Nano zero-valent iron (NZVI) is widely used for reducing chlorinated organic pollutants in water. However, the stability of the particles will affect the removal rate of the contaminant. In order to enhance the stability of nano zero-valent iron (NZVI), the particles were modified with F-127 as an environmentally friendly organic stabilizer. The study investigated the effect of the F-127 mass ratio on the colloidal stability of NZVI. Results show that the sedimentation behavior of F-NZVI varied at different mass ratios. A biphasic model was used to describe the two time-dependent settling processes (rapid sedimentation followed by slower settling), and the settling rates were calculated. The surface morphology of the synthesized F-NZVI was observed with a scanning electron microscope (SEM), and the functional groups of the samples were analyzed with Fourier Transform Infrared Spectroscopy (FTIR). Results show that the F-127 was successfully coated on the surface of the NZVI, and that significantly improved the stability of NZVI. Finally, in order to optimize the removal rate of 2,4-dichlorophenol (2,4-DCP) by F-NZVI, three variables were tested: the initial concentration 2,4-DCP, the pH, and the F-NZVI dosage. These were evaluated with a Box-Behnken Design (BBD) of response surface methodology (RSM). The experiments were designed by Design Expert software, and the regression model of fitting quadratic model was established. The following optimum removal conditions were determined: pH = 5, 3.5 g·L−1 F-NZVI for 22.5 mg·L−1 of 2,4-DCP.
A simple formula for computing focal shifts in systems of different Fresnel numbers is proposed based on an analysis of factors that limit the extent of a focused field. This formula gives the focal shift accurately to about 2%, which is currently the best approximation that can be made.
1 January 2022 in Mathematical Biosciences and Engineering
Wireless body area networks (WBANs) is a new research hotspot with great development prospects. The non-contact sensing based on radio frequency signal can solve the issues of personal comfort and privacy. Detection of cervical motion range and cervical strain in time are important in diagnosis and prevention of cervical spondylosis. In this paper, channel state information is used to achieve smart perception and monitoring, timely and efficient detection of different postures and abnormal bending of the neck. It provides an efficient way for protecting cervical health, and also some help for doctors to understand the causes of cervical vertebral disease in a timely manner. The classification accuracy of the four activities reached 99.4%, 99.7%, 99.5% and 99.3%, respectively.
31 May 2023 in Environmental Science and Pollution Research
In this study, two-step methods were used to prepare sulfide nano-zero valent iron and the morphology, elemental composition, surface charge, crystal structure and elemental valence were characterised. The influence factors (S/Fe ratio, initial pH and initial concentration of Cr(VI)) and the mechanism of Cr(VI) removal was determined. The results revealed that the sulphide modification could increase the removal rate of chromium. The maximum removal rate of chromium was 81 mg/g, achieved at an S/Fe ratio of 0.1. The Cr(VI) removal process by S-nZVI0.1 is a multistep process, starting with strong adsorption to the surface of the particles by adsorption, followed by reduction of Cr(VI) to Cr(III), and finally fixing the contaminants on the S-nZVI0.1 surface by co-precipitation. This study has great significance for preparing a remediation material that could be efficiently used for repairing of Cr(VI) contaminated sites.