The high-strength bolt shear connector in prefabricated concrete slab has advantages in applications as it reduces time during the construction of steel-concrete composite building structures and bridges. In this research, an innovative and advanced bolt shear connector in steel-concrete composite structures is proposed. To investigate the fundamental mechanical behavior and the damage form, 22 static push-off tests were conducted with consideration of different bolt dimensions, the reserved hole constraint condition, and the dimension of slab holes. A finite element (FE) model was established and verified by using test results, and then the model was utilized to investigate the influence of concrete strength, bolt dimension, yield strength, bolt pretension, as well as length-to-diameter ratio of high strength bolts on the performances of shear connectors. On the basis of FE simulation and test results, new design formulas for the calculation of shear resistance behavior were proposed, and comparisons were made with current standards, including AISC, EN 1994-1-1, GB 50017-2017, and relevant references, to check the calculation efficiency. It is confirmed that the proposed equation is in better agreement with the experimental results.

To enhance the properties of SBS and crumb rubber-modified asphalts, four different amounts (5%, 10%, 15%, and 20%) of castor oil were added to crumb rubber-modified asphalts to mitigate the adverse effects of high levels of fine crumb rubber particles on the aging resistance of SBS and crumb rubber-modified asphalt. Initially, a conventional test was conducted to assess the preliminary effects of bio-oil on the high-temperature and anti-aging properties of SBS and crumb rubber-modified asphalt. Subsequently, dynamic shear rheometer and bending beam rheometer tests were employed to evaluate the impact of bio-oil on the high- and low-temperature and anti-fatigue properties of SBS and crumb rubber-modified asphalt. Finally, fluorescence microscopy and Fourier transform infrared spectroscopy were used to examine the micro-dispersion state of the modifier and functional groups in bio-oil, SBS and crumb rubber composite-modified asphalts. The experimental results indicated that bio-oil increased the penetration of SBS and crumb rubber-modified asphalt, decreased the softening point and viscosity, and significantly improved its aging resistance. The addition of bio-oil enhanced the anti-fatigue properties of SBS and crumb rubber-modified asphalt. The optimal amount of added bio-oil was identified. Bio-oil also positively influenced the low-temperature properties of SBS and crumb rubber-modified asphalt. Although the addition of bio-oil had some adverse effects on the asphalt’s high-temperature properties, the asphalt mixture modified with bio-oil, SBS, and crumb rubber still exhibited superior high-temperature properties compared to unmodified asphalt. Furthermore, fluorescence microscopy and Fourier transform infrared spectroscopy results demonstrated that bio-oil can be uniformly dispersed in asphalt, forming a more uniform cross-linked structure and thereby enhancing the aging resistance of SBS and crumb rubber-modified asphalt. The modification process involved the physical blending of bio-oil, SBS, and crumb rubber within the asphalt. Comprehensive research confirmed that the addition of bio-oil has a significant and positive role in enhancing the properties of SBS and crumb rubber-modified asphalt with different composite crumb rubber particle size ratios.

This paper proposes a new kind of U-type reinforcement ferrule (URF) connection for the assembly of precast concrete (PC) components, which has a good fault-tolerance ability and low cost of construction with a simple post-grouting process. The modified connection features welded U ferrules, which can increase the bonding mechanism and internal stress transmission in the spliced region. A series of quasi-static cyclic tests were performed on URF-connected PC columns with different welding patterns. Comprehensive comparisons were performed on the load-bearing capacity, the plastic energy dissipation ability, the internal force transmission, the column ductility and the stiffness. The results indicated that PC columns with welded URF connections can ensure better lateral resistance than the cast-in-place concrete column. The weld type and length influence the connection performance, and the 15d-welded and full-length welded URF connections presented better connection performance and were suggested for the assembly of PC columns. Then, finite element analyses were performed to further reveal the working and failure mechanisms and the affecting mechanism of some working parameters. Parametric simulations indicated that the increase in the axial load ratio and the concrete strength in the postcast region had a slight but limited effect on improving the lateral resistance of the column connection.