18 August 2020 in IEEE Transactions on Antennas and Propagation
Due to the decrease in cost, size and weight, Unmanned Aerial Vehicles (UAVs) are becoming more and more popular for general-purpose civil and commercial applications. Provision of communication services to UAVs both for user data and control messaging by using off-the-shelf terrestrial cellular deployments introduces several technical challenges. In this paper, an approach to the air-to-ground channel characterization for low-height UAVs based on an extensive measurement campaign is proposed, giving special attention to the comparison of the results when a typical directional antenna for network deployments is used and when a quasi-omnidirectional one is considered. Channel characteristics like path loss, shadow fading, root mean square delay and Doppler frequency spreads and the K-factor are statistically characterized for different suburban scenarios.
22 March 2021 in IEEE Transactions on Wireless Communications
During the last few years, with the decrease of their sizes and costs, Unmanned Aerial Vehicles (UAVs) became more feasible for their use in general-purpose applications. As an important basis for UAV applications, the Air-to-Ground (A2G) radio propagation channel has gained attention in the channel modeling literature. However, whereas the A2G propagation channel is inherently dynamic (time-varying), the majority of the available models do not consider such a time-variability. This paper proposes a channel multi-path component (MPC) tracking algorithm and shows its ability to analyze the data collected by a real A2G measurement campaign in a suburban environment. Based on the obtained results, a time-varying statistical channel model for A2G communications in realistic suburban scenarios is proposed. The model is able to stochastically characterize parameters related to the birth and time-of-life of the multi-path components (MPCs), as well as their evolution in terms of delay, Doppler frequency or magnitude. Correlation coefficients to relate different channel characteristics are also obtained. Our work shows that the MPCs evolution over time for the UAV A2G channel can be described by simple regular patterns.
18 December 2020 in IEEE Transactions on Wireless Communications
In parallel with the decrease in cost, size and weight of Unmanned Aerial Vehicles (UAVs) and the increase of their flight autonomy, many commercial applications are rapidly arising. Most of those applications rely on a communications system between a terrestrial base station and the UAV. Due to the UAV movement, time-variant channel models are required. In this paper, we propose a geometrical model for the channel Multipath Components (MPCs) evolution with the UAV flight that supports MPCs that are born and die in several occasions due to blockages. Based on this model, the novel Geometry-Based Spatial-Consistent MPC Tracking Method (GSTM) is proposed and its performance on channel MPCs tracking was shown both by simulations and by an Air-to-Ground (A2G) low-height UAV measurement campaign. The GSTM also provides the parameters of a geometrical model of the evolution of the main MPCs of the channel, which allows to identify the scatterers that lead to the MPCs and greatly contributes to the understanding of the propagation mechanisms in A2G environments. The correctness of the MPC tracking is proven to be higher than 90% and the results show that the model obtained by the GSTM includes more than 95% of the received power.
12 July 2024 in IEEE Transactions on Antennas and Propagation
Sub-Terahertz (sub-THz), which encompasses a frequency range between 100-300 GHz, is anticipated to be an important element in the development of future sixth-generation (6G) communication systems due to its vast untapped bandwidth resource. Developing the realistic sub-THz channel model is essential for designing and deploying future 6G communication systems. We presented the channel measurements and characterization of a recent sub-THz channel measurement campaign conducted in an indoor hall scenario at sub-THz bands in this work. The channel measurement campaign was conducted with 55 transmitter (Tx)-receiver (Rx) deployment locations (including two pre-defined ‘L’-shape routes) covering the Tx-Rx distance range of [3, 58]m at 99-101 GHz using a phase-compensated long-range channel sounder. A channel parameter estimation algorithm is exploited to extract the multipath component (MPC) parameters. The composite channel parameters, i.e., path loss, delay spread, angular spread, and K -factor, are calculated and analyzed using the extracted MPC parameters. It is seen that the spreads of delay and angular and the K -factor statistically obey log-normal distributions and the normal distribution, respectively, and the fitting parameters are concluded for statistical modeling. An MPC trajectory tracking algorithm was also utilized to trace the MPC trajectories in the two routes. The MPC-level channel parameters were then investigated based on the trajectory results. The proposed 100 GHz channel model for the indoor scenario was also compared with the existing channel models. This work provides an accurate and comprehensive indoor channel characterization, filling the gap in statistical channel models for this frequency band.
13 May 2025 in IEEE Transactions on Wireless Communications
Terahertz (THz) integrated sensing and communication (ISAC) aims to integrate novel functionalities, e.g., environmental sensing, into communication systems. Accurate channel modeling is crucial for the design and performance evaluation of future ISAC systems. This paper presents a novel hybrid channel model and a high-precision environment reconstruction framework for THz monostatic sensing. Vector network analyzer (VNA)-based channel measurements using the directional scanning sounding (DSS) scheme are performed in a laboratory environment at 300 GHz with a 20 GHz bandwidth. A low-complexity space-alternating generalized expectation-maximization (SAGE)-based algorithm is proposed to estimate the parameters of the multipath propagation components (MPCs) and to de-embed the antenna pattern. Leveraging geometric principles, the MPCs are classified into specular and diffuse components. In our proposed framework, the specular components are used for material detection and identification, while the diffuse components are leveraged to enhance geometric environment reconstruction. Demonstrations of both geometrical environment reconstruction and material identification are provided to validate the effectiveness of the proposed approach. This work offers valuable insights into THz monostatic sensing channel modeling and the design of future THz ISAC systems.