Damian Janczak

Damian Janczak


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 September 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Wojciech CzekałaWojciech Czekała
Wojciech Czekała
Damian JanczakDamian Janczak
Damian Janczak
Patrycja PochwatkaPatrycja Pochwatka
Patrycja Pochwatka
MNMateusz Nowak
Mateusz Nowak
Jacek DachJacek Dach
Jacek Dach
The vegetable production is an important part of agriculture sector in every country. In Poland, vegetables and fruits production covering the area of no more than 3% of agricultural land, is more than 36% of plant production and 14–15% of the whole agricultural production. The study aim was to determine the management possibilities of the selected waste from vegetable production in composting process. Laboratory tests were carried out using the bioreactor set-up with capacity of 165 dm3, respectively, for each chamber. The composting process has been tested for the following mixtures: K1—cabbage leaves, tomato dry leaves + manure and slurry additive; K2—cabbage leaves, solid fraction from biogas plant + manure and straw additive; K3—cabbage leaves, onion husk + straw additive. In all three composts the thermophilic phase occurred which indicates that the process ran correctly. In each chamber, the temperature exceeded 70 °C and its maximum value during the experiment was 77.5 °C for K2 compost. The article discusses changes in O2, CO2, NH3 and H2S emissions during composting. The carbon dioxide concentration in the exhausted gas from analyzed composts and the ratio with oxygen they testify to the decomposition of raw materials in the composting process. The results showed that the agri-food waste can be a proper substrate for composting production. Due to legal regulations and the increase in prices of mineral fertilizers, the development of the compost market should be expected.

1 April 2023 in Journal of Ecological Engineering
Verified
Journal Article
Open access
AKAlina Kowalczyk-Juśko
Alina Kowalczyk-Juśko
Patrycja PochwatkaPatrycja Pochwatka
Patrycja Pochwatka
JMJakub Mazurkiewicz
Jakub Mazurkiewicz
Jakub PulkaJakub Pulka
Jakub Pulka
BKBarbara Kępowicz
Barbara Kępowicz
Jacek DachJacek Dach
Jacek Dach
Digestate from a biogas plant can be a valuable organic and mineral fertilizer. Quantitative proportions of co-substrates used in three agricultural biogas plants in Poland were analyzed. The composition of digestates was examined and large differences in the content of macronutrients were found,...

26 October 2020 in Water
Verified
Journal Article
Open access
PDF file
JMJakub Mazurkiewicz
Jakub Mazurkiewicz
AMAgata Mazur
Agata Mazur
Robert MazurRobert Mazur
Robert Mazur
KCKrzysztof Chmielowski
Krzysztof Chmielowski
Wojciech CzekałaWojciech Czekała
Wojciech Czekała
Damian JanczakDamian Janczak
Damian Janczak
The article discusses the impact of nutrients from sewage on the state of the sewage receiver. Bioremediation was carried out through the use of effective microorganisms. The potential recovery of valuable mineral and organic substances in the form of fertilizers was also examined. The Słoneczko Reservoir is a bathing area and serves many people in the summertime as a place of water recreation. Water quality deteriorated intensively from 2006 as a result of illegal wastewater discharge and the impact of fecal pollution from bathers. The high concentration of nutrients in the water was the cause of the eutrophication process and blooms of cyanobacteria, which pose a threat to human health in the bathing area. The bathing area was also closed many times by sanitary services as a result of exceeding the number of Escherichia coli and Enterococcus faecalis in the water. At the bottom of the reservoir, there was a layer of sediments with a thickness of 30–70 cm. Thus, the processes of anaerobic decomposition generated odor, causing nuisance in the reservoir area. Water transparency varied from 30 to 50 cm, due to the accumulation of suspensions and biomass of planktonic algae. The reservoir was subjected to microbiological bioremediation in 2017 and 2018 to polluted water treatment and to reduce the organic content of bottom sediments. Already after the first application of biopreparations putrefactive odors and the eutrophication process disappeared at the end of the 2017 summer season. Bioremediation reduced the value of E. coli and E. feacalis to the acceptable level. After the second application in 2018, the organic fraction of the bottom sediments was reduced to a very low level and the water transparency reached the bottom (maximum depth was 2.2 m) throughout the entire bathing area. The effect of the water remediation was maintained until 2019, and the surface water quality remained at a very good level. An important aspect in this case is also the exploitation of bottom sediments, because they are rich in nutrients and organic matter, and therefore it may have some potential as a fertilizer. The recovery of nutrients can be used in plant or pot production. However, they contain compounds that degrade quickly, causing unpleasant odors and threatening the environment. Thus, they should be managed and handled in an environmentally friendly and sustainable way.

