31 July 2024 in IEEE Transactions on Instrumentation and Measurement
Unmanned aerial vehicles (UAVs) have been widely used in both military and civilian applications, where a stable communication link is vital for safe flight control and robust data transmission. To develop a reliable UAV communication system, it is necessary to deeply understand the UAV channel characteristics and establish accurate channel models. Channel sounding is the most effective way to obtain realistic channel characteristics and validate the theoretical channel model. However, the studies on UAV channel sounding are still insufficient in terms of system design and data processing due to the complexity of developing a UAV channel sounder. Different from the terrestrial channel sounders, the implementation of a UAV channel sounder is tortured by the limited battery life and payload capacity of the UAV platform. The sounding scheme and data post-processing also need to be specially designed for highly dynamic UAV channels. So far, most existing survey studies on UAV channels focus on modeling methodology and model presentation. To fill this gap, this paper provides a comprehensive survey on the design of the UAV channel sounder, in terms of the hardware scheme, sounding signal, time synchronization, calibration, and data post-processing. Current issues and potential research topics behind existing sounding technologies and measurement campaigns are analyzed. Moreover, future challenges and open issues are also discussed.
14 December 2018 in IEEE Transactions on Vehicular Technology
In this paper, a recently conducted measurement campaign for unmanned-aerial-vehicle (UAV) channels is introduced. The downlink signals of an in-service long-time-evolution (LTE) network which is deployed in a suburban scenario were acquired. Five horizontal and five vertical flight routes were considered. The channel impulse responses (CIRs) are extracted from the received data by exploiting the cell specific signals (CRSs). Based on the CIRs, the parameters of multipath components (MPCs) are estimated by using a high-resolution algorithm derived according to the space-alternating generalized expectation-maximization (SAGE) principle. Based on the SAGE results, channel characteristics including the path loss, shadow fading, fast fading, delay spread and Doppler frequency spread are thoroughly investigated for different heights and horizontal distances, which constitute a stochastic model.
11 June 2020 in IEEE Transactions on Communications
In this contribution, a recently conducted measurement campaign for indoor millimeter-wave propagation channels is introduced. A vector network analyzer (VNA)-based channel sounder was exploited to record the channel characteristics at the frequency band from 28-30 GHz. A virtual uniform circular array (UCA) with a radius of 0.25m was formed using a rotator with 360 steps. Moreover, by taking advantage of fiber-optic technique applied in the channel sounder, measurements at 50 positions were performed from an indoor hall to an indoor corridor along a long pre-defined route. A low-complexity highresolution propagation estimation (HRPE) algorithm is exploited to estimate the propagation parameters of multipath components (MPCs). Based on the HRPE estimation results, a novel clustering identification and tracking algorithm is proposed to trace clusters. Composite channel characteristics, cluster-level characteristics and dynamic (or birth-death) behaviours of the clusters are investigated, which constitute a dynamic model for the indoor millimeter-wave channel.
16 January 2017 in IEEE Access
In this paper, a measurement campaign for massive multiple-input multiple-output (MIMO) channel characterization in both line-of-sight (LoS) and non-LoS outdoor environments is introduced. The measurements are conducted at the center frequency of 15 GHz with a bandwidth of 4 GHz. A virtual 40 × 40 planar antenna array formed by stepping a vertically-polarized bi-conical omni-directional antenna (ODA) along regularly-spaced grids is used in the receiver (Rx). The transmitter is equipped with a single ODA. To investigate channel variations over the Rx array, this 1600-element Rx array is split into multiple 7 × 7 sub-arrays, and a maximum-likelihood parameter estimation algorithm implemented using the space-alternating generalized expectation-maximization principle is applied to extracting multipath components (MPCs) from sub-array outputs. The spatial variability of K-factor, composite channel spreads in delay, azimuth, and elevation of arrival are investigated. Based on the estimated MPCs' parameters, multipath clusters are identified and associated across the array to find the so-called spatial-stationary (SS) clusters. From several hundreds of SS-clusters extracted, we establish a stochastic model for their life distances in horizontal and vertical directions, two-dimensional (2-D) life region, and variations of cluster spreads. These findings are important for massive MIMO channel modeling in the cases, where 2-D largescale arrays are considered.
18 August 2020 in IEEE Transactions on Antennas and Propagation
Due to the decrease in cost, size and weight, Unmanned Aerial Vehicles (UAVs) are becoming more and more popular for general-purpose civil and commercial applications. Provision of communication services to UAVs both for user data and control messaging by using off-the-shelf terrestrial cellular deployments introduces several technical challenges. In this paper, an approach to the air-to-ground channel characterization for low-height UAVs based on an extensive measurement campaign is proposed, giving special attention to the comparison of the results when a typical directional antenna for network deployments is used and when a quasi-omnidirectional one is considered. Channel characteristics like path loss, shadow fading, root mean square delay and Doppler frequency spreads and the K-factor are statistically characterized for different suburban scenarios.