the frontal plane of the virtual reality space in terms of radial position error (ΔR), phase error (Δθ), acceleration error (Δa), and dimensionless squared jerk (DSJ) at four different speeds for 30 subjects. ΔR and Δθ significantly differed at relatively high speeds (ΔR: 0.5 Hz; Δθ: 0.5, 0.75 Hz), with maximum values of ≤1% compared to the target trajectory radius. DSJ significantly differed only at low speeds (0.125, 0.25 Hz), whereas Δa significantly differed at all speeds. In summary, the feedback-control mechanism of the DH has a wider range of speed control capability and is efficient according to an energy saving model. The central nervous system (CNS) uses different models for the two hands, which react dissimilarly. Despite the precise control of the DH, both hands exhibited dependences on limb kinematic properties at high speeds (0.75 Hz). Thus, the CNS uses a different strategy according to the model for optimal results.
The coupling of the energy stability and spatial uniformity of the laser beam before and after second harmonic generation (SHG) was analyzed. SHG experiments were performed using a Nd:YAG nanosecond laser and LBO crystals, and images, pulse shapes, and energies were measured. The relationship between energy stability and spatial uniformity uses a formula derived from the previous study to analyze changes in energy stability and spatial uniformity of the input beam and converted beam. In addition, the measured input beam shape and energy are compared with the results of applying the SHG converting equation considering pump depletion. Both methods were similar to the experimental results when corrected by empirical factors. Through SHG, it was confirmed that there is an optimal point of energy stability and spatial uniformity of the laser beam near the critical power.
We developed a theoretical model for the relationship between the input and amplified laser beams of energy stability and spatial uniformity in the amplification process. 10 Hz, 8 ns, 1064 nm Nd:YAG Q-switched resonator with Nd:YAG main amplifier was employed for the experiment. The theoretical model simulation and Frantz-Nodvik simulation were performed by utilizing the obtained beam image, acquired energy from the experiment, and stored fluence from the gain medium. The result indicated that the fluctuation of the spatial distribution in a single beam influences the stability of temporally distributed energy during the amplification process of the laser beam, thereby improving energy stability.