It is suggested that the structure of clays may be distinguished simply as either ‘sedimentation’ or ‘post-sedimentation’, depending on whether gross yield in one-dimensional compression in void ratio-vertical effective stress plane occurs on the original sedimentation compression curve or to the right of this curve. A behavioural framework is proposed for clays having either of these structures, the magnitude of the strength sensitivity S_t when consolidated to the gross yield state (in compression) quantifying the effects of structure. The behaviour of natural clay consolidated to stress states pre-gross yield is related to the undisturbed clay sensitivity S_t; the gross yield curve is generally of arch shape, its size relative to that of the reconstituted clay depending on this sensitivity. Clays having S_t > 1 consolidated to stresses beyond gross yield exhibit post-gross yield behaviour in which values of sensitivity reduce with increasing post-yield strain. It is found that following normalization for composition (using the stress ratio at critical state M), volume (using p*_e) and structure (using the sensitivity at gross yield S_t ), many different clays have the same gross yield curve. A basically frictional linear flow rule is found to operate from small or medium to large strains for both natural and reconstituted clays.

Results are presented of an extensive laboratory and field investigation of a Pleistocene stiff clay in its natural and reconstituted states, including constant rate of strain oedometer and triaxial tests over a wide stress range, scanning electron microscopy and chemical micro-analysis. The relationships between the structure of the clay, its geological history and its mechanical response are demonstrated. The structure of the clay is strongly influenced by bonding, apparently largely due to a film of amorphous calcite which developed in situ at the end of normal consolidation. The effects of structure on the stiffness of the clay are identified, with sensitivity as the parameter quantifying the mechanical effects of structure. A frictional flow rule is found generally to be applicable over a wide strain range, including yield, even when strong bonding is present, although its form is influenced by structure. A new normalization shows that the gross yield surface is isotropically hardening in terms of both volume and structural change. L'article présente les résultats de recherches approfondies, en laboratoire et sur le terrain, sur une argile raide du Pléistocène à l'état naturel et reconstituée, y compris des essais oedométriques et triaxiaux à taux de contrainte constant, sur un large éventail de contraintes, ainsi que les résultats de travaux de microscopie électronique à balayage et de micro-analyse chimique. Les auteurs montrent les rapports entre la structure de l'argile, son histoire géologique et sa réaction mécanique. La structure de l'argile est fortement influencée par l'adhérence, qui semble en grande partie due à une pellicule de calcite amorphe qui s'est formée sur place à la fin de la consolidation normale. Les auteurs identifient les effets de la structure sur la rigidité de l'argile, la sensibilité étant le paramètre qui quantifie les effets mécaniques de la structure. On constate qu'un écoulement de frottement s'applique généralement à un large éventail de contraintes, y compris à la limite d'élasticité, même quand l'adhérence est forte, bien que sa forme soit influencée par la structure. Une nouvelle normalisation montre que la surface brute d'écoulement subit un durcissement isotrope tant en volume qu'en changement structural.

The behaviour of natural and artificial slopes is controlled by their thermo-hydro-mechanical conditions and by soil–vegetation–atmosphere interaction. Porewater pressure changes within a slope related to variable meteorological settings have been shown to be able to induce soil erosion, shrinkage–swelling and cracking, thus leading to an overall decrease of the available soil strength with depth and, ultimately, to a progressive slope collapse. In terms of numerical modelling, the stability analysis of partially saturated slopes is a complex problem and a wide range of approaches from simple limit equilibrium solutions to advanced numerical analyses have been proposed in the literature. The more advanced approaches, although more rigorous, require input data such as the soil water retention curve and the hydraulic conductivity function, which are difficult to obtain in some cases. The quantification of the effects of future climate scenarios represents an additional challenge in forecasting slope–atmosphere interaction processes. This paper presents a review of real and ideal case histories regarding the numerical analysis of natural and artificial slopes subjected to different types of climatic perturbations. The limits and benefits of the different numerical approaches adopted are discussed and some general modelling recommendations are addressed.

The paper discusses the geological history, intrinsic properties, structural features and mechanical behaviour of three differently fissured clays outcropping within the Apennine chain in southern Italy. Based on a large experimental database, the mechanical behaviour of the clays is investigated in the light of their different fissuring features, which have been distinguished and characterised by means of a new chart. The study assumed the soil to be a continuum, despite the different fissuring features of the clay fabric. Therefore laboratory tests were carried out on both natural and reconstituted clay samples, and the results were compared with those recognised in the literature to be typical of unfissured sensitive clays. Based on these comparisons, a behavioural framework is proposed for clays possessing certain fissure structures. The results of the analysis show that the mini- to mesostructure of clays of fissuring intensity I5–I6 can be modelled as part of the structure variable controlling the clay behaviour. Where the structure variable refers solely to the micro scale for unfissured homogeneous clays, for fissured clays I5–I6 it spans from the micro to the meso scale. As for the microstructure of unfissured clays, this micro- to mesostructure influences the soil response as an internal state variable in addition to specific volume in controlling the mechanical response. In particular, it appears that for clays of fissuring intensity I5–I6, structure is detrimental to strength, so that the material is even weaker than the reconstituted clay.

The revitalisation of the global economy after the Covid-19 era presents environmental geotechnics with the opportunity to reinforce the need for a change in paradigm towards a green, circular economy and to promote aggressively the use and development of sustainable technologies and management practices. This paper aims to assist in this effort by concentrating on several thematic areas where sustainability solutions and future improvements are sought. These include the re-entry of construction and demolition of wastes, excavated materials, industrial wastes and marine sediments into the production cycle and the reuse of existing foundations. Despite the recent trend in advanced countries towards recycling and waste-to-energy thermal treatment, landfills still constitute the most common municipal solid waste management practice, especially in low-and-middle-income countries, and technological solutions to improve their environmental footprint are hereby presented. At the same time, remediation solutions are required to address the multitude of contaminated sites worldwide. Advanced developments that incorporate environmental, economic and social dimensions are expounded by the authors, together with sustainable ground improvement solutions for infrastructure projects conducted in soft and weak soils. The topic of thermo-active geostructures concludes this paper, where, apart from their infrastructure utility, these structures have the potential to contribute to the renewable energy source.