Realizing improved strength–ductility synergy in eutectic alloys acting as in situ composite materials remains a challenge in conventional eutectic systems, which is why eutectic high-entropy alloys (EHEAs), a newly-emerging multi-principal-element eutectic category, may offer wider in situ composite possibilities. Here, we use an AlCoCrFeNi_2.1 EHEA to engineer an ultrafine-grained duplex microstructure that deliberately inherits its composite lamellar nature by tailored thermo-mechanical processing to achieve property combinations which are not accessible to previously-reported reinforcement methodologies. The as-prepared samples exhibit hierarchically-structural heterogeneity due to phase decomposition, and the improved mechanical response during deformation is attributed to both a two-hierarchical constraint effect and a self-generated microcrack-arresting mechanism. This work provides a pathway for strengthening eutectic alloys and widens the design toolbox for high-performance materials based upon EHEAs.

High-entropy herringbone alloy: Eutectic high-entropy alloys have a dual phase structure that could be useful for optimizing a material’s properties. Shi et al . found that directional solidification of an aluminum-iron-cobalt-nickel eutectic high-entropy alloy created a herringbone-patterned microstructure that was extremely resistant to fracture (see the Perspective by An). The structure contained lamellae of hard and soft phases, and the cracks that formed in the hard phase were arrested at the boundary of the soft phase. This, along with stress transfer, allowed a tripling of the maximal elongation while retaining high strength. —BG

Semitransparent organic solar cells (ST‐OSCs) offer potentially more opportunities in areas of self‐powered greenhouses and building‐integrated photovoltaic systems. In this work, the effort to use a combination of solution‐processable gold nanobipyramids (AuNBPs)‐based hole transporting layer and a low/high dielectric constant double layer optical coupling layer (OCL) for improving the performance of ST‐OSCs over the two competing indexes of power conversion efficiency (PCE) and average visible transmittance (AVT) is reported. The fabrication and characterization of the ST‐OSCs are guided, at design and analyses level, using the theoretical simulation and experimental optimization. The use of a low/high dielectric constant double layer OCL helps enhancing the visible light transparency while reflecting the near‐infrared (NIR) photons back into the photoactive layer for light harvesting. NIR absorption enhancement in the ST‐OSCs is realized through the AuNBPs‐induced localized surface plasmon resonance (LSPR). The weight ratio of the polymer donor to nonfullerene acceptor in the bulk heterojunction is adjusted to realize the maximum NIR absorption enhancement, enabled by the AuNBPs‐induced LSPR, achieving the high‐performance ST‐OSCs with a high PCE of 13.15% and a high AVT of 25.9%.

The strength−ductility trade-off exists ubiquitously, especially in brittle intermetallic-containing multiple principal element alloys (MPEAs), where the intermetallic phases often induce premature failure leading to severe ductility reduction. Hierarchical heterogeneities represent a promising microstructural solution to achieve simultaneous strength−ductility enhancement. However, it remains fundamentally challenging to tailor hierarchical heterostructures using conventional methods, which often rely on costly and time-consuming processing. Here, we report a multiscale microstructural inheritance and refinement strategy to process “structural hierarchy precursors” in as-cast heterogeneous Al _0.7 CoCrFeNi MPEAs, which lead directly to a hierarchical hetero-lamellar structure (HLS) after simple rolling and annealing. Interestingly, it takes only 10 min of annealing time, two orders of magnitude less than that required to render the state-of-the-art properties during conventional processing of Al _0.7 CoCrFeNi, for us to achieve record-high strength−ductility combinations via the hierarchical HLS design that sequentially stimulates multiple unusual deformation and reinforcement mechanisms. In particular, the HLS-enabled high hetero-deformation-induced (HDI) internal stress triggers profuse -type dislocations on over five independent slip systems in the supposedly brittle intermetallic phase and activates extensive stacking faults (SFs) and nanotwinning in the adjoining soft phase with a rather high SF energy. These unexpected, dynamically reinforcing hetero-deformation mechanisms across multiple length scales facilitate high sustained HDI strain hardening, along with a salient microcrack-mediated extrinsic ductilization effect, suggesting that the proposed microstructural inheritance and refinement strategy provides an efficient, fast, and low-cost approach to overcome the strength−ductility trade-off in a broad range of structural materials.

Eutectic high-entropy alloys (EHEAs) feature attractive strength–ductility balance at both ambient and cryogenic temperatures. Nevertheless, microstructural origins underpinning these balanced mechanical properties remain elusive. Here the deformation mechanisms of a recently-reported Al₁₉Co₂₀Fe₂₀Ni₄₁ EHEA were comparatively investigated at 298 and 77 K, which revealed a high frequency and density of dislocation multi-slip scenario in the soft eutectic lamellae and the corresponding compatible co-deformation in the adjacent hard lamellae that collectively endowed strong hetero-deformation-induced (HDI) hardening and excellent forest-dislocation hardening. Therefore, better ductility and tensile strength, in comparison to the other widely-studied EHEA system, could be sustained even at liquid-nitrogen temperatures. GRAPHICAL ABSTRACT IMPACT STATEMENT We identify a new eutectic HEA system with superior strength–ductility combination at liquid-nitrogen temperatures, and provide critical microstructural insights and mechanisms into its enhanced cryogenic properties.

Understanding how the magnetic fields affect the formation of reinforced phase during solidification is crucial to tailor the structure and therefor the performance of metal matrix in situ composites. In this study, a hypereutectic Al-40 wt.%Cu alloy has been directionally solidified under various axial magnetic fields and the morphology of Al₂Cu phase was quantified in 3D by means of high resolution synchrotron X-ray tomography. With rising magnetic fields, both increase of Al₂Cu phase’s total volume and decrease of each column’s transverse section area were found. These results respectively indicate the growth enhancement and refinement of the primary Al₂Cu phase in the magnetic field assisting directional solidification. The thermoelectric magnetic forces (TEMF) causing torque and dislocation multiplication in the faceted primary phases were thought dedicate to respectively the refinement and growth enhancement. To verify this, a real structure based 3D simulation of TEMF in Al₂Cu column was carried out and the dislocations in the Al₂Cu phase obtained without and with a 10T high magnetic field were analysed by the transmission electron microscope.