Ferroelectric hafnium and zirconium oxides have undergone rapid scientific development over the last decade, pushing them to the forefront of ultralow-power electronic systems. Maximizing the potential application in memory devices or supercapacitors of these materials requires a combined effort by the scientific community to address technical limitations, which still hinder their application. Besides their favorable intrinsic material properties, HfO2–ZrO2 materials face challenges regarding their endurance, retention, wake-up effect, and high switching voltages. In this Roadmap, we intend to combine the expertise of chemistry, physics, material, and device engineers from leading experts in the ferroelectrics research community to set the direction of travel for these binary ferroelectric oxides. Here, we present a comprehensive overview of the current state of the art and offer readers an informed perspective of where this field is heading, what challenges need to be addressed, and possible applications and prospects for further development.
The local crystal phase and orientation of ferroelectric grains inside TiN/Hf0.5Zr0.5O2/TiN have been studied by the analysis of the local electron beam scattering Kikuchi patterns, recorded in transmission. Evidence was found that the ferroelectric phase of the layers is derived from an orthorhombic phase, most likely of space group Pca21. The orientation analysis reveals a strong out-of-plane texture of the polycrystalline film which is in accordance with a high remanent polarization Pr observed for P-V measurements. The results of this analysis help us to further optimize the ratio of ferroelectric grains and their orientation for many applications, e.g., in the field of emerging memory or infrared sensors.
31 March 2021 in IEEE Transactions on Electron Devices
In spite of the increasing use of machine learning techniques, in-memory computing and hardware have increased the interest to accelerate neural network operation. Henceforth, novel embedded nonvolatile memories (eNVMs) for highly scaled technology nodes, like ferroelectric field effect transistors (FeFETs), are heavily studied and very promising. Furthermore, inference and on-chip learning can be fostered by further eNVM technology options, such as multibit operation and linear switching. In this article, we present the advantages of hafnium oxide-based FeFETs for such purposes due to their basic three-terminal structure, which allows to selectively activate or deactivate selected devices as well as tune linearity and dynamic range for certain applications. Furthermore, we discuss the impact of the material properties of the ferroelectric layer, the interface layer thickness, and scaling on the device performance. Here, we demonstrate good device properties even for highly scaled devices (100 nm x 100 nm).
3 April 2021 in Physica Status Solidi (RRL) – Rapid Research Letters
Ferroelectric hafnium oxide (HfO2) is considered a very prospective material for applications in integrated devices due to its considerably large spontaneous polarization and superior thickness scaling. In fact, the evolution of the ferroelectric hysteresis upon field cycling plays an important role in most applications; especially the so‐called wake‐up effect that describes the increase of remanent polarization for initial field cycling, needs a profound understanding in HfO2. Herein, the discovery of electric field–induced crystallization in hafnium oxide is reported. In addition, differences in the wake‐up behavior are addressed that finally can be categorized into five different cases, all being relevant when describing the evolution of ferroelectricity. Moreover, analysis of the temperature dependence and transmission Kikuchi diffraction provides insight into the underlying physical mechanisms of different wake‐up behavior scenarios, and proves ferroelastic switching as the origin for the observed antiferroelectric‐like behavior. This knowledge provides clear procedures of 1) how to experimentally quantify and 2) how to prepare and manufacture hafnium oxide phases for the five different wake‐up types.
The microstructure of ferroelectric hafnium oxide plays a vital role for its application, e.g., non-volatile memories. In this study, transmission Kikuchi diffraction and scanning transmission electron microscopy STEM techniques are used to compare the crystallographic phase and orientation of Si and Zr doped HfO2 thin films as well as integrated in a 22 nm fully-depleted silicon-on-insulator (FDSOI) ferroelectric field effect transistor (FeFET). Both HfO2 films showed a predominately orthorhombic phase in accordance with electrical measurements and X-ray diffraction XRD data. Furthermore, a stronger texture is found for the microstructure of the Si doped HfO2 (HSO) thin film, which is attributed to stress conditions inside the film stack during crystallization. For the HSO thin film fabricated in a metal-oxide-semiconductor (MOS) like structure, a different microstructure, with no apparent texture as well as a different fraction of orthorhombic phase is observed. The 22 nm FDSOI FeFET showed an orthorhombic phase for the HSO layer, as well as an out-of-plane texture of the [111]-axis, which is preferable for the application as non-volatile memory.
Piezoelectric thin films are of current interest in science and industry for highly integrated nano-electro-mechanical-systems and sensor devices. In this study, the dependence of the piezoelectric properties on the doping concentration in Si:HfO2 thin films and their crystallographic origin are investigated. The Si:HfO2 films with a thickness of 20 nm and various Si doping concentrations in the range of 2.7–5.6 cat.% were examined. The relationship between the piezoelectric displacement and remanent polarization is studied during wake-up from the antiferroelectric-like pristine state until the cycled ferroelectric state, which reveals an application-dependent optimal doping concentration. Furthermore, the piezoelectric and ferroelectric properties, as well as the relative permittivity, were measured over wake-up, thus giving a glimpse at the underlying mechanism of the transition from a pristine antiferroelectric-like behavior to a ferroelectric/piezoelectric one, revealing a pre-existing polar phase that is reorienting during wake-up. The studied samples show a strong displacement and polarization dependence on the doping concentration. Hence, the stoichiometry is an excellent parameter for the application-specific adjustment of complementary metal–oxide–semiconductor compatible piezoelectric thin films.