The robust determination of the threshold against fatigue crack propagation is of paramount importance in fracture mechanics based fatigue assessment procedures. The standards ASTM E647 and ISO 12108 introduce operational definitions of based on the crack propagation rate and suggest linear fits of logarithmic – test data to calculate . Since these fits typically suffer from a poor representation of the actual curvature of the crack propagation curve, a method for evaluating using a nonlinear function is proposed. It is shown that the proposed method reduces the artificial conservativeness induced by the evaluation method as well as the susceptibility to scatter in test data and the influence of test data density.
For the generation of fatigue curves by means of fatigue tests, an ultimate number of cycles must be chosen. This ultimate number of cycles also limits the permissible range of the fatigue curve for the design of components. This introduces extremely high costs for testing components that are to be used in the Very High Cycle Fatigue regime. In this paper, we examine the influence of the ultimate number of cycles of fatigue tests on lifetime prediction for compression springs manufactured from VDSiCr class spring wire. For this purpose, we propose a new kind of experiment, the Artificial Censoring Experiment (ACE). We show that ACEs may be used to permissibly extrapolate the results of fatigue tests on compression springs by ensuring that a batch-specific minimum ultimate number of cycles has been exceeded in testing. If the minimum ultimate number of cycles has not been exceeded, extrapolation is inadmissible. Extrapolated results may be highly non-conservative, especially for models assuming a pronounced fatigue limit.
In this study, we investigate the influence of control type and strain rate on the lifetime of specimens manufactured from 50CrMo4. This influence is described by a strain rate dependent method that uses cyclic stress strain curves to correct displacement-controlled cyclic test results. The objective of this correction is to eliminate the stress related differences between displacement-controlled cyclic test results and force-controlled cyclic test results. The method is applied to the results of ultrasonic fatigue tests of six different combinations of heat treatment, specimen geometry (notch factor) and atmosphere. In a statistical analysis, the corrected results show an improved agreement with test results obtained on conventional fatigue testing equipment with similar specimens: the standard deviation in combined data sets is significantly reduced (p = 4.1%). We discuss the literature on intrinsic and extrinsic strain rate effects in carbon steels.
14 November 2019 in Materialwissenschaft und Werkstofftechnik
In this paper, a novel algorithm for the determination of Walker damage in loaded disc springs is presented. The algorithm takes a 3D-scan of a disc spring, measured residual stresses, material parameters, and spring loads as inputs. It outputs a distribution of Walker damage over the surface area of the input disc spring. As the algorithm allows a fully automated determination of the Walker damage, it can be used by disc spring manufacturers to reduce the working time spent on this task by specialized engineers significantly. Compared to spreadsheet applications using analytical formulas and finite element models using idealized geometry, this approach offers a superior description of the stress states in disc springs.