Calcium-based binders, such as ordinary Portland cement (OPC) and lime (CaO), are the most common artificial cementitious materials used worldwide for concrete and soil improvement. However, using cement and lime has become one of the main concerns for engineers because they negatively affect the environment and economy, prompting research into alternative materials. The energy consumption involved in producing cementitious materials is high, and the subsequent CO2 emissions account for 8% of the total CO2 emissions. In recent years, an investigation into cement concrete’s sustainable and low-carbon characteristics has become the industry’s focus, achieved by using supplementary cementitious materials. This paper aims to review the problems and challenges encountered when using cement and lime. Calcined clay (natural pozzolana) has been used as a possible supplement or partial substitute to produce low-carbon cement or lime from 2012–2022. These materials can improve the concrete mixture’s performance, durability, and sustainability. Calcined clay has been utilized widely in concrete mixtures because it produces a low-carbon cement-based material. Owing to the large amount of calcined clay used, the clinker content of cement can be lowered by as much as 50% compared with traditional OPC. It helps conserve the limestone resources used in cement manufacture and helps reduce the carbon footprint associated with the cement industry. Its application is gradually growing in places such as Latin America and South Asia.
According to an extensive evaluation of published studies, there is a shortage of research on systematic literature reviews related to machine learning prediction techniques and methodologies in soil improvement using green materials. A literature review suggests that machine learning algorithms are effective at predicting various soil characteristics, including compressive strength, deformations, bearing capacity, California bearing ratio, compaction performance, stress–strain behavior, geotextile pullout strength behavior, and soil classification. The current study aims to comprehensively evaluate recent breakthroughs in machine learning algorithms for soil improvement using a systematic procedure known as PRISMA and meta-analysis. Relevant databases, including Web of Science, ScienceDirect, IEEE, and SCOPUS, were utilized, and the chosen papers were categorized based on: the approach and method employed, year of publication, authors, journals and conferences, research goals, findings and results, and solution and modeling. The review results will advance the understanding of civil and geotechnical designers and practitioners in integrating data for most geotechnical engineering problems. Additionally, the approaches covered in this research will assist geotechnical practitioners in understanding the strengths and weaknesses of artificial intelligence algorithms compared to other traditional mathematical modeling techniques.
The amount of waste, associated waste disposal costs, and environmental contamination may be minimized by identifying effective recycling approaches. These promising approaches will also lead to the protection of natural resources and economic gains. One example of waste disposal maybe by using it as a filling material or as a pozzolanic material for the production of concrete. In this regard, this study proposes to partially replace cement with aluminum dross and fly ash, and partially replace natural sand with quarry dust. Aluminum dross, cement, sand, and quarry dust were used in a variety of proportions with a constant percentage of fly ash for the design of nine concrete mixtures. Aluminum dross was replaced by 5, 10, 15, and 20% of the cement mass. At first, the optimum replacement of aluminum dross without using quarry dust was determined at a constant percentage of fly ash-15% based on the strength results. Later, by introducing the optimum substitution of aluminum dross with cement and fly ash, the quarry dust was partially replaced at 10, 20, 30, and 40% of river sand to determine the overall optimum mix. The mechanical and durability characteristics of the concrete using the three mixtures were analyzed. It has been observed that the mechanical and durability characteristics of a concrete mixture incorporating a fly ash-15%, aluminum dross-10%, and quarry dust-20% are better than that of standard concrete. Production of concrete using industrial waste can minimize infrastructure construction costs and reduce environmental impacts.
Marine clay soils are problematic soils in the construction industry when they are subjected to construction loads. When these soils are loaded, they lose their structure. This leads to the soil being unable to withstand loads of any magnitude without exhibiting significant, permanent deformations. In order to stabilize the marine soil, new methods for soil improvement were built upon biogrouting by incorporating physical, biological and chemical treatments into the soil. However, the biggest challenge of this method is the bacteria migration through the soil medium. To overcome this issue, the electrokinetic phenomenon can be utilized alongside biogrouting to prevent the bacteria migration. In this regard, the present study applied electrobiogrouting stabilization to investigate the improvement of acidic marine clay soil with a pH of 3.69. To accomplish this, two large-scale physical models with dimensions of 500 × 300 × 1200 mm were fabricated to examine the influence of two different treated distances between the inlet and outlet—450 mm (D45) and 600 mm (D60)—on the stability of the treated soil. It was observed that the shear strength of the treated soil improved significantly. The shear strength at the D45 treated distance increased from 3.65 kPa (untreated soil) to 28.14 kPa (treated soil). However, the strength increased by increasing the treated distance. In addition, compressibility and soil electrical conductivity were reduced significantly, and the Atterberg limits were significantly enhanced from OH to OL. The reasons for the enhancement of treated soil were the formation of CaCO3, which filled the soil voids, and that the water content was reduced. To address issues with marine clay soil, this study aims to minimize the high cost of a special foundation system and the use of non-environmentally friendly materials such as calcium-based binders, aside from the reduction of deformations caused by loading. The findings of this study can be used for acidic soils and the improvement of soil’s geotechnical behavior in general.
30 October 2019 in International Journal of Engineering and Advanced Technology
Weak and problematic soils affect stability and safety of structures founded on them. The problems occur due to limitation or absence of shear strength or over shear stress applied on the soil during loading which then lead to large settlement and consequently failure to the founded structures. Replacing the soil with better materials would be very costly as these types of soil are normally extended to a great depth under the ground surface. The proposed solution for such kind of soils is curing weak soils instead of replacing them. One of the proposed treatment methods is bio-grouting in which the conditions and the scales of the application differs according to the soil types and limitations. Reviews on previous researches have shown that treatment results by bio-grouting method are controlled by several factors, such as size of pores, value of pH, duration of treatment, presence of water and electro-kinetic effect, which give impact to treatment results quality and quantity. The outcome can go as far as killing the bacteria which then reduce the microbial growth if it was not controlled. Understanding of bio-grouting process and its application will help in improving the engineering properties of the weak soils and its applications.
Marine clay is a problematic soil because of its high compressibility and low shear strength, and it must be stabilized before construction. Cement and lime are the usual stabilizers, but both raise environmental concerns: they release significant CO₂ and are vulnerable to sulfate attack. Supplementary cementitious materials (SCMs) offer a more sustainable option. Calcined shale (CS), one such SCM, has performed well in concrete but has been little studied for soil stabilization. This study examines CS as a partial replacement for lime in marine clay, using a ternary mix of CS, palm oil fuel ash (POFA), and lime to improve both strength and durability. The work is divided into two parts. Part (1) treats marine clay with POFA and lime to find the best POFA dosage. Part (2) tests the CS–POFA–lime mix using unconfined compressive strength (UCS), flexural strength, durability, and microstructural analyses to identify the most effective blend. The results show that 3% lime is the optimum dosage, and that 10% CS with 5% POFA is the best combination for replacing part of the lime. Adding 5% lime alone increased UCS, flexural strength, and Young’s modulus by 152%, 50%, and 130%, respectively. Adding CS and POFA pushed these gains to 185%, 173%, and 230%. The findings show that CS, a locally available pozzolanic material, is an effective and more environmentally friendly partial substitute for lime in marine clay stabilization.