The scale difference between the real flight vehicle and the experimental model results in the Reynolds number effect, which makes it unreliable to predict the aerodynamic characteristics of flight vehicles by wind tunnel testing. To understand the mechanism of Reynolds number effects on the aerodynamic characteristics of the supercritical wing that is commonly used in transport aircraft in more detail, surface pressure wind tunnel tests of a transport aircraft reference model with a wing-body configuration were conducted in the European Transonic Windtunnel (ETW) at different Reynolds numbers. There are 495 pressure taps in total equipped on the surface of the test model with the Mach numbers ranging from 0.6 to 0.86 and Reynolds number varying from 3.3 × 10⁶ to 35 × 10⁶. In addition, an in-house developed CFD tool that has been validated by extensive experimental data was used to correct the wing deformation effect of the test model and achieve detailed flow structures. The results show that the Reynolds number has a significant impact on the boundary layer displacement thickness, surface pressure distribution, shock wave position, and overall aerodynamic force coefficients of the transport aircraft in the presence of shock wave and the induced boundary layer separation. The wind tunnel data combined with flow fields achieved from CFD show that the essence of the Reynolds number effect on the aerodynamic characteristics of transport aircraft is the difference of boundary layer development, shock wave/boundary layer interaction, and induced flow separation at different Reynolds numbers.

A special V-shaped support for blended wing body aircraft was designed and applied in high-speed wind tunnel tests. In order to reduce the support interference and explore the design criteria of the V-shaped support, interference characteristics and geometric parameter effects of V-shaped support on blended wing body aircraft were numerically studied. According to the numerical results, the corresponding dummy V-shaped supports were designed and manufactured, and verification tests was conducted in a 2.4 m × 2.4 m transonic wind tunnel. The test results were in good agreement with the numerical simulation. Results indicated that pitching moment of blended wing body aircraft is quite sensitive to the V-shaped support geometric parameters, and the influence of the inflection angle is the most serious. To minimize the pitching moment interference, the straight-section diameter and inflection angle should be increased while the straight-section length should be shortened. The results could be used to design special V-shaped support for blended wing body aircraft in wind tunnel tests, reduce support interference, and improve the accuracy of test results.

This study investigates the effect of Reynolds number on unsteady buffet characteristics of the OAT15A supercritical airfoil under transonic conditions (Ma = 0.73, AOA = 3.5°) using DDES based on the SST k-ω turbulence model coupled with the γ-Reθ transition model. Results show that, compared with fully turbulent conditions, the free-transition cases exhibit a more downstream shock position and higher lift. Under fully turbulent conditions, higher Reynolds numbers drive the shock downstream and enhance its stability. Under free-transition conditions, the shock moves downstream at low Reynolds numbers but shifts upstream at high Reynolds numbers due to changes in the transition location. During the unsteady buffet cycle at low Reynolds numbers, the lift increases as the shock moves downstream and the separation region shrinks. The lift reaches its maximum when the separation is minimal, corresponding to a quiet flow state with weak acoustic emission. As the lift decreases, a large separation region forms behind the shock, forcing the shock upstream and reducing the lift to its minimum. At high Reynolds numbers, the buffet cycle changes: the shock becomes more stable; trailing-edge vortex shedding intensifies; lift oscillation amplitude decreases; and buffet frequency increases.

In this paper, we concentrate on the propagation dynamics of stochastic reaction–diffusion equations, including the existence of travelling wave solution and asymptotic wave speed. Based on the stochastic Feynman–Kac formula and comparison principle, the boundedness of the solution of stochastic reaction–diffusion equations can be obtained so that we can construct a sup-solution and a sub-solution to estimate the upper bound and the lower bound of wave speed.

As an important aerodynamic configuration of the new-generation UAV, the dorsal S-shaped inlet’s performance is affected by the complex coupling of inflow conditions and the boundary layer ingestion effect. To investigate the influence mechanisms of these factors on inlet performance, CFD based on the scale-adaptive simulation (SAS) turbulence model is used to systematically analyze the flow field and performance of a UAV dorsal S-shaped inlet within a typical flight envelope. It is found that with increasing Mach number (0.6–0.9), the exit total pressure recovery decreases significantly, while the circumferential distortion coefficient almost doubles. As the angle of attack varies from −10° to 10°, a slight decrease in total pressure recovery is observed, but distortion improves due to a relatively stable separation region. Changes in sideslip angle have minimal impact on overall performance but notably alter the symmetry of the vortex system, resulting in a decrease in distortion coefficient. Additionally, at a specific Mach number, back pressure correlates positively with inlet performance. The increase in back pressure can effectively inhibit the flow separation and enhance the total pressure recovery, while the distortion coefficient decreases. The research results provide an important theoretical basis for the design optimization of the new-generation UAV.

This study proposes a computational fluid dynamics and computational structure dynamics (CFD/CSD) coupled method for calculating the buffet response of a variant tail wing. The large-scale separated flow in the buffet is simulated by the detached vortex approach, vibration deformation of the tail wing is solved by the dynamic mesh generation technique, and structural modeling is based on the mode method. The aerodynamic elastic coupling is calculated through the cyclic iteration of aerodynamics and the structural solution in the time domain. We verify the correctness of the proposed method through a typical delta wing calculation case, further simulate the buffet response of a variant tail wing in maneuver state, and finally realize buffet mitigation using an active excitation method. Overall, this study can provide an important reference for the design of variant-tailed aircraft.