Biodegradable materials are used in the manufacture of packaging and compostable films and various types of medical products. They have demonstrated a large number of potential practical applications in medicine and particularly in the treatment of various cardiac, vascular, and orthopedic conditions in adults as well in children. In our research, the extrusion-cooking technique was applied to prepare thermoplastic starch (TPS), which was then utilized to obtain environmentally friendly starch-based films. Potato starch was the basic raw material exploited. Polyvinyl alcohol and keratin were used as functional additives in amounts from 0.5 to 3%, while 20% of glycerol was harnessed as a plasticizer. The processing of the thermoplastic starch employed a single screw extruder-cooker with an L/D ratio of 16. The film blowing process was carried out using a film-blowing laboratory line with L/D = 36. FTIR Spectroscopy was applied for the assignment of the prominent functional groups. The results showed that the processing efficiency of thermoplastic starch with functional additives varied depending on the level of polyvinyl alcohol and keratin addition. Moreover, the FTIR data correlated with the changes in the physical properties of the tested films. The analysis of FTIR spectra revealed several changes in the intensity of bands originating from stretching vibrations characteristic of the –OH substituent. The changes observed depended on the presence/lack of the hydrogen bonding occurring upon interactions between the starch molecules and the various additives used. In addition, notable changes were observed in bands assigned to glycoside bonds in the starch.
The aim of the study is to determine the energy consumption of the extrusion-cooking process of corn straw under various conditions (screw speed, moisture content), water absorption measurements and water solubility indices as well as biogas efficiency evaluation. The extrusion-cooking of corn straw was carried out using a single screw extruder with L/D = 16:1 at various rotational screw speeds (70, 90, and 110 rpm) and with various initial moisture content of raw material (25 and 40%). Prior to the process, the moisture content of the raw material was measured, and next, it was moistened to 25 and 40% of dry matter. For example, at 70 rpm extruder screw speed, the temperature range was 126–150 °C. Energy consumption of straw pretreatment through extrusion-cooking was assessed in order to evaluate the possibility of using the process in an agricultural biogas plant. Biogas and methane efficiency of substrates after extrusion was tested in a laboratory scale biogas plant and expressed as a volume of cumulative methane production for fresh matter, dry matter, and dry organic matter. Pretreated corn straw moistened to 25% and processed at 110 rpm during the extrusion-cooking processing produced the most advantageous effect for methane and biogas production (51.63%) efficiency as compared to corn straw without pretreatment (49.57%). Rotational speed of the extruder screw influenced biogas and methane production. With both dry matter and dry organic matter, the increase of rotational speed of the extruder screw improved the production of cumulated biogas and methane. Pretreatment of corn straw has a positive effect on the acquisition of cumulated methane (226.3 Nm3 Mg−1 for fresh matter, 243.99 Nm3 Mg−1 for dry matter, and 254.83 Nm3 Mg−1 for dry organic matter). Preliminary analysis of infrared spectra revealed changes in the samples also at the molecular level, thus opening up the possibility of identifying marker bands that account for specific degradation changes.
Biodegradable materials are used in the manufacture of packaging and compostable films and various types of medical products. These have demonstrated high potential in medical applications: cardiac, vascular and orthopaedic conditions in adults as well in children. In our research, the extrusion-cooking technique was used to obtain environmentally friendly loose-fill foams as packaging. Potato starch was the basic raw material. Polyvinyl alcohol was used as an additive in the amount of 1%, 2% and 3% to replace starch. The components were mixed and moistened with water to various initial moisture contents of the blend (17%, 18% and 19%). The processing of starch foams employed the TS-45 single screw extruder-cooker (Gliwice, Poland) with the L/D ratio of 12. The foams were processed with various screw speeds (100 and 130 rpm) and with two types of forming dies (circular and ring die). The extrusion-cooking process efficiency (kg h−1) and the energy consumption (kWh kg−1) during the processing were also measured. The results showed that the processing efficiency of potato starch foams varied depending on the level of polyvinyl alcohol, the shape of the forming die and the screw speed applied. The analysis of energy consumption, mechanical properties and FTIR analyses demonstrated that the type of the forming die and the initial moisture level had the most significant impact on specific energy demands during the processing of potato starch-based foams.
Biogas production from lignocellulosic biomass, such as wheat and rapeseed straw, is an essential strategy for sustainable energy generation. However, the efficiency of anaerobic digestion depends on the physical characteristics of the substrate, particularly the particle size, which influences microbial accessibility and biogas yield. This study aims to optimize straw particle size for enhanced methane production by evaluating different fractionation levels. The straw was processed using a hammer mill and separated into three size fractions (2.4 mm, 1 mm) alongside non-separated and finely ground (2 mm) samples. The chemical composition was analyzed using X-ray fluorescence (XRF), and key parameters such as pH, dry matter (DM), and organic dry matter (ODM) were assessed. The results indicated that rapeseed straw had lower pH (6.05) and DM than wheat straw (7.01). Biogas yield analysis demonstrated that methane production varied with particle size. For rapeseed straw, non-separated samples achieved the highest methane yield (132.87 m3 Mg⁻1), whereas for wheat straw, methane yield decreased with increased fragmentation, with the highest yield observed for non-separated material (206.65 m3 Mg⁻1). The carbon-to-nitrogen (C/N) ratio was highest in rapeseed straw (153.82), potentially limiting microbial activity, while finer fractions had more balanced ratios. These findings highlight the importance of mechanical pretreatment in optimizing biogas production and provide insights into improving the efficiency of straw-based anaerobic digestion systems.
This study investigates the impact of different corn silage preparation methods, namely the traditional and Shredlage methods, on digestibility and biogas yield in anaerobic digestion and its nutritional value—the first complex study of its kind. Key parameters of both silage types were analyzed, including chemical composition, fiber content, and elemental makeup. Methane and biogas production were assessed under standardized fermentation conditions. The results showed that the Shredlage method, characterized by more intensive chopping, led to higher biogas and methane yields per unit of organic dry matter compared to traditional silage. This improvement is attributed to enhanced digestibility due to the lower content of neutral detergent fiber (NDF), acid detergent fiber (ADF), and crude fiber in Shredlage. An elemental analysis revealed slight differences in carbon-to-nitrogen (C/N) ratios, with both silages showing values suitable for efficient fermentation. Despite minor variations in mineral content, Shredlage demonstrated greater efficiency in biogas production, particularly for rapid fermentation processes. The findings underscore the importance of silage preparation techniques in optimizing biogas yield and suggest Shredlage as a superior option for enhancing energy recovery in biogas plants. Future work should explore the economic trade-offs and scalability of these methods.
1 January 2016 in Journal of Ecological Engineering
The paper presents the results of a study on the water absorption capacity and solubility of biodegradable starch foams produced with single-screw extruder TS-45 with L/D=12. Two different moulding dies were used: one with a circular hole with the diameter of 3 mm and one with a ring hole with...