Guangxi Lu

Prof. Guangxi Lu


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 April 2020 in Metals
Verified
Journal Article
Open access
PDF file
QLQianqian Li
Qianqian Li
MLMengjia Li
Mengjia Li
GLGuangxi Lu
Guangxi Lu
SGShaokang Guan
Shaokang Guan
EZEngui Zhang
Engui Zhang
Cong XuCong Xu
Cong Xu
The influence of alloying elements Er, Zr, Cu, Si and Zn on the crystallization temperature interval, microstructure, mechanical properties and corrosion behavior of Al-Mg-Mn alloy were studied by differential scanning calorimetry (DSC), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), tensile testing, electrochemical measurements and nitric acid mass loss test (NAMLT). The results show that the crystallization temperature range of Al-Mg-Mn alloy with addition of Zn decreased 4.7 °C. Cold rolled alloys mainly contain S texture, Copper texture, Brass texture, and Goss texture; the content of the S texture is the highest. With the addition of trace elements, the second phase Al3Er, Al3Zr, Al2CuMg, Mg2Si and MgZn2 can be formed, which can improve the tensile strength and yield strength of Al-Mg-Mn alloy. The addition of the alloying element Zn can also improve the intergranular corrosion resistance of the Al-Mg-Mn alloy.

23 May 2025 in Metals
Verified
Journal Article
Open access
PDF file
LLLongfei Li
Longfei Li
XLXiao Long Li
Xiao Long Li
LSLei Shi
Lei Shi
SHShouzhi Huang
Shouzhi Huang
Cong XuCong Xu
Cong Xu
SGShaokang Guan
Shaokang Guan
As an eco-efficient short-process manufacturing technique for aluminum alloys, twin-belt continuous casting and direct rolling (TBCCR) demonstrates significant production advantages. In this study, an Al-Fe-Si alloy system with different Fe-rich intermetallics (α-AlFe(Mn)Si and β-AlFe(Mn)Si) via TBCCR was developed for new energy vehicle batteries, utilizing the Computer Coupling of Phase Diagrams and Thermochemistry (CALPHAD) technique. Comprehensive microstructure and surface segregation analyses of continuous casted ingots and direct-rolled sheets revealed that the Al-Fe-Si alloy with a combined Fe + Si content of 0.7% and an optimal Fe/Si atomic ratio of 3:1 (FS31) presents optimized mechanical properties: ultimate tensile strength of 145.8 MPa, elongation to failure of 5.7%, accompanied by a cupping value of 6.64 mm. Notably, Mn addition further refined the grain structure of casting ingots and enhanced the strength of both ingots and rolled sheets. Among the experimental alloys, FS14 (optimal Fe/Si atomic ratio of 1:4) sheets displayed the least surface segregation upon Mn incorporation. Through systematic optimization, an Al-Fe-Si-Mn alloy composition (Fe + Si = 0.7%, Fe/Si = 1:4 atomic ratio, 0.8 wt.% Mn) was engineered for TBCCR processing, achieving enhanced comprehensive performance: ultimate tensile strength of 189.4 MPa, elongation to failure of 7.32%, and cupping value of 7.71 mm. This composition achieves an optimal balance between grain refinement, mechanical properties (strength–plasticity synergy), formability (cupping value), and corrosion resistance (corrosion current density). The performance optimization strategy integrates synergistic improvements in strength, ductility, and corrosion resistance, providing valuable guidance for developing high-performance aluminum alloys suitable for the TBCCR process.

5 September 2024 in Metals
Verified
Journal Article
Open access
PDF file
GLGuangxi Lu
Guangxi Lu
YLYabo Liang
Yabo Liang
Cong XuCong Xu
Cong Xu
WRWenfei Rao
Wenfei Rao
YXYaodong Xue
Yaodong Xue
SGShaokang Guan
Shaokang Guan
Standard AA5083 (ZSE000), AA5083 modified with 0.3 wt.% Zr and 0.3wt.% Sc (ZSE330) and AA5083 modified with 0.3 wt.% Zr, 0.2wt.% Sc and 0.1wt.%Er(ZSE321) sheets were fabricated through a short process (including a simulated twin-belt continuous casting, subsequent direct rolling, intermediate annealing, cold rolling and stress-relief annealing) to systematically investigate the influence of partially substituting Er for Sc on the microstructure, mechanical properties and corrosion resistance of short-processed Al-4.7Mg-0.6Mn-0.3Zr-0.3Sc sheets. The results show that ZSE321 presents the optimal tensile properties (UTS: 541 MPa; 0.2%PS: 469 MPa and EF:7.7%) among the three experimental sheets. This is attributed to significant grain refinement, the inhibition of the recrystallization and promotion on the precipitation of Al3(Sc, Zr, Er) nanoparticles. Furthermore, the corrosion properties of the experimental sheets were also explored in this study, and the short-processed ZSE321 sheet presents the optimum corrosion resistance.

15 September 2021 in Journal of Alloys and Compounds
Verified
Journal Article
Closed access
HLHao Li
Hao Li
GLGuangxi Lu
Guangxi Lu
Cong XuCong Xu
Cong Xu
SGShaokang Guan
Shaokang Guan