Semitransparent organic solar cells (ST‐OSCs) offer potentially more opportunities in areas of self‐powered greenhouses and building‐integrated photovoltaic systems. In this work, the effort to use a combination of solution‐processable gold nanobipyramids (AuNBPs)‐based hole transporting layer and a low/high dielectric constant double layer optical coupling layer (OCL) for improving the performance of ST‐OSCs over the two competing indexes of power conversion efficiency (PCE) and average visible transmittance (AVT) is reported. The fabrication and characterization of the ST‐OSCs are guided, at design and analyses level, using the theoretical simulation and experimental optimization. The use of a low/high dielectric constant double layer OCL helps enhancing the visible light transparency while reflecting the near‐infrared (NIR) photons back into the photoactive layer for light harvesting. NIR absorption enhancement in the ST‐OSCs is realized through the AuNBPs‐induced localized surface plasmon resonance (LSPR). The weight ratio of the polymer donor to nonfullerene acceptor in the bulk heterojunction is adjusted to realize the maximum NIR absorption enhancement, enabled by the AuNBPs‐induced LSPR, achieving the high‐performance ST‐OSCs with a high PCE of 13.15% and a high AVT of 25.9%.
Improved efficiency and stability of the organic solar cells (OSCs) are the critical considerations for practical applications. The interface between the interlayer and bulk heterojunction has recently been shown as one of the weak links associated with the degradation in the nonfullerene acceptor (NFA)‐based OSCs. It shows that the removal of the interfacial chemical reactions between the 2‐(3‐oxo‐2,3‐dihydroinden‐1‐ylidene)malononitrile (INCN) moieties in NFA and poly(3,4‐ethylenedioxythiophene)‐polystyrene sulfonate (PEDOT:PSS) hole extraction layer (HEL) is desired for enhancing the device stability. In this work, we show that the use of a bilayer MoO3/antimonene HEL favors the operational stability in OSCs through maintaining a high built‐in potential and suppression of an undesired interfacial reaction between INCN moieties in NFA and the PEDOT structures in PEDOT:PSS. A power conversion efficiency of 16.68% is also obtained for the OSCs with a bilayer MoO3/antimonene HEL, prepared using a blend system of PM6:Y6, demonstrating its suitability for high‐performance OSCs. image