Background: Attaining an effective mucosal attachment to the transmucosal part of the implant could protect the peri-implant bone. Aim: To evaluate if chair side surface treatments (plasma of Argon and ultraviolet light) may affect fibroblast adhesion on different titanium surfaces designed for soft tissue healing. Methods: Grade 5 titanium discs with four different surface topographies were subdivided into 3 groups: argon-plasma; ultraviolet light, and no treatment. Cell morphology and adhesion tests were performed at 20 min, 24 h, and 72 h. Results: Qualitative observation of the surfaces performed at the SEM was in accordance with the anticipated features. Roughness values ranged from smooth (MAC Sa = 0.2) to very rough (XA Sa = 21). At 20 min, all the untreated surfaces presented hemispherical cells with reduced filopodia, while the cells on treated samples were more spread with broad lamellipodia. However, these differences in spreading behavior disappeared at 24 h and 72 h. Argon-plasma, but not UV, significantly increased the number of fibroblasts independently of the surface type but only at 20 min. Statistically, there was no surface in combination with a treatment that favored a greater cellular adhesion. Conclusions: Data showed potential biological benefits of treating implant abutment surfaces with the plasma of argon in relation to early-stage cell adhesion.

Telomerase reverse transcriptase (TERT) is the catalytic subunit of telomerase holoenzyme, which adds telomeric DNA repeats on chromosome ends to counteract telomere shortening. In addition, there is evidence of TERT non-canonical functions, among which is an antioxidant role. In order to better investigate this role, we tested the response to X-rays and H₂O₂ treatment in hTERT-overexpressing human fibroblasts (HF-TERT). We observed in HF-TERT a reduced induction of reactive oxygen species and an increased expression of the proteins involved in the antioxidant defense. Therefore, we also tested a possible role of TERT inside mitochondria. We confirmed TERT mitochondrial localization, which increases after oxidative stress (OS) induced by H₂O₂ treatment. We next evaluated some mitochondrial markers. The basal mitochondria quantity appeared reduced in HF-TERT compared to normal fibroblasts and an additional reduction was observed after OS; nevertheless, the mitochondrial membrane potential and morphology were better conserved in HF-TERT. Our results suggest a protective function of TERT against OS, also preserving mitochondrial functionality.

Lemnaceae taxonomy is challenged by the particular morphology of these tiny free-floating angiosperms. Although molecular taxonomy has helped clarify the phylogenetic history of this family, some inconsistency with morphological data leads to frequent misclassifications in the genus Lemna. Recently, the finding that Lemna japonica is an interspecific hybrid between Lemna minor and Lemna turionifera provided a clear explanation for one such taxonomic question. Here we demonstrated that L. minor is also capable of hybridizing with Lemna gibba, generating a cryptic but widespread taxon in the Mediterranean area. The nothotaxon Lemna ×mediterranea is described and compared with clones of the putative parental species L. minor and L. gibba. Genetic analysis by nuclear and plastid markers, as well as genome size measurement, revealed that two different cytotypes, diploid and triploid, originated by at least two independent hybridization events. Despite high overall similarity, morphometrical, physiological, and biochemical analyses showed an intermediate position of L. ×mediterranea between its parental species in most qualitative and quantitative characters, and also separation of the two hybrid cytotypes by some criteria. These data provide evidence that hybridization and polyploidization, driving forces of terrestrial plant evolution, contribute to duckweed genetic diversity and may have shaped the phylogenetic history of these mainly asexual, aquatic plants.

The surface topography of dental implants plays an important role in cell-surface interaction promoting cell adhesion, proliferation and differentiation influencing osseointegration. A hydrophilic implant leads to the absorption of water molecules and subsequently promotes the adhesion of cells to the implant binding protein. Dried salts on the implant surfaces allow one to store the implant surfaces in a dry environment while preserving their hydrophilic characteristics. This process has been identified as “dry technology”. The aim of the present study is to describe from a micrometric and nanometric point of view the characteristics of this new bioactivated surface obtained using salts dried on the surface. Topographic analysis, energy-dispersive X-ray spectroscopy, and contact angle characterization were performed on the samples of a sandblasted and dual acid-etched surface (ABT), a nanosurface (Nano) deriving from the former but with the adding of salts air dried and a nanosurface with salts dissolved with distilled water (Nano H₂O). The analysis revealed promising results for nanostructured surfaces with increased wettability and a more articulated surface nanotopography than the traditional ABT surface. In conclusion, this study validates a new promising ultra-hydrophilic nano surface obtained by sandblasting, double acid etching and surface salt deposition using dry technology.

Many techniques are used today to study insect morphology, including light and electron microscopy. Most of them require to specifically prepare the sample, precluding its use for further investigation. In contrast, micro-CT allows a sample to be studied in a non-destructive and rapid process, even without specific treatments that might hinder the use of rare and hard-to-find species in nature. We used synchrotron radiation (SR) micro-CT and conventional micro-CT to prepare 3D reconstructions of Diptera, Coleoptera, and Hymenoptera species that had been processed with 4 common preparation procedures: critical-point drying, sputter-coating, resin embedding, and air-drying. Our results showed that it is possible to further utilize insect samples prepared with the aforementioned preparation techniques for the creation of 3D models. Specimens dried at the critical point showed the best results, allowing us to faithfully reconstruct both their external surface and their internal structures, while sputter-coated insects were the most troublesome for the 3D reconstruction procedure. Air-dried specimens were suitable for external morphological analyses, while anatomical investigation of soft internal organs was not possible due to their shrinking and collapsing. The sample included in resin allowed us to reconstruct and appreciate the external cuticle and the internal parts. In this work, we demonstrate that insect samples destined to different analyses can be used for new micro-CT studies, further deepening the possibility of state-of-the-art morphological analyses.

Microplastic pollution constitutes a serious environmental problem that requires more effective scientific research to describe its potential impacts on marine fauna. The interaction between microplastics and marine biota can have significant negative effects through the trophic chain, up to human health. To date, several steps forward have been made in our understanding of this phenomenon; however, large knowledge gaps still exist for several taxa and areas. In particular, the pattern of spatial and temporal distribution of microplastics in marine sediments and their interaction with benthic detritivore species still needs to be addressed. The Mediterranean Sea is one of the most impacted areas of the world, and its biota is deeply affected by microplastic pollution. To investigate the effects of the presence of microplastics in the sediments in this area, the echinoderm Holothuria tubulosa was chosen as a model species, and specimens were collected along the Salento peninsula in Apulia, Southern Italy. This peculiar geographic area extends between two ecoregions of the Mediterranean Sea, the Northern Ionian and the Southern Adriatic seas, characterized by peculiar and distinct currents and submarine topologies, resulting in a complex and dynamic ecosystem affected by seasonal fluctuations that make the Salento peninsula an interesting natural laboratory for predictions of future dispersion events on a wider scale. Microplastics were analyzed by investigating the gut contents of H. tubulosa individuals, and the SEM/EDX method was used to confirm the plastic material extracted. Results revealed microplastics in all the specimens analyzed and with a homogeneous pattern of distribution in time and some differences in space, suggesting that the presence of this anthropogenic material is constant throughout the year and its quantity is only slightly affected by the level of conservation and management strategies characterizing the sampling sites.