Phosphorus has been identified as a critical element by the European Union and recycling efforts are increasingly common. An important phosphorus-containing waste stream for recycling is municipal sewage sludge (MSS), which is used directly as fertilizer to farmland. However, it contains pollutants such as heavy metals, pharmaceutical residues, polychlorinated bi-phenyls (PCBs) and nano-plastics. The interest in combustion of MSS is continuously growing, as it both reduces the volume as well as destroys the organic materials and could separate certain heavy metals from the produced ashes. This results in ashes with a potential for either direct use as fertilizer or as a suitable feedstock for upgrading processes. The aim of this study was to investigate co-combustion of MSS and biomass to create a phosphorus-rich bottom ash with a low heavy metal content. A laboratory-scale fixed-bed reactor in addition to an 8 MWth grate-boiler was used for the experimental work. The concentration of phosphorus and selected heavy metals in the bottom ashes were compared to European Union regulation on fertilizers, ash application to Swedish forests and Swedish regulations on sewage sludge application to farmland. Element concentrations were determined by ICP-AES complemented by analysis of spatial distribution with SEM-EDS and XRD analysis to determine crystalline compounds. The results show that most of the phosphorus was retained in the bottom ash, corresponding to 9–16 wt.% P₂O₅, while the concentration of cadmium, mercury, lead and zinc was below the limits of the regulations. However, copper, chromium and nickel concentrations exceeded these standards.

Sewage sludge is regarded as a potential source for soil fertilizer However, the direct utilization of sewage sludge in agricultural land is restricted since it also contains heavy metals, pathogens, and toxic compounds. Pyrolysis of the sewage sludge destroys the organic pollutants and partly volatilizes the heavy metals. In this study, pyrolysis of sewage sludge was carried out in order to determine the optimum residence time and temperature to recover the phosphorous and remove heavy metals from the resultant sewage sludge char (SSC). Pyrolysis was conducted on dried sewage sludge (DSS) by means of thermogravimetric analysis (TGA) and high-temperature oven with an N₂-atmosphere. Microwave Plasma-Atomic Emission Spectroscopy (MP-AES) was used to determine the concentration of P and trace elements in the resulting solid char fraction. A combination of chemical fractionation (step-by-step leaching) of the DSS and thermodynamic equilibrium calculations were utilized to estimate the availability of phosphorous and removal of heavy metals in the SSC fraction at different temperatures. The results from the thermodynamics calculation were in line with the measured chemical composition of the SSC. Furthermore, the energy contents of the SSC obtained at different temperatures were measured. The pyrolysis evaluation results indicate that phosphorous was enriched in the char, while lead, zinc, and cadmium were significantly removed.

Co-combustion of animal waste, in waste-to-energy boilers, is considered a method to produce both heat and power and to dispose of possibly infected animal wastes. This research conducted full-scale combustion tests to identify the impact of changed fuel composition on a fluidized-bed boiler. The impact was characterized by analyzing the deposit formation rate, deposit composition, ash composition, and emissions. Two combustion tests, denoted the reference case and animal waste case, were performed based on different fuel mixes. In the reference case, a normal solid waste fuel mix was combusted in the boiler, containing sorted industry and household waste. In the animal waste case, 20 wt% animal waste was added to the reference fuel mix. The collected samples, comprising sampling probe deposits, fuel mixes, bed ash, return sand, boiler ash, cyclone ash and filter ash, were analyzed using chemical fractionation, SEM-EDX and XRD. The results indicate decreased deposit formation due to animal waste co-combustion. SEM-EDX and chemical fractionation identified higher concentrations of P, Ca, S, and Cl in the bed materials in the animal waste case. Moreover, the risk of bed agglomeration was lower in the animal waste case and also a decreased rate of NO_x and SO₂ emissions were observed.

Phosphorus (P) recovery and recycling play a crucial role in improving resource efficiency, sustainable nutrient management and moving toward circular economy. Increasing demand for fertilizers, signs of geopolitical constraints, and high discharge of P to waterbodies are the other reasons to pursue the circularity of P. Various research have been carrying out and several processes have been developed for P-recovery from different resources. However, there is still a huge unexplored potential for P-recovery specially in the regional framework from the four main P-rich waste resources: food waste, manure, mining waste, and sewage sludge. This study reviews recovery methods of P from these secondary resources comprehensively. Additionally, it analyzes the Nordic viewpoint of P-cycle by evaluating Nordic reserves, demands, and secondary resources to gain a systematic assessment of how Nordic countries could move toward circular economy of P. Results of this study show that secondary resources of P in Nordic countries have the potential of replacing mineral fertilizer in these countries to a considerable extent. However, to overcome the challenges of P-recovery from studied resources, policymakers and researchers need to take decisions and make innovation along each other to open the new possibilities for Nordic economy.

Microplastics (MPs) and nanoplastics (NPs) are emerging aquatic contaminants that pose environmental and public health risks due to their persistence, ubiquity, and ability to adsorb co-contaminants. This scoping review synthesises findings from 57 experimental studies and five review studies published between 2019 and 2025 on the use of biochar-based materials for the removal of microplastics from water and wastewater. Guided by the hypothesis that surface-modified biochars, such as magnetised, surfactant-coated, or chemically activated forms, achieve high removal efficiencies through multimodal mechanisms (e.g., electrostatic attraction, hydrophobic interactions, π–π stacking, and physical entrapment), this review applies PRISMA-based protocols to systematically evaluate biochar feedstocks, pyrolysis conditions, surface modifications, polymer types, removal mechanisms, and regeneration approaches. Scopus, Web of Science, and PubMed were searched until 30 May 2025 (English-only), and 62 studies were included. The review was not registered, and no protocol was prepared. The results confirm a high removal efficiency (>90%) in most experimental studies, particularly under controlled laboratory conditions and using pristine polystyrene. However, the performance declines significantly in complex matrices (e.g., wastewater and surface water) owing to dissolved organic matter, ionic competition, and particle heterogeneity, thus supporting the guiding hypothesis. This review also identifies critical methodological gaps, including narrow plastic typologies, a lack of standardised testing protocols, and limited field-scale validation. Addressing these gaps through environmentally realistic testing, regeneration optimisation, and harmonised methods is essential for transitioning biochar from a promising sorbent to a practical water treatment solution.