29 September 2020 in Journal of Materials Chemistry C
This review focusses on UV organic light-emitting diodes and organic solid-state lasers, and covers their recent development from organic chromophores and device configuration to practical applications.
8 July 2020 in Nature Communications
Hybrid plasmonic nano-emitters based on the combination of quantum dot emitters (QD) and plasmonic nanoantennas open up new perspectives in the control of light. However, precise positioning of any active medium at the nanoscale constitutes a challenge. Here, we report on the optimal overlap of antenna’s near-field and active medium whose spatial distribution is controlled via a plasmon-triggered 2-photon polymerization of a photosensitive formulation containing QDs. Au nanoparticles of various geometries are considered. The response of these hybrid nano-emitters is shown to be highly sensitive to the light polarization. Different light emission states are evidenced by photoluminescence measurements. These states correspond to polarization-sensitive nanoscale overlap between the exciting local field and the active medium distribution. The decrease of the QD concentration within the monomer formulation allows trapping of a single quantum dot in the vicinity of the Au particle. The latter objects show polarization-dependent switching in the single-photon regime.
17 July 2022 in Advanced Science
Semitransparent organic solar cells (ST‐OSCs) offer potentially more opportunities in areas of self‐powered greenhouses and building‐integrated photovoltaic systems. In this work, the effort to use a combination of solution‐processable gold nanobipyramids (AuNBPs)‐based hole transporting layer and a low/high dielectric constant double layer optical coupling layer (OCL) for improving the performance of ST‐OSCs over the two competing indexes of power conversion efficiency (PCE) and average visible transmittance (AVT) is reported. The fabrication and characterization of the ST‐OSCs are guided, at design and analyses level, using the theoretical simulation and experimental optimization. The use of a low/high dielectric constant double layer OCL helps enhancing the visible light transparency while reflecting the near‐infrared (NIR) photons back into the photoactive layer for light harvesting. NIR absorption enhancement in the ST‐OSCs is realized through the AuNBPs‐induced localized surface plasmon resonance (LSPR). The weight ratio of the polymer donor to nonfullerene acceptor in the bulk heterojunction is adjusted to realize the maximum NIR absorption enhancement, enabled by the AuNBPs‐induced LSPR, achieving the high‐performance ST‐OSCs with a high PCE of 13.15% and a high AVT of 25.9%.
11 January 2025 in Nature Communications
The artistic and scientific perspectives of the translucent color organic solar cells (OSCs), made with the emerging narrowband nonfullerene acceptors are explored. The translucent color OSCs, comprising a Fabry–Pérot microcavity optical coupling layer, have a power conversion efficiency of >15% and a maximum transparency of >20% for the three primary colors. The performance−color relationship of the translucent color OSCs is analyzed using a combination of high-throughput optical computing and experimental optimization, allowing light with desired color to pass through, while absorbing enough light to generate electricity. Replication of Piet Mondrian’s artwork “Composition C (1920)” is demonstrated using a 10 × 10 cm2-sized translucent OSC module with a wide palette of colors and hues. The outcome of the work offers an opportunity for translucent color OSCs to function as both esthetic art and power generating windowpanes for use in our homes, offices, and even greenhouses.
2 February 2024 in Advanced Materials
30 July 2023 in Advanced Energy Materials
Semitransparent organic solar cells (ST‐OSCs) can be made in different colors, allowing light to pass through, and yet absorb enough visible and near‐infrared (NIR) light to generate electricity. However, it remains a challenge to achieve high performing ST‐OSCs over the two competing indexes of power conversion efficiency (PCE) and average visible transmittance (AVT). This work reports an effort to develop record‐performance ST‐OSCs using a low/high index optical coupling layer (OCL) and a 2D photonic‐structured antireflective (AR) coating. High‐throughput optical screening is used to improve the understanding of OCL structure−performance relationships and the predicting of NIR absorption enhancement for ST‐OSCs. The concurrent use of a low/high index Na3AlF6 (170 nm)/ZnS (110 nm) OCL, identified among about 200 thousand simulated device configurations and a 900 nm pitch‐sized 2D photonic‐structured AR coating, fabricated using nanoimprint lithography, enables the record‐performance ternary PM6:BTP‐eC9:L8‐BO‐based ST‐OSCs, achieving simultaneously a record‐high PCE of 15.2%, a high AVT of 32%, an impressive light utilization efficiency of 4.86%, and a favorable color‐rendering index of 82. The results of the ST‐OSCs demonstrated in this work provide an attractive option for a plethora of applications in self‐powered greenhouses and building‐integrated photovoltaic systems.