Designing new catalysts that can efficiently utilize multiple energy sources can contribute to solving the current challenges of environmental remediation and increasing energy demands. In this work, we fabricated single-crystalline BiFeO3 (BFO) nanosheets and nanowires that can successfully harness visible light and mechanical vibrations and utilize them for degradation of organic pollutants. Under visible light both BFO nanostructures displayed a relatively slow reaction rate. However, under piezocatalysis both nanosheets and nanowires exhibited higher reaction rates in comparison with photocatalytic degradation. When both solar light and mechanical vibrations were used simultaneously, the reaction rates were elevated even further, with the BFO nanowires degrading 97% of RhB dye within 1 hr (k-value 0.058 min-1). The enhanced degradation under mechanical vibrations can be attributed to the promotion of charge separation caused by the internal piezoelectric field of BFO. BFO nanowires also exhibited good reusability and versatility toward degrading four different organic pollutants.
Theoretical and applied studies of tungsten alloys with iron group metals (Me-W) are being carried out worldwide, in the light of their versatile applications. The aim of this paper is to provide an...
Conventional photocatalytic micromotors are limited to the use of specific wavelengths of light due to their narrow light absorption spectrum, which limits their effectiveness for applications in biomedicine and environmental remediation. We present a multiwavelength light-responsive Janus micromotor consisting of a black TiO2 microsphere asymmetrically coated with a thin Au layer. The black TiO2 microspheres exhibit absorption ranges between 300 and 800 nm. The Janus micromotors are propelled by light, both in H2O2 solutions and in pure H2O over a broad range of wavelengths including UV, blue, cyan, green, and red light. An analysis of the particles’ motion shows that the motor speed decreases with increasing wavelength, which has not been previously realized. A significant increase in motor speed is observed when exploiting the entire visible light spectrum (>400 nm), suggesting a potential use of solar energy, which contains a great portion of visible light. Finally, stop–go motion is also demonstrated by controlling the visible light illumination, a necessary feature for the steerability of micro- and nanomachines.
18 March 2015 in ACS Applied Materials & Interfaces