A wearable textile antenna with dual-band and dual-sense characteristics is presented in this work. It operates at the 2.45 GHz band for WBAN and WLAN applications, and at the 1.575 GHz band for Global Positioning System (GPS) applications. An antenna backing based on an artificial magnetic conductor (AMC) plane operating at 2.45 GHz band is introduced to reduce the backward radiation and to improve antenna gain. It consists of a 3W3 array of square patch unit cells, where each unit cell is integrated with four square slits and a square ring. A square-shaped patch is then located on top of the substrate as its radiator. To enable dual-band operation, two corners of this radiator are truncated, with each of the four corners incorporated with a rectangular slit to enable its circular polarization characteristic in the GPS band. Simulation and experimental results are in good agreement and indicate proper antenna operation with linear polarization in the 2.45 GHz band and circular polarization in the 1.575 GHz band, with realized gain of 1.94 dBi and 1.98 dBic, respectively.

A radially periodic 2-D leaky-wave (LW) antenna is studied for the generation of zeroth-order Bessel beams within a limited spatial region and over a wide-frequency range. The antenna design is wideband and based on an annular metal strip grating placed on the top of a grounded dielectric slab, supporting a cylindrical leaky wave (CLW) with a fast backward spatial harmonic. The focusing capabilities of the relevant LW aperture fields are investigated over the considered frequency range (15-21 GHz), in conjunction with the dispersion analysis of the optimized structure, which is developed by means of an efficient in-house method of moments code. Full-wave simulations using a commercial tool including a simple coaxial feeder are presented and discussed, demonstrating the desired wideband operation. The antenna design is validated by means of measurements performed on a manufactured prototype, considering different frequencies and components of the electric field within the nondiffracting range of the system. The proposed design represents an attractive simple and low-cost solution potentially able to generate arbitrary-order Bessel beams at microwaves as well as in the millimeter-wave and terahertz frequency regions.

This article describes a full-bridge rectifier and a receiving antenna array for operation within an innovative wireless power transmission (WPT) system. A high-power transmitter using circularly polarized free-space waves and based on a retrodirective antenna array technology is also employed to boost the overall received RF power at the input of the rectenna. To the best of our knowledge, the proposed rectifier circuit and active antenna configuration are the first demonstration of a high-power beam tracking system for WPT scenarios, being different from previously reported near-field coupling and other lower power harvesting schemes. The main focus of this article is the rectifier design, its bench-top measurements, and operation in such a retrodirective, self-tracking microwave system. A novel approach based on in-phase multitone input signals is also developed to improve rectifier efficiency. The rectifier size is 4.5 cm by 2 cm and can offer more than 86% and 75% RF-to-dc rectification efficiency at 27 dBm for an input signal at 1.7 and 2.4 GHz, respectively. This rectifier circuit component can also be employed in other communication applications or WPT systems, for example, to convert to dc received RF signals or power in the radiating near- and far-field in order to wirelessly charge the batteries of home electronics, such as smartphones, tablets, or Internet of Things (IoT) devices.

This paper presents the design of a circularly polarized (CP) meshed patch antenna fully integrated within a solar panel for operation on CubeSats and other microsatellites. The structure has been designed to ensure optimal antenna performance at S-band as well as to minimize any shadowing effects that can reduce the received power at the solar cells. To generate CP, the antenna is driven by two orthogonal feed points, penetrating through a transparent borosilicate glass layer, as well as a silicon and PCB substrate. Simulated and measured performances, on both a preliminary FR4 design and a fully integrated prototype, demonstrate a good impedance bandwidth, satisfactorily axial ratio, as well as stable radiation patterns and minimum shadowing levels. The proposed antenna can be useful for communications between satellites as well as with the ground station, and since the structure is compact and completely integrated, the design can be an alternative approach to new-phased arrays on solar panels and other beam-steering systems.

Radio frequency fingerprint (RFF) identification distinguishes wireless transmitters by exploiting their hardware imperfection that is inherent in typical radio frequency (RF) front ends. This can reduce the risks for the identities of legitimate devices being copied, or forged, which can also occur in conventional software-based identification systems. This paper analyzes the feasibility of device identification exploiting the unique non-linear memory effect of the transmitter RF chains consisting of matched pulse shaping filters and non-linear power amplifiers (PAs). This unique feature can be extracted from the received distorted constellation diagrams (CDs) with the help of image recognition-based classification algorithms. In order to validate the performance of the proposed RFF approach, experiments are carried out in cabled and over the air (OTA) scenarios. In the cabled experiment, the average classification accuracy among systems of 8 PAs (4 PAs of the same model and the other 4 of different models) is around 92% at signal to noise ratio (SNR) of 10 dB. For the OTA line-of-sight (LOS) scenario, the average classification accuracy is 90% at SNR of 10 dB; for the non-line-of-sight (NLOS) scenario, the average classification accuracy is 79% at SNR of 12 dB.