In this paper, to investigate mixed-mode I-II fracture behaviors, three different asymmetric notched semi-circular bending specimens (ANSCB) were designed by adjusting the angle and the distance between supporting rollers to conduct asymmetric three-point bending tests. Several aid technologies, including acoustic emission (AE), digital image correlation (DIC), crack propagation gauge (CPG), and scanning electron microscopy (SEM), was utilized to monitor and assess the fracture characteristic. Meanwhile, the fractal dimension of the fracture surface was assessed based on the reconstructed digital fracture surface. The results show that mixed-mode I-II ANSCB three-point bending fracture is a brittle failure with the characteristics of the main crack being rapidly transfixed and the bearing capacity decreasing sharply. Based on the DIC method, the whole fracture process consists of a nonlinear elastic stage, fracture process zone, crack initiation stage and crack propagation stage. The crack initiation is mainly caused by the tension-shear strain concentration at the pre-existing crack tip. At the microscale, the crack propagation path is always along the grain boundary where the resultant stress is weakest. According to the monitoring of the AE, it can be found that micro-tensile cracks are mainly responsible for the asymmetric three-point bending fracture. The data obtained by CPG suggest that the subcritical crack growth rate is positively correlated to the ultimate load. In addition, asymmetric loading leads to a coarser fracture surface, and thus a higher fractal dimension of the fracture surface. The current study can provide a better understanding of the mixed-mode I-II fracture behaviors of rock.

Different from the traditional goaf-side entry in the mining face, a goaf-side entry driving heading mining face can greatly alleviate the problem of mining and excavation replacement tension under the high-intensity mining condition of a single-wing mine, withstanding the whole process of the fracture, rotation, and sinking of key blocks in the overlying rock layer, which is extremely difficult to maintain. Taking the roadway layout in a single-wing mining face of a coal mine in Neimenggu, China as the research background, first, the stress environment and structural stability characteristics of a goaf-side entry driving heading mining face is qualitatively analyzed with the theoretical analysis method according to five different stages. Secondly, the distribution and evolution law of stress and displacement with a goaf-side entry driving heading mining face are systematically studied during the whole process of advanced mining, excavation, and mining with the numerical simulation method, and the reasonable width of the section of the coal pillar is determined to be 6.0 m. Finally, the deformation laws of a goaf-side entry driving heading mining face are revealed with the field survey method: (1) the stage of advanced mining—the function relation between the distance of the excavation and mining face and roadway displacement is approximately the logistic function; (2) the stage of goaf-side entry driving—the function relation between roadway displacement and the driving distance basically forms the exponential function. Based on the above research, the dynamic segmentation control principle of “high-resistance support, dynamic monitoring, sectional control, consolidation coal sides, and stable roof control” and the dynamic segmentation control technology of “section combined strong support of anchor, net, cable, and beam, narrow coal pillar grouting and reinforcement in key periods, strengthening support of the roof with a single pillar π steel beam”, and industrial tests are carried out on site. The monitoring results of the underground pressure show that the deformation failure of the goaf-side entry driving heading mining face is effectively controlled with the control principle and technology, the difficult problem of mining and excavation replacement tension is alleviated with the single-wing mine, and the useful reference and reference for the engineering practice under similar conditions are provided.

