The urgent demand for alternative energy sources has been sparked by the tremendous burden on fossil fuels and the resulting acute energy crisis and climate change issues. Lignocellulosic biomass is a copious renewable and alternative bioresource for the generation of energy fuels and biochemicals in biorefineries. Different pretreatment strategies have been established to overcome biomass recalcitrance and face technological challenges, such as high energy consumption and operational costs and environmental hazards, among many. Biological pretreatment using microbial enzymes is an environmentally benign and low-cost method that holds promising features in the effective pretreatment of lignocellulosic biomass. Due to their versatility and eco-friendliness, cellulases, hemicellulases, and ligninolytic enzymes have been recognized as “green biocatalysts” with a myriad of industrial applications. The current review provides a detailed description of different types of lignocellulolytic enzymes, their mode of action, and their prospective applications in the valorization of lignocellulosic biomass. Solid state fermentation holds great promise in the microbial production of lignocellulolytic enzymes owing to its energy efficient, environment friendly, and higher product yielding features utilizing the lignocellulosic feedstocks. The recent trends in the application of enzyme immobilization strategies for improved enzymatic catalysis have been discussed. The major bottlenecks in the bioprocessing of lignocellulosic biomass using microbial enzymes and future prospects have also been summarized.

The effects of high hydrostatic pressure (HHP) treatments on histamine-forming bacteria (HFB) Morganella morganii and Photobacterium phosphoreum in phosphate buffer and tuna meat slurry were investigated using viability counting and scanning electron microscopy. The first-order model fits the destruction kinetics of high pressure on M. morganii and P. phosphoreum during the pressure hold period. The D-values of M. morganii (200 to 600 MPa) and P. phosphoreum (100 to 400 MPa) in phosphate buffer ranged from 16.4 to 0.08 min and 26.4 to 0.19 min, respectively, whereas those in tuna meat slurry ranged from 51.0 to 0.09 min and 71.6 to 0.19 min, respectively. M. morganii had higher D-values than P. phosphoreum at the same pressure, indicating it was more resistant to HHP treatment. HFB had a higher D-value in tuna meat slurry compared with that in phosphate buffer, indicating that the HFB were more resistant to pressure in tuna meat slurry. The Zp values (pressure range that results in a 10-fold change in D-value) of M. morganii and P. phosphoreum were 162 and 140 MPa in phosphate buffer and 153 and 105 MPa in tuna meat slurry, respectively. Damage to the cell wall and cell membrane by HHP treatments can be observed by scanning electron microscopy. To our knowledge, this is the first report to demonstrate that HHP can be applied to inactivate the HFB M. morganii and P. phosphoreum by inducing morphological changes in the cells. M. morganii with higher D-values was more resistant than P. phosphoreum at the same HHP. HFB with higher D-values were more resistant in fish slurry than in phosphate buffer. P. phosphoreum with lower Zp values was more sensitive to changes in HHP than M. morganii. SEM shows that HHP causes cell wall and membrane damage in HFB.

The inactivation and damage of histamine-forming bacteria (HFB), Enterobacter aerogenes and Staphylococcus capitis, in a 0.1 M potassium phosphate buffer (pH 6.8) and marlin meat slurry by high hydrostatic pressure (HHP) treatments were studied using viability measurement and scanning electron microscopy (SEM). HHP treatments showed first order destruction kinetics to E. aerogenes and S. capitis during the pressure holding period. HFB in marlin meat slurry had higher D values and were more resistant to HHP treatments than in phosphate buffer. In phosphate buffer, E. aerogenes had higher D values than S. capitis at >380 MPa of pressure, whereas the reverse trend was noticed at lower pressures (<380 MPa). In marlin meat slurry, S. capitis had a higher D value than E. aerogenes at the same treatment pressure, indicating that S. capitis was more resistant to HHP treatment. To our knowledge, this is the first report to demonstrate that HHP can be used to inactivate HFB, E. aerogenes, and S. capitis, by causing disruption to bacterial cell membrane and cell wall as demonstrated by SEM micrographs.

In the current investigation, a native crude fucoidan (Ex) was extracted from Sargassum crispifolium, pretreated by single-screw extrusion, and two degraded fucoidans, i.e., ExAh (degradation of Ex by ascorbic acid) and ExHp (degradation of Ex by hydrogen peroxide), were obtained. The extrusion pretreatment increased the extraction yield of fucoidan by approximately 1.73-fold as compared to the non-extruded sample. Among Ex, ExAh, and ExHp, their molecular weight and chemical compositions varied, but the structural features were similar. ExHp possessed the greatest antioxidant activities among the extracted fucoidans. According to the outcome, ExAh exhibited the maximum immune promoting effects via enhanced NO, TNF-α, IL-1β, IL-6, and IL-10 secretion. Thus, both ExHp and ExAh may potentially be used as an effective antioxidant and as immunostimulant agents, which could be of great value in the development of food and nutraceutical products.

The objective of this work was to study the application of high-pressure processing (HPP) on the quality change and extending the shelf-life of yellowfin tuna (Thunnus albacares) stored at low temperature. The effects of HPP treatments (200, 300, 400, 500, and 600 MPa for 5 min) on microbiological and chemical quality, and histamine content of tuna flesh stored at 4°C and 15°C, respectively, were evaluated. With the increased pressure, the levels of aerobic plate count (APC) and coliform in tuna flesh significantly decreased. It was also found that the L* (lightness), b* (yellowness), W (whiteness), ΔE (color difference), and texture (hardness, cohesiveness and chewiness) of fish flesh increased significantly with the increased pressure; however, a* (redness) value decreased. Furthermore, HPP with a pressure of >300 MPa on tuna samples significantly delayed the increase in APC during storage at 4°C or 15°C, respectively, while the samples pressurized more than 200 MPa had significantly lower levels of total volatile basic nitrogen (TVBN) and histamine compared to the control samples during storage. The results indicated that tuna flesh pressurized at least 300 MPa for 5 min could be a technique employed to extend the shelf-life to 1 d at 15°C and 6 d at 4°C, based on the APC limit standard (6.47 log CFU/g). In this study, HPP can be seen as a potential useful technique to preserve tuna flesh due to its ability to reduce bacterial load and retard TVBN and histamine production.

The microwave-assisted induction heating (MAIH) system provides comprehensive heating by combining microwave heating (with 1300 W of power and 2450 MHz of frequency) in the top part and induction heating (with 1800 W of power) in the bottom part. In this study, fresh white shrimps were placed in a sealed crystallized polyethylene terephthalate (CPET) container and heated in the MAIH system at two temperatures (130 and 90 °C) from 60 to 120 s. Afterwards, the shrimp samples were rapidly cooled, and the changes in the shrimp quality, including the appearance, cook loss, aerobic plate count (APC), color values, and texture, during the heating process were analyzed. The results demonstrate that longer heating times decrease the APC levels, but increase the cook loss, color values (lightness, redness, and whiteness), and texture (hardness, cohesiveness and chewiness) of the white shrimp samples. In particular, the white shrimp is fully cooked and gains a completely red appearance, along with no APC detected after heating in the MAIH system at 130 °C for at least 80 s or at 90 °C for at least 100 s. In summary, to achieve a good appearance, no APC detected, and low cook loss, the following heating conditions are recommended for cooking white shrimp in the MAIH system: heating at 130 °C for 80 s or at 90 °C for 100 s. This novel MAIH technology allows food to be heated and sterilized after being packed, thereby eliminating the post-pollution issue. To the best of the authors’ knowledge, this is the first study to evaluate the use of MAIH in the application of food processing.