10 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
AKAlina Kowalczyk-Juśko
Alina Kowalczyk-Juśko
AMAndrzej Mazur
Andrzej Mazur
Patrycja PochwatkaPatrycja Pochwatka
Patrycja Pochwatka
Damian JanczakDamian Janczak
Damian Janczak
Jacek DachJacek Dach
Jacek Dach
The giant miscanthus (Miscanthus × giganteus) is one of the most essential energy plants. It also finds various alternative uses, including installing belts to prevent soil erosion. Biomass from such belts should be removed and rationally managed every year. The parameters of miscanthus biomass were investigated in terms of its suitability for combustion and anaerobic fermentation. Under the conditions of the experiment, miscanthus achieved a stable yield already in the second year of vegetation, mainly due to the high planting density. Energy parameters turned out to be typical for straw biomass (calorific value 18.06 MJ/kg). Relatively low ash melting temperatures (<1400 °C) and their chemical composition meant a high risk of contamination depositing on heating devices, which is often indicated as a shortcoming of biomass compared to hard coal. Miscanthus silage can be a valuable substrate for anaerobic digestion, but it requires a sufficiently early harvest, which affects the yield of biomass. The yield of energy in biomass obtained after drying plants was 163,623.6 MJ/ha. In contrast, the yield of energy from biomass collected in summer and processed into biomethane was much lower and amounted to 72,978.2 MJ/ha.

12 September 2024 in Energies
Verified
Journal Article
Open access
PDF file
SKSebastian Kujawiak
Sebastian Kujawiak
MMMałgorzata Makowska
Małgorzata Makowska
Damian JanczakDamian Janczak
Damian Janczak
Wojciech CzekałaWojciech Czekała
Wojciech Czekała
WKWłodzimierz Krzesiński
Włodzimierz Krzesiński
Karol KupryaniukKarol Kupryaniuk
Karol Kupryaniuk
As a by-product of wastewater treatment, sewage sludge can be used for natural, agricultural, or energy purposes. One method of preparing sludge for management and use is solar drying. To intensify the drying process, natural additives can be used to alter the structure of the sludge and accelerate the evaporation of water. This research aimed to evaluate the influences of different organic additives in sewage sludge mixtures on the physicochemical and energy parameters of briquettes. This research was carried out without thermal boosting in a 4 × 2.5 × 2 m plastic tunnel. The tunnel was equipped with three drying stations and control and measuring equipment. In two test series, sludge additives in the form of straw and lignocellulosic materials, sawdust, bark, woodchips, and walnut shells, were used. Briquettes were made from the resulting mixtures and then subjected to physical and chemical analyses. This research showed high variability in the contents of trace elements, nitrogen, and sulphur in relation to an increase in the amount of sludge in the briquettes, which, for the briquettes made from sewage sludge, was nearly twice as high as for the briquettes made from the mixtures. The results of the flue gas analysis for the briquettes with sawdust and wood chip additives were very similar. The briquettes made from sewage sludge with lignocellulosic materials (bark and wood chips) had fuel properties similar to woody biomass, with a calorific value and heat of combustion of 15–16 MJ/kg. Fibrous additives (straw) significantly increased the strength parameters of the briquettes, by more than 50% of the value. The compositions and properties of the mixtures affected the following briquetting parameters: temperature and compressive force. The briquettes made from sewage sludge and additives can be classified according to ISO 21640 as SRFs (solid recovered fuels). In most of the results, the net calorific value (NCV) was 3 to 4; the chlorine content (CL) was 2 to 1; and the mercury content (Hg) was 1. The sewage sludge mixtures facilitated the agricultural and energy use of the briquettes.

20 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
Karol KupryaniukKarol Kupryaniuk
Karol Kupryaniuk
TOTomasz Oniszczuk
Tomasz Oniszczuk
MCMaciej Combrzyński
Maciej Combrzyński
KLKatarzyna Lisiecka
Katarzyna Lisiecka
Damian JanczakDamian Janczak
Damian Janczak
The article discusses the effect of modification of the plasticizing system of a single-screw extruder on selected physicochemical properties of rapeseed straw and buckwheat straw. A TS-45 single-screw extruder (ZMCh Metalchem, Gliwice, Poland) with an L/D = 12 plasticizing system was used for the process. The shredded straws were moistened to four moisture levels: 20, 25, 30 and 35% dry matter. Three different rotational speeds of the extruder screw were applied for the test cycle: 70, 90 and 110 rpm. The following characteristics were determined for the extrusion-cooking process: efficiency and specific mechanical energy. Selected physical properties were determined for the extrudates obtained in the process: water absorption index (WAI), water solubility index (WSI), bulk density, and the efficiency of cumulative biogas and cumulative methane production expressed on dry mass, fresh mass, and fresh organic mass basis. It has been proved that the modification of the plasticizing system had a significant impact on the course of the process and the tested physicochemical properties. An important factor confirming the correctness of the modification is the increase in biogas efficiency. After modification, the highest yield of cumulative biogas from the fresh mass was 12.94% higher than in the sample processed before modification.