It is very extraordinary for the success of coal mine roadway grouting with the following factors of high early strength, good fluidity, and convenient pumping, but the existing grouting materials make it difficult to achieve the above characteristics at the same time. Therefore, a modified grouting material is developed, which is composed of two kinds of dry materials A and B, which are mixed with water and in equal amounts. The physical and mechanical properties of modified grouting materials under different ratios were tested by laboratory orthogonal test, and the optimal ratio of grouting materials and additives was obtained: (1) the water-cement ratio is 0.8 : 1; (2) base material: the mass ratio of cement, fly ash, bentonite, and water is 1 : 0.3 : 0.1 : 1.44; (3) admixture: the mass ratio of water reducer C, accelerator D, and retarder E is 1.5% : 0.05% : 0.3%. The basic properties of the modified grouting materials were studied from the aspects of slurry flow state, diffusion range, and grouting parameters by using the numerical simulation method, and the reinforcement mechanism of slurry to the broken surrounding rock properties of the roadway was revealed: (1) the grouting pressure is the main factor affecting the slurry diffusion radius; (2) the mechanical properties of the roadway surrounding rock are improved, the plastic zone and deformation of surrounding rock are reduced, and the active support function of the anchor and cable is enhanced through grouting reinforcement; (3) the control effect of the roadway is improved, and the balanced bearing with anchorage structure of the roadway surrounding rock is realized through grouting reinforcement. On this basis, the modified grouting material is applied to roadway repair and reinforcement engineering practice. The field monitoring data show that the production practices were guided by roadway repair and reinforcement technology with the modified grouting material, as the core of the roadway surrounding rock control effect is good, and the modified grouting material has a wide range of application prospects.

Taking the fully mechanized mining face (FMMF) through the abandoned roadway (AR) in a coal mine in Shanxi Province, China as the engineering background, the field investigation, theoretical analysis, numerical simulation and field test were comprehensively used to study the instability mechanism of the trend AR. The deformation and failure evolution of the trend AR roof were deduced into four stages: initial deformation, bending and separation deformation, fracture failure, and collapse destruction. The high span ratio proved to be the key factor affecting the stability of the trend AR, and the control principle of timely support and reduction of roof span should be followed for controlling the roof of trend AR. Comparing the traditional method through the trend AR with the perspectives of technological and economic benefits, the technology of filling and controlling the trend AR with the high water material over in the FMMF was proposed, and the effect of the filling body on the roof of the trend AR was revealed. The key parameters of the filling body were identified: the strength of the filling body is 1.0 MPa, and the water-cement ratio corresponding to the high-water material is 8:1. Based on this information, the process of the trend AR filling was designed systematically. Industrial tests show that during the FMMF through the trend AR, the roof was effectively supported by the filling body and the normal coal mining was not significantly affected, so the safe mining of coal resources was guaranteed.

The safe and efficient mining of deep coal resources is severely restricted by the dynamic disasters caused by high gas and high ground stress. Taking a deep mine in China as the research background, a mechanical model of the front supporting stress with the working face was constructed through theoretical calculations. Based on the limit equilibrium theory, the stress distribution in the plastic zone and the elastic zone of the lateral working face was derived; based on semi-infinite plane mechanics model, the floor vertical and horizontal stress distribution was deduced. Then, the roadway surrounding rock stress and displacement field distribution evolution characteristics were revealed through numerical simulation. On this basis, the reasonable floor gas drainage roadway (FGDR) layout was determined: internal staggered layout was used with FGDR, the vertical distance to the working face is 20 m, and the horizontal distance to the working face end is 15 m; the open-off cut of FGDR was arranged in an external staggered layout, the vertical distance to the working face is 20 m, and the horizontal distance to the open-off cut of the working face is 15 m. It is an important practical significance for the layout of FGDR, the control of surrounding rocks, and the improvement of gas drainage effects under similar conditions through the research results.

Based on the research background of large section roadway with top coal (LSRTC) in thick coal seam mining in Wangzhuang Coal Mine, Shanxi Province, China, catastrophe characteristics of the surrounding rock of the LSRTC were investigated and summarized. Based on the principle of damage mechanics, the critical size discriminant of the LSRTC was deduced, and the induction mechanism of section size effect and tectonic stress effect on the roadway surrounding rock disaster was revealed. Accordingly, the roadway surrounding rock control principle with the basic idea of “stabilizing and controlling top coal, reconstructing the coal wall, and limiting floor heave” was put forward, and the roadway surrounding rock stability control countermeasures with the core technology of “strong pressure support for roof + grouting reinforcement for two sides + bolt barrier for floor angle” were developed, which solved the surrounding rock control problem of the LSRTC under the action of tectonic stress and provided a useful reference for the difficult problem of roadway surrounding rock control under similar conditions.