Fernando Jorge Monteiro Dias

Dr. Fernando Jorge Monteiro Dias


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 August 2023 in Energies
Verified
Journal Article
Open access
PDF file
BSBárbara Maria Oliveira Santos
Bárbara Maria Oliveira Santos
FDFernando Jorge Monteiro Dias
Fernando Jorge Monteiro Dias
Frederic TrillaudFrederic Trillaud
Frederic Trillaud
GSGuilherme Goncalves Sotelo
Guilherme Goncalves Sotelo
RJRubens de Andrade Junior
Rubens de Andrade Junior
Superconducting electric machines (SEMs) have the potential to be commercially available in the coming years. This commercialization depends on the availability of high-temperature superconductors (HTS) produced on a large scale. HTSs have high current densities and low losses, making them the leading technology choice for future light and compact high-power-density superconducting rotating machines, with a particular niche for high torque at low frequency. The advantages of SEM in its fully superconducting design or hybrid configuration (conventional stator, superconducting rotor) inherit from the characteristics of the superconductor material. So, they can show greater efficiency at a higher power density and lighter frame than their conventional counterparts for an equivalent power rating. Applications like electric aircraft, naval propulsion, and wind turbines, among others, are likely to use SEMs if the rated power has to be increased beyond what is technically available with conventional technology. In this context, this paper reviews SEMs and their applications. However, it also aims to highlight the main the literature projects with a minimal Technology Readiness Level (TRL) larger than three. Due to the diversity of the superconductors’ characteristics and the variety of machines, the modes of operation of SEMs can be quite distinct from conventional machines. Taking into account such diversity, SEMs are presented and sorted out by their operational principles and the choice of superconducting material. Finally, the future perspectives of SEM are discussed.

8 February 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
FDFernando Jorge Monteiro Dias
Fernando Jorge Monteiro Dias
BSBárbara Maria Oliveira Santos
Bárbara Maria Oliveira Santos
GSGuilherme Goncalves Sotelo
Guilherme Goncalves Sotelo
APAlexander Polasek
Alexander Polasek
RARubens de Andrade
Rubens de Andrade
In this paper, we investigate a topology of superconducting electric machine, which uses stacks of second-generation (2G) superconducting tapes. These stacks have been used as an alternative to replace bulks in trapped field superconducting machines. In this context, we built prototypes of superconducting machines with 2G tapes spirally disposed on the rotor. These prototypes were tested in liquid nitrogen bath at 77 K for operation in two regimes: synchronous and asynchronous. The operation mode is according to the load torque. To perform the torque tests under these operating conditions, a measurement system was also built. Quasi-static torque, locked rotor torque with stator frequencies up to 60 Hz, and dynamic torque up to 1200 rpm were measured. The prototype with 2G high temperature superconductor (HTS) stacks presented a torque, very close to nominal value of this machine with permanent magnets in the rotor. Promising results have been found showing that 2G HTS may be an alternative to superconducting bulks.

6 July 2022 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
FDFernando Jorge Monteiro Dias
Fernando Jorge Monteiro Dias
GSGuilherme Goncalves Sotelo
Guilherme Goncalves Sotelo
RJRubens de Andrade Junior
Rubens de Andrade Junior
The demand for high power density electrical machines grows in aircraft and ships for their propulsion systems. Superconducting machines can be an attractive alternative for these applications. In this context, the present work presents a study comparing a superconducting motor with a squirrel-cage induction motor operating at room and cryogenic temperatures. The superconducting electric machine uses 2G tapes stacked on the rotor. The study is based on experiments with bench prototypes of conventional induction motors and superconducting motors having equal dimensions. The rotor is composed of three superconducting tape rows, which are stacked in a spiral shape around a soft ferromagnetic core. The operating principle of this machine considers the interaction of the rotating field produced by the stator with the magnetic field trapped in the superconducting tapes stacked in the rotor. A commercial 0.5-hp squirrel-cage induction motor was adapted for the tests in different circumstances for operation in an extensive temperature range. The induction machine was tested at liquid nitrogen temperature and room temperature. The results of all prototypes were compared. The authors observed that, up to 80% of the rated load, the superconducting machine works in a synchronous regime, and for higher torque’s levels, it is asynchronous. Besides, it increased the torque 1.24 times and 2.43 times for the induction motor operating at room temperature and 77 K, respectively. The results showed that this superconducting machine has the potential for high power density applications.

