The suitability of GdBaCo2O5+δ as a cathode material for intermediate temperature solid oxide fuel cells has been evaluated. The 18O/16O isotope exchange depth profile (IEDP) method has been used to obtain the oxygen surface exchange and oxygen tracer diffusion coefficients yielding optimum values for applicability in fuel cells (k* = 2.8 × 10−7 cm s−1 and D* = 4.8 × 10−10 cm2 s−1 at 575 °C) especially in terms of low activation energies (EAk = 0.81(4) and EAD = 0.60(4) eV). The same material has been characterized electrically as a part of a symmetrical electrochemical system (GdBaCo2O5+δ/Ce0.9Gd0.1O2−x/GdBaCo2O5+δ), by means of impedance spectroscopy measurements, corroborating an excellent performance in the classical intermediate temperature range for solid oxide fuel cells (500–700 °C). An area specific resistance (electrode–electrolyte interface) of 0.25 Ω cm2 at 625 °C was achieved for a cell processing temperature of 975 °C. Finally, layered perovskites are presented as a promising new family of materials for cathode use in solid oxide fuel cells at low temperatures.
Dissipated power in metal oxide nanowires often causes important self-heating effects and as a result, undesired aging and failure of the devices. Nevertheless, this effect can be used to optimize the sensing conditions for the detection of various gaseous species, avoiding the requirement of external heaters. In this letter, the sensing capabilities of self-heated individual nanowires toward are presented. These proof-of-concept systems exhibited responses nearly identical to those obtained with integrated microheaters, demonstrating the feasibility of taking advantage of self-heating in nanowires to develop ultralow power consumption integrated devices.
The responses of individual ZnO nanowires to UV light demonstrate that the persistent photoconductivity (PPC) state is directly related to the electron-hole separation near the surface. Our results demonstrate that the electrical transport in these nanomaterials is influenced by the surface in two different ways. On the one hand, the effective mobility and the density of free carriers are determined by recombination mechanisms assisted by the oxidizing molecules in air. This phenomenon can also be blocked by surface passivation. On the other hand, the surface built-in potential separates the photogenerated electron-hole pairs and accumulates holes at the surface. After illumination, the charge separation makes the electron-hole recombination difficult and originates PPC. This effect is quickly reverted after increasing either the probing current (self-heating by Joule dissipation) or the oxygen content in air (favouring the surface recombination mechanisms). The model for PPC in individual nanowires presented here illustrates the intrinsic potential of metal oxide nanowires to develop optoelectronic devices or optochemical sensors with better and new performances.