27 April 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
BSBárbara Maria Oliveira Santos
Bárbara Maria Oliveira Santos
FDFernando Jorge Monteiro Dias
Fernando Jorge Monteiro Dias
FSFelipe Sass
Felipe Sass
GSGuilherme Goncalves Sotelo
Guilherme Goncalves Sotelo
APAlexander Polasek
Alexander Polasek
RARubens de Andrade
Rubens de Andrade
This work consists on the first finite element analysis of quasi-static test of a superconducting machine with stacks of coated conductors arranged spirally around the rotor. The behavior of the machine as a generator is also investigated. Hybrid A-V-H 2D formulation and moving mesh were used as modelling framework. The stacks are represented with the homogenization technique. Quasi-static test is simulated considering a field cooling initial state and the generator simulation, a pulse field magnetization. Current density and magnetic flux density along the stack surface as well as speed and torque results are analyzed. When the machine is not moving, major current density loops are induced in the stack, following the magnetic poles. These loops are deformed by the current density induced by speed differences between stator and rotor. The quasi-static torque does not change with position. The simulation results prove the potential this topology has of operating as a generator. The quasi-static results are in agreement with measurements made with the prototype.

27 February 2024 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
AQAndré T. Queiroz
André T. Queiroz
ABAlexandre Bitencourt
Alexandre Bitencourt
CNCauê Nogueira
Cauê Nogueira
FMFlávio G. R. Martins
Flávio G. R. Martins
FDFernando Jorge Monteiro Dias
Fernando Jorge Monteiro Dias
GSGuilherme Goncalves Sotelo
Guilherme Goncalves Sotelo
A Hybrid Fault Current Limiter (HFCL) is a device that combines the properties of both Superconducting Fault Current Limiter (SFCL) and Solid-State Fault Current Limiter (SSFCL). This combination aims to provide the fast response time typically associated with SFCLs and simultaneously provide the capacity to withstand longer limitation time and reliable application under high voltages, as found in SSFCLs. In this context, an HFCL prototype was tested to analyze its performance and compare its characteristics with those of the SFCL and the SSFCL modules separately. This work aims to demonstrate that the HFCL presents a high level of protection, besides being more compact and cost-effective compared to SFCLs, since the proposed hybrid device can be designed using less HTS material than common resistive SFCL. Experimental tests were made to analyze the current limitation capacity for the three FCLs. The results showed that the HFCL could reduce the fault current with a reliable fault detection system.

3 November 2014 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
DDD. H. N. Dias
D. H. N. Dias
GSGuilherme Goncalves Sotelo
Guilherme Goncalves Sotelo
FDFernando Jorge Monteiro Dias
Fernando Jorge Monteiro Dias
LRL. M. M. Rocha
L. M. M. Rocha
FMF. G. R. Matins
F. G. R. Matins
APA. Polasek
A. Polasek
Due to the electrical characteristics of second generation (2G) high temperature superconductor (HTS) wires, such as higher critical current density and superior performance than first generation (1G) HTS wire under magnetic fields, they have been chosen for use in the development of several superconducting devices for electric power applications. Since the majority of the electrical devices are designed using a conductor coil, it is necessary to understand the electrical characteristics of superconducting coils under different situations, to develop these equipment. An important aspect that should be considered in the project of 2G HTS coils is the influence of its self field. This effect could lead to a reduction in the 2G HTS wire critical current value resulting in damages due to heterogeneous quenching Therefore, this work aims the construction of a HTS coil using 2G wires, and the determination of its DC critical current under different conditions. The influence of the coil bending radius, by going to the minimum value recommended by the manufacturer, was also investigated. These measurements are essential for the development of electric power